GarminメーカーeTrex Venture Cx, Legend Cxの使用説明書/サービス説明書
ページ先へ移動 of 96
eT r ex V entur e ® Cx owner’ s manual personal navigator ® and Legend ® Cx eT rex Legend Cx eT rex V enture Cx.
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin.
eT rex V enture Cx and Legend Cx Owner ’s Manual i I NTRODUCTION > A BOUT T HIS M ANUAL I NTRODUCTION Thank you for choosing the Garmin ® eT rex Legend ® Cx or the eT rex ® V enture Cx. These products use the proven performance of Garmin GPS and full- featured mapping to create an unsurpassed portable GPS receiver .
ii eT rex V enture Cx and Legend Cx Owner ’s Manual I NTRODUCTION > T ABLE OF C ONTENTS T able of Contents Introduction ....................................................... i About This Manual .............................................. i Manual Conventions .
eT rex V enture Cx and Legend Cx Owner ’s Manual iii I NTRODUCTION > T ABLE OF C ONTENTS Searching for a Point of Interest ............................25 Custom Points of Interest ......................................26 Using T racks ...........
iv eT rex V enture Cx and Legend Cx Owner ’s Manual I NTRODUCTION > T ABLE OF C ONTENTS Calculator .......................................................... 65 Stopwatch ......................................................... 65 Sun and Moon .
eT rex V enture Cx and Legend Cx Owner ’s Manual v I NTRODUCTION > S OFTW ARE L ICENSE A GREEMENT AND P RODUCT R EGISTRA TION Software License Agreement BY USING THE eT rex Legend Cx OR THE eT rex V enture Cx, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTW ARE LICENSE AGREEMENT .
vi eT rex V enture Cx and Legend Cx Owner ’s Manual I NTRODUCTION > C ARING FOR THE L EGEND C X Caring for you eT rex The case is constructed of high-quality materials and does not require user maintenance except cleaning.
eT rex V enture Cx and Legend Cx Owner ’s Manual vii I NTRODUCTION > W ARNING Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury .
viii eT rex V enture Cx and Legend Cx Owner ’s Manual I NTRODUCTION > C AUTION Failure to avoid the following potentially hazardous situations may result in injury or property damage.
eT rex V enture Cx and Legend Cx Owner ’s Manual 1 G ETTING S T ARTED > U NIT O VERVIEW G ETTING S T ARTED Unit Overview Carry Lanyard attachment slots Battery compartment cover Battery compartme.
2 eT rex V enture Cx and Legend Cx Owner ’s Manual G ETTING S T ARTED > U NIT O VERVIEW Installing the Batteries The eT rex operates on two AA batteries (not included), which are installed in the back of the unit. Y ou can use Alkaline or NiMH batteries.
eT rex V enture Cx and Legend Cx Owner ’s Manual 3 G ETTING S T ARTED > K EY F UNCTIONS Legend Cx Key Functions In/Out zoom keys • From the Map Page, press to zoom the map in or out. • From any other page, press to scroll up or down a list or move a high- lighted slider .
4 eT rex V enture Cx and Legend Cx Owner ’s Manual G ETTING S T ARTED > T URNING ON THE E T REX T urning on the eT rex When you turn on the eT rex, the W elcome page appears, followed by the Satellite Page. The unit must collect satellite data and establish its current location.
eT rex V enture Cx and Legend Cx Owner ’s Manual 5 G ETTING S T ARTED > I NITIALIZING THE GPS R ECEIVER Initializing the GPS Receiver The first time you turn on your eT rex, the GPS receiver must collect satellite data and establish its current location.
6 eT rex V enture Cx and Legend Cx Owner ’s Manual G ETTING S T ARTED > U SING THE E T REX Using the eT rex This section explains how to enter and select information with the eT rex. Understanding T erms As you progress through this manual, you are directed to press a specific key or highlight a field on the screen.
eT rex V enture Cx and Legend Cx Owner ’s Manual 7 G ETTING S T ARTED > U SING THE E T REX Selecting Options and Entering Data Use the Rocker to highlight, select, or choose an item in a list or a field on the screen. T o select and activate an option: 1.
8 eT rex V enture Cx and Legend Cx Owner ’s Manual G ETTING S T ARTED > U SING THE E T REX On-Screen Messages When a significant event in the operation of the unit occurs, an on-screen message appears to advise you of the occurrence. In each case, the condition is described and often a remedy is provided.
eT rex V enture Cx and Legend Cx Owner ’s Manual 9 G ETTING S T ARTED > U SING THE E T REX Transferring Data to a microSD Card The eT rex utilizes a microSD card to store detailed MapSource map data. T o install or remove the microSD card: 1. Remove the battery compartment cover from the back of the unit.
10 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > C REA TING AND U SING W A YPOINTS B ASIC O PERA TION This section explains some of the more common operations performed with your eT rex, including creating and using waypoints, using the Find Menu, and how to create and use tracks and routes.
eT rex V enture Cx and Legend Cx Owner ’s Manual 1 1 B ASIC O PERA TION > C REA TING AND U SING W A YPOINTS Creating Waypoints Using the Map Y ou can quickly create a waypoint using the Map Page. When you pan the map and move the arrow over a map item, you can see a highlighted description of the item.
12 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > C REA TING AND U SING W A YPOINTS 4. Press Quit to exit. Editing Waypoints Y ou can edit waypoints to change the symbol, name, note, location, elevation, and depth. T o edit a waypoint: 1.
eT rex V enture Cx and Legend Cx Owner ’s Manual 13 B ASIC O PERA TION > C REA TING AND U SING W A YPOINTS T o move a waypoint on the Map Page: 1. On the Find Menu, highlight the W aypoints icon, and press Enter to open the W aypoints Page. 2. Select the waypoint you want to move, and press Enter .
14 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > C REA TING AND U SING W A YPOINTS 6. Press Enter to save the location. Projecting a Waypoint Y ou can create a new waypoint by projecting the distance and bearing from one location to a new location.
eT rex V enture Cx and Legend Cx Owner ’s Manual 15 B ASIC O PERA TION > C REA TING AND U SING W A YPOINTS Using Proximity Waypoints Use the Proximity W aypoints Page to define an alarm circle around a stored waypoint location. T o add a proximity waypoint: 1.
16 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > U SING THE F IND M ENU T o clear one or all proximity waypoints from the list: T o remove or review a single entry , press Enter . OR T o remove all waypoints from the list, press the Menu key , highlight Remove All , and press Enter .
eT rex V enture Cx and Legend Cx Owner ’s Manual 17 B ASIC O PERA TION > U SING THE F IND M ENU The options menu for each category contains a submenu of search options, such as Find By Name, Find.
18 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > U SING THE F IND M ENU Recent Finds The Recent Finds Page shows a list of the last 50 items you have searched for or gone to recently . T o go to a recently found item: 1. Press and hold the Find key to open the Find Menu.
eT rex V enture Cx and Legend Cx Owner ’s Manual 19 B ASIC O PERA TION > U SING THE F IND M ENU • Project W aypoint —create a new waypoint by referencing another location by entering bearing and distance from the referenced location. See page 14 for more information.
20 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > U SING THE F IND M ENU 3. Press the Menu key to open the Options Menu, highlight Change Reference , and press Enter . The Map Page appears. 4. Use the Rocker to pan the arrow (pointer) to the map location you want, and press Enter .
eT rex V enture Cx and Legend Cx Owner ’s Manual 21 B ASIC O PERA TION > U SING THE F IND M ENU Geocache Setup instructions on page 61 and www .garmin.com/products/etrexLegendcx/. T o find a geocache: 1. Press and hold the Find key to open the Find Menu.
22 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > U SING THE F IND M ENU Finding a City Use the Cities icon on the Find Menu to find any city listed in the mapping database (either in the basemap or from downloaded detailed mapping data).
eT rex V enture Cx and Legend Cx Owner ’s Manual 23 B ASIC O PERA TION > U SING THE F IND M ENU 4. Select a service from the list, and press Enter to open the information page for the selected service. Finding an Address If you downloaded detailed mapping data, use the Addresses icon on the Find Menu to find an address.
24 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > U SING THE F IND M ENU 3. Highlight the < Enter Number > field, and press Enter . 4. T ype the street number using the on-screen keypad. When finished, highlight OK and press Enter again.
eT rex V enture Cx and Legend Cx Owner ’s Manual 25 B ASIC O PERA TION > U SING THE F IND M ENU 6. Repeat steps 4 and 5 to enter a street name in the <Enter Street 2> field. When finished, a list of matches appears below . 7. Select an intersection, and press Enter to open the information page.
26 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > U SING T RACKS 4. Highlight the item you want from the list, and press Enter to open the information page for the selected item.
eT rex V enture Cx and Legend Cx Owner ’s Manual 27 B ASIC O PERA TION > U SING T RACKS 2. Select the T racks icon, and press Enter to open the T racks Page 3. Highlight the Clear button, and press Enter . A confirmation message appears. T o set up a track log: 1.
28 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > U SING T RACKS T o save the entire track log: 1. Press Menu twice to open the Main Menu. 2. Select the T racks icon, and press Enter to open the T racks Page. 3 Highlight the Save button and press Enter .
eT rex V enture Cx and Legend Cx Owner ’s Manual 29 B ASIC O PERA TION > U SING T RACKS 2. Highlight the Log T rack to Data Card option, and then press ENTER to activate the feature. Observe that a current date .gpx file appears in the Data Card T racks list.
30 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > U SING T RACKS 3. Press Enter to start the area calculation. As you begin to move and define the area’s boundaries, a Stop button appears at the bottom of the page. 4. When finished defining the area, press Enter to open the page with a Save button.
eT rex V enture Cx and Legend Cx Owner ’s Manual 31 B ASIC O PERA TION > C REA TING AND U SING R OUTES T o create a user waypoint on a saved track: 1 . With a saved track shown on the map, use the Rocker to move the pointer on the track point that you want to mark as a user waypoint.
32 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > C REA TING AND U SING R OUTES 5. Use the Find Menu to select a route waypoint from one of the Find Menu groups, and open the information page for the selected waypoint, city , exit, point of interest, and so on.
eT rex V enture Cx and Legend Cx Owner ’s Manual 33 B ASIC O PERA TION > C REA TING AND U SING R OUTES 2. Highlight the Routes icon, and press Enter to open the Routes Page. 3. Highlight a saved route, and press Enter to open the Route Page. 4. Highlight the Navigate button, and press Enter .
34 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > C REA TING AND U SING R OUTES Editing a Route After you create a route, use the Route Page to edit, change the route name, and review route points. T o change the name of the route: 1.
eT rex V enture Cx and Legend Cx Owner ’s Manual 35 B ASIC O PERA TION > C REA TING AND U SING R OUTES 4. Highlight a point on the Route Page, and press Enter to open an options menu. 5. Highlight Review , and press Enter to open the information page for the route point.
36 eT rex V enture Cx and Legend Cx Owner ’s Manual B ASIC O PERA TION > C REA TING AND U SING R OUTES Using the Route Page Options The Route Page shows all points stored in memory for the route selected on the Routes Page. Press the Menu key to open the Route Page Options Menu.
eT rex V enture Cx and Legend Cx Owner ’s Manual 37 M AIN P AGES > O VERVIEW M AIN P AGES The eT rex has three main pages: Map Page, Compass Page, and the Main Menu. Y ou can cycle through these pages by pressing the Quit key . Additional pages are added using the Page Sequence option on the Main Menu.
38 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN P AGES > S A TELLITE P AGE Satellite Page The Satellite Page shows the receiver status, satellite locations, satellite signal strength, and the receiver ’ s current location when the unit receives signals from at least three satellites.
eT rex V enture Cx and Legend Cx Owner ’s Manual 39 M AIN P AGES > M AP P AGE Map Page The eT rex comes with a built-in basemap that includes a database of cities, interstates, state and county highways, exit information, and lake and river outlines.
40 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN P AGES > M AP P AGE T o change a data field display: 1. Press the Menu key to open the Map Page Options Menu. 2. Highlight Change Data Fields , and press Enter . The first data field is highlighted.
eT rex V enture Cx and Legend Cx Owner ’s Manual 41 M AIN P AGES > M AP P AGE Changing the Zoom Range Y ou can change the zoom range on the Map Page to view a smaller area in greater detail or view a larger area with less detail.
42 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN P AGES > M AP P AGE • Change Data Fields —allows you to select the type of data you want to show in the data fields. This option is available only if 2, 3, or 4 data fields is selected.
eT rex V enture Cx and Legend Cx Owner ’s Manual 43 M AIN P AGES > M AP P AGE Setting up the Map Page Use the Setup Map option to adjust how items are shown on the Map Page. T o customize the Map Page display: 1. Press the Menu key to open the Map Page Options Menu.
44 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN P AGES > M AP P AGE • Lock On Road —locks the map pointer to display on the nearest road, compensating for variances in map position accuracy .
eT rex V enture Cx and Legend Cx Owner ’s Manual 45 M AIN P AGES > M AP P AGE Map Setup – T ext Page Use the Map Setup – T ext Page to select the text size for descriptions of map items on the Map Page. Y ou can select from Small , Medium , or Large .
46 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN P AGES > M AP P AGE Measuring Distance Y ou can measure the distance between two map items. T o measure distance between two points: 1. Press the Menu key to open the Map Page Options Menu.
eT rex V enture Cx and Legend Cx Owner ’s Manual 47 M AIN P AGES > M AP P AGE Turning Declutter On or Of f Y ou can remove unwanted items from the Map Page display (declutter the display), such as map item titles and icons.
48 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN P AGES > C OMP ASS P AGE Compass Page During active navigation, the Compass Page guides you to your destination with a graphic compass display and a Bearing Pointer . When navigating, the Compass Page provides navigation data and directions.
eT rex V enture Cx and Legend Cx Owner ’s Manual 49 M AIN P AGES > C OMP ASS P AGE Compass Page Options Use the options menu to customize the Compass Page. W ith the Compass Page open, press the Menu key . T o select an option, highlight it, and press Enter .
50 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN P AGES > C OMP ASS P AGE Using the Course Pointer or Bearing Pointer The bearing pointer and course pointer work independently of each other .
eT rex V enture Cx and Legend Cx Owner ’s Manual 51 M AIN P AGES > C OMP ASS P AGE T o select the course pointer or the bearing pointer: 1. Press the Menu key to open the Compass Page Options Menu. The bearing pointer is the factory set default option.
52 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN P AGES > T RIP C OMPUTER P AGE T o change data fields: 1. Press the Menu key to open the Compass Page Options Menu. 2. Highlight Change Data Fields , and press Enter . The first data field is highlighted.
eT rex V enture Cx and Legend Cx Owner ’s Manual 53 M AIN P AGES > T RIP C OMPUTER P AGE Trip Computer Page Options Menu The following options are available: Reset —because you want to record new data for each trip, a “Reset” option is available.
54 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN M ENU > T RACKS Main Menu M AIN M ENU The Main Menu contains settings and features not found on the main pages and sub-menus. The time and date are shown at the bottom of this page. The Main Menu is accessible from any page by pressing Menu twice.
eT rex V enture Cx and Legend Cx Owner ’s Manual 55 M AIN M ENU > H IGHW A Y P AGE Track Page Options The T rack Log Setup Page contains the following options: • Wrap When Full —enables this option when you want to record over the oldest data with new data when the track log is full.
56 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN M ENU > S ETUP M ENU The Highway graphic provides visual guidance, taking you point by point to your final destination. Y our course is represented by a center line down the middle of the graphic.
eT rex V enture Cx and Legend Cx Owner ’s Manual 57 M AIN M ENU > S ETUP M ENU System Setup Use the System Setup Page to control settings for GPS, W AAS, battery type, language, external power and proximity alarms. T o access the System Setup Page: On the Setup Menu Page, highlight the System icon, and press Enter .
58 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN M ENU > S ETUP M ENU T o access the Display Setup Page: On the Setup Menu Page, highlight the Display icon, and press Enter . • Display Mode —sets the display to Day , Night , or Auto mode.
eT rex V enture Cx and Legend Cx Owner ’s Manual 59 M AIN M ENU > S ETUP M ENU 4. Double-click on a PC’s My Computer to observe a new Removable Disk Drive listed. If drives are networked, see the note below . If using a Macintosh, double-click on the icon to view the directory of files on the microSD card.
60 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN M ENU > S ETUP M ENU T o access the Page Sequence Setup Page: On the Setup Menu Page, highlight the Page Sequence icon, and press Enter . T o move a page: T o move a page in the order , highlight the page, and press Enter .
eT rex V enture Cx and Legend Cx Owner ’s Manual 61 M AIN M ENU > S ETUP M ENU Follow Road Options Routing Setup Page before the route is calculated. Faster T ime —calculated routes are faster to drive but might be longer in distance. Shorter Distance —calculated routes are shorter in distance but take more time to drive.
62 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN M ENU > S ETUP M ENU NOTE: Befor e setting up and placing physical geocache stations on public or private land, be certain you ar e not in violation of or dinances or laws governing use of these pr operties.
eT rex V enture Cx and Legend Cx Owner ’s Manual 63 M AIN M ENU > S ETUP M ENU Units Setup Use the Units Setup Page to customize units of measure. T o access the Interface Setup Page: On the Setup Menu Page, highlight the Units icon, and press Enter .
64 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN M ENU > P ROXIMITY W A YPOINTS AND C ALENDAR Welcome Page Setup Use the W elcome Page Setup to insert a message, such as ownership information, that appears when you turn on your eT rex.
eT rex V enture Cx and Legend Cx Owner ’s Manual 65 M AIN M ENU > C ALCULA TOR AND S TOPW A TCH 6. T o remove points from a Day Page, press the Menu key to open the Options Menu. Select Remove Points , and press Enter to display the Remove Points Options List.
66 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN M ENU > S UN AND M OON T o stop the stopwatch: Highlight the Stop button, and press Enter to stop the stopwatch. T o use the lap feature: With the stopwatch running, highlight the Lap button, and press Enter .
eT rex V enture Cx and Legend Cx Owner ’s Manual 67 M AIN M ENU > H UNT AND F ISH T o view sun and moon locations for a specified time, date, and location: 1. Press the Menu key twice to open the Main Menu. 2. Select the Sun & Moon icon, and press Enter .
68 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN M ENU > G AMES M ENU Games Menu The Games Menu contains six games (Memory Race, V irtua Maze, GekoSmak, Nibbons, Gekoids, and Beast Hunt) for entertainment. Some games use GPS as a virtual component during play .
eT rex V enture Cx and Legend Cx Owner ’s Manual 69 M AIN M ENU > G AMES M ENU T o adjust the grid or square size in custom mode: 1. Highlight the Grid Size or Square Size field, and press Enter to select from the options lists. Press Enter to make your selection.
70 eT rex V enture Cx and Legend Cx Owner ’s Manual M AIN M ENU > G AMES M ENU Nibbons In this GPS game, you must walk around the board collecting the flags as they appear . As you walk, your “tail” grows. Y ou may travel anywhere on the screen, but you cannot walk on your tail, or you lose a life.
eT rex V enture Cx and Legend Cx Owner ’s Manual 71 M AIN M ENU > G AMES M ENU Beast Hunt Although not a true GPS game, Beast Hunt requires some navigation skills, in which you must find and defeat the dragon with an arrow before it breathes fire at you or you fall into one of the pits while navigating a maze of platforms.
72 eT rex V enture Cx and Legend Cx Owner ’s Manual A PPENDIX > S PECIFICA TIONS A PPENDIX Specifications Physical Size: 4.2" H x 2.2" W x 1.2" D W eight: 5.6 ounces (159 g) with batteries installed. Display: 1.3" W x 1.7" H, 256-color, high resolution, transreflective TFT(176 x 220 pixels) Backlit.
eT rex V enture Cx and Legend Cx Owner ’s Manual 73 A PPENDIX > O PTIONAL A CCESSORIES Optional Accessories Several optional accessories are available to enhance the operation of your eT rex. T o obtain replacement parts and optional accessories, contact your Garmin Dealer , or Garmin Product Support in the U.
74 eT rex V enture Cx and Legend Cx Owner ’s Manual A PPENDIX > D A T A F IELD D EFINITIONS Data Field Definitions The following list provides a brief definition of each data field option. Accuracy Of GPS —the current accuracy of your GPS- determined location.
eT rex V enture Cx and Legend Cx Owner ’s Manual 75 A PPENDIX > D A T A F IELD D EFINITIONS Speed - Moving A vg. —the average speed while your vehicle was moving. Speed — Overall A vg .—the average speed determined by both the moving and stopped time and speed.
76 eT rex V enture Cx and Legend Cx Owner ’s Manual A PPENDIX > C ONNECTING Y OUR L EGEND C X T O A C OMPUTER Connecting Y our eT rex to a Computer Y ou can connect your eTrex to your computer using the PC/USB connector cable.
eT rex V enture Cx and Legend Cx Owner ’s Manual 77 A PPENDIX > W HA T I S WAAS/EGNOS? What Is W AAS/EGNOS? The W ide Area Augmentation System (W AAS) is an F AA funded service to improve the overall integrity of the GPS signal for users in North America.
78 eT rex V enture Cx and Legend Cx Owner ’s Manual A PPENDIX > M AP D A TUMS AND L OCA TION F ORMA TS Map Datums and Location Formats What Are Map Datums? A datum is a mathematical model of the Earth that approximates the shape of the Earth, and enables calculations to be carried out in a consistent and accurate manner .
eT rex V enture Cx and Legend Cx Owner ’s Manual 79 A PPENDIX > L ORAN TD S ETUP Loran TD Setup T o set up Loran TD from the Setup Menu: 1. Press Menu twice to open the Main Menu. 2. Use the Rocker to highlight the Setup icon, and press Enter to open the Setup Menu.
80 eT rex V enture Cx and Legend Cx Owner ’s Manual A PPENDIX > R EGULA TORY C OMPLIANCE Regulatory Compliance FCC Compliance The eT rex Legend Cx and V enture Cx comply with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE.
eT rex V enture Cx and Legend Cx Owner ’s Manual 81 A PPENDIX > L IMITED W ARRANTY Limited W arranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. W ithin this period, Garmin will at its sole option repair or replace any components that fail in normal use.
82 eT rex V enture Cx and Legend Cx Owner ’s Manual A PPENDIX > L IMITED W ARRANTY Garmin International, Inc. 1200 E 151st Street, Olathe, Kansas 66062 U.S.A. T el. 913/397.8200 Fax. 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey , SO51 9DL U.
eT rex V enture Cx and Legend Cx Owner ’s Manual 83 I NDEX I NDEX A accessories 73 adjusting the backlight 4 altimeter page 52 plot over time 52 C calendar 64 cautions viii cleaning vi compass beari.
84 eT rex V enture Cx and Legend Cx Owner ’s Manual I NDEX S satellite page 38 Options 38 selecting options and entering data 7 setup menu 56 display setup 57 geocache setup 61 heading setup 63 map .
.
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www .garmin.com. © 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.
デバイスGarmin eTrex Venture Cx, Legend Cxの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Garmin eTrex Venture Cx, Legend Cxをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGarmin eTrex Venture Cx, Legend Cxの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Garmin eTrex Venture Cx, Legend Cxの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Garmin eTrex Venture Cx, Legend Cxで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Garmin eTrex Venture Cx, Legend Cxを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGarmin eTrex Venture Cx, Legend Cxの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Garmin eTrex Venture Cx, Legend Cxに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGarmin eTrex Venture Cx, Legend Cxデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
