Garminメーカー7400 seriesの使用説明書/サービス説明書
ページ先へ移動 of 52
GPSMAP ® 7400/7600 Series Owner’s Manual June 2015 Printed in Taiwan 190-01841-00_0C.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Table of Contents Introduction ..................................................................... 1 Front View ................................................................................... 1 Accessing Owner's Manuals on the Chartplotter .
Changing the Sonar View .................................................... 16 Creating a Waypoint on the Sonar Screen ............................... 16 Measuring Distance on the Sonar Screen ................................ 16 Pausing the Sonar Display .
Resetting Trip Gauges ......................................................... 29 Viewing Graphs ........................................................................ 29 Setting the Graph Range and Time Scales ......................... 29 Tide, Current, and Celestial Information .
Copying Waypoints, Routes, and Tracks from HomePort to a Chartplotter ............................................................................... 40 Selecting a File Type for Third-Party Waypoints and Routes ... 40 Copying Data from a Memory Card .
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. The Garmin ® website at www.
All of the options along the bottom of the home screen are visible on all other screens, except for the Settings button. The Settings button is accessible only from the home screen. When viewing another screen, you can return to the home screen by selecting Home.
Navigation Chart : Shows navigation data available on your pre- loaded maps and from supplemental maps, if available. The data includes buoys, lights, cables, depth soundings, marinas, and tide stations in an overhead view.
Viewing Details about Navaids From the Navigation chart, Fishing chart, Perspective 3D chart view, or Mariner’s Eye 3D chart view, you can view details about various types of navigation aids, including beacons, lights, and obstructions. NOTE: The offshore Fishing chart is available with premium charts, in some areas.
Showing Satellite Imagery on the Navigation Chart NOTE: This feature is available with premium charts, in some areas. You can overlay high-resolution satellite images on the land or on both land and sea portions of the Navigation chart. NOTE: When enabled, high-resolution satellite images are present only at lower zoom levels.
1 From a chart or a 3D chart view, select Menu > Other Vessels > Display Setup . 2 Select an option: • To indicate the distance from your location in which AIS vessels appear, select Display Range , and select a distance. • To show MARPA-tagged vessels, select MARPA > Show .
Navigation and Fishing Chart Setup NOTE: Not all settings apply to all charts and 3D chart views. Some settings require external accessories or applicable premium charts.
Sonar Cone : Shows a cone that indicates the area covered by the transducer. Fish Symbols : Shows suspended targets. Navigation with a Chartplotter CAUTION If your vessel has an autopilot system, a dedicated autopilot control display must be installed at each steering helm in order to disable the autopilot system.
1 From the Home screen, select SOS . 2 Select the SOS type. 3 If necessary, select OK to navigate to the man overboard location. If you selected OK, the chartplotter sets a direct course back to the location. If you selected another type of SOS, the call details are sent to the VHF radio.
3 Select Add Turn . 4 Select the location of the next turn on the chart. 5 Select Add Turn . The chartplotter marks the location of the turn with a waypoint. 6 If necessary, repeat steps 4 and 5 to add more turns. 7 Select the final destination. Viewing a List of Routes Select Info > User Data > Routes & Auto Guidance Paths .
• To delete the path, select Cancel Auto Guidance . • To save the path, select Done . Adjusting a Saved Auto Guidance Path 1 Select Info > User Data > Routes & Auto Guidance Paths . 2 Select a path, and select Review > Edit > Adjust Path .
Setting the Color of the Active Track 1 Select Info > User Data > Tracks > Active Track Options > Track Color . 2 Select a track color. Saving the Active Track The track currently being recorded is called the active track. 1 Select Info > User Data > Tracks > Save Active Track .
Sail Racing You can use the device to increase the likelihood that your boat will cross the start line of a race exactly when the race begins. When you synchronize the race timer with the official race countdown timer, you are alerted at one-minute intervals as the race start approaches.
4 Enter the distance measured in step 1. Sailboat Autopilot Operation CAUTION When engaged, the autopilot controls only the rudder. You and your crew remain responsible for the sails while the autopilot is engaged. In addition to heading hold, you can use the autopilot to maintain a wind hold.
DownVü high-frequency sonar provides a clearer picture below the boat, providing a more detailed representation of structures the boat is passing over. Traditional transducers emit a conical beam. The DownVü scanning sonar technology emits a narrow beam, similar to the shape of the beam in a copying machine.
À Color legend Á Boat  Ping indicator à Fish Ä Bottom Å Range RealVü 3D Down Sonar View This sonar view shows a three-dimensional view of what is below the transducer and can be used when you are stationary and want to see what is around your boat.
by adjusting the brightness for DownVü and SideVü/DownVü transducers. If you want to see the highest intensity signal returns on the screen, you can lower the gain or brightness to remove lower intensity returns and noise. If you want to see all return information, you can increase the gain or brightness to see more information on the screen.
Viewing two frequencies concurrently using the split-frequency view allows you to see deeper with the lower frequency return and, at the same time, see more detail from the higher frequency return. Selecting Frequencies NOTE: You cannot adjust the frequency for all sonar views and transducers.
Appearance : Configures the appearance of the sonar screen ( Sonar Appearance Settings , page 19 ). Alarms : Sets sonar alarms ( Sonar Alarm Settings , page 19 ). Advanced : Configures various sonar display and data source settings ( Advanced Sonar Settings , page 19 ).
resolution, but is the most susceptible to noise. With echo stretch set to high and filter width set to low, the display has a lower resolution, but has wider targets. With echo stretch and filter width set to high, the display has the lowest resolution, but is the least susceptible to noise.
The Radar overlay displays data based on the most recently used radar mode. Dual Range Mode : Provides a side-by-side view of both short- range and long-range radar data. Changing the Radar Mode 1 From a combination screen or SmartMode layout with radar, select Menu > Radar Menu > Change Radar .
including the range, bearing, speed, GPS heading, nearest approach, and time to nearest approach. MARPA indicates the status of each tagged object (acquiring, lost, tracking, or dangerous), and the chartplotter can sound a collision alarm if the object enters your safe zone.
situation should be avoided by using boat-heading data from an electronic compass. If the boat heading is based on data from a magnetic heading sensor or an automatic pilot, the heading data could be compromised due to incorrect setup, mechanical malfunction, magnetic interference, or other factors.
Reducing the gain to eliminate side-lobe interference may cause smaller or distant targets to blink or disappear from the Radar screen. Adjusting Sea Clutter on the Radar Screen Automatically You can set the chartplotter to automatically adjust the appearance of clutter caused by choppy sea conditions.
1 From a Radar screen or the Radar overlay, select Menu > Radar Setup > Front of Boat . 2 Select Up or Down to adjust the offset. Selecting a Different Radar Source 1 Select an option: • From a radar screen or the radar overlay, select Menu > Radar Setup > Source .
2 If necessary, select Time , and select a time for the autopilot to steer one complete circle. 3 Select Engage Port or Engage Starboard . Setting Up and Following the Zigzag Pattern You can use the zigzag pattern to steer the boat from port to starboard and back, over a specified time and angle, across your present heading.
Man-Overboard Distress Calls Initiated from a VHF Radio When the chartplotter is connected to a compatible VHF radio with NMEA 2000, and you initiate a man-overboard DSC distress call from the radio, the chartplotter shows the man- overboard screen and prompts you to navigate to the man- overboard point.
Viewing the Gauges 1 Select A/V, Gauges, Controls . 2 Select a gauge. 3 Select or to view a different gauge page. Changing the Data Shown in a Gauge 1 From a gauges screen, hold a gauge.
2 Select GPS Hdg. or Magnetic . NOTE: When moving at low speeds or when stationary, the magnetic compass source is more accurate than the GPS source. Customizing the Close-Hauled Wind Gauge You can specify the range of the close-hauled wind gauge for both the upwind scale and the downwind scale.
2 Select Info > Warning Manager > Save to Card . Clearing all of the Messages Select Info > Warning Manager > Clear Warning Manager . Media Player NOTE: The media player feature is not compatible with all chartplotter models.
SiriusXM ® Satellite Radio When you have a FUSION-Link capable stereo and SiriusXM Connect Tuner installed and connected to the chartplotter, you may have access to SiriusXM satellite radio, depending on your subscription.
SiriusXM Equipment and Subscription Requirements To use satellite weather, you must have a compatible satellite weather receiver. To use SiriusXM satellite radio, you must have a compatible satellite radio receiver. Go to www.garmin.com for more information.
2 Pan the chart to an offshore location. The Marine Forecast or Offshore Forecast options appear when forecast information is available. 3 Select Marine Forecast or Offshore Forecast . City Forecasts City forecasts appear as weather symbols. The forecast is viewed in 12-hour increments.
Viewing Buoy Reports Report readings are taken from buoys and coastal observation stations. These readings are used to determine air temperature, dew point, water temperature, tide, wave height and period, wind direction and speed, visibility, and barometric pressure.
1 From a video screen, touch the screen. The video controls appear on the screen. 2 Select a video preset. The camera restores the video settings saved for that preset. TIP: You can also save and activate presets using the video menu. Camera Settings Some cameras provide additional options to control the camera view.
• To allow the chartplotter to automatically select the source format, select Standard > Auto . Configuring the PC Display Before you can configure the PC display mode, you must set the video source to analog or digital PC. 1 When in PC display mode, select anywhere on the screen.
Units : Sets units of measure. Language : Sets the on-screen text language. Navigation : Sets navigation preferences. Keyboard Layout : Arranges the keys on the on-screen keyboard. Screenshot Capture : Allows the device to save images of the screen. User Data Sharing : Allows you to share waypoints and routes over the Garmin Marine Network.
• If the turns in the Auto Guidance line are too wide, select Settings > Preferences > Navigation > Auto Guidance > Shoreline Distance > Nearest .
Setting the Keel Offset You can enter a keel offset to compensate the surface reading for the depth of a keel, making it possible to measure depth from the bottom of the keel instead of from the transducer location. Enter a positive number to offset for a keel.
You can connect multiple wireless devices to the chartplotter to share data. 1 From the wireless device, turn on the Wi ‑ Fi technology and search for wireless networks. 2 Select the name of your chartplotter wireless network ( Setting Up the Wi ‑ Fi ® Wireless Network , page 39 ).
Restoring Backup Data to a Chartplotter 1 Insert a memory card into a card reader that is attached to the computer. 2 Copy a backup file from the computer to the memory card, into a folder named GarminUserData. 3 Insert a memory card into the card slot.
point does not appear where the point should be, the map datum and position format of the device may not match the map datum and position format originally used to mark the waypoint. Position format is the way in which the GPS receiver's position appears on the screen.
organization, and code of the Software, for which source code is not provided, are valuable trade secrets of Garmin and/or its third-party providers and that the Software in source code form remains a valuable trade secret of Garmin and/or its third-party providers.
Index A aerial photos 5 AIS 5–7 distress signal device 6 radar 22 SART 6 targeting 5, 6 threats 6, 22 turning on 39 alarms 38 anchor drag 38 arrival 38 collision .
trails 7 P Perspective 3D 34 photos, aerial 5 position, tracking 27 position report 27 power key 36 powerboat 2, 12, 39 preferred data source 25 premium charts 4, 5, 7 aeria.
www.garmin.com/support +43 (0) 820 220230 + 32 2 672 52 54 0800 770 4960 1-866-429-9296 +385 1 5508 272 +385 1 5508 271 +420 221 985466 +420 221 985465 + 45 4810 5050 + 358 9 6937 9758 + 331 55 69 33 .
デバイスGarmin 7400 seriesの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Garmin 7400 seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGarmin 7400 seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Garmin 7400 seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Garmin 7400 seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Garmin 7400 seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGarmin 7400 seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Garmin 7400 seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGarmin 7400 seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
