GarminメーカーGPS Receiverの使用説明書/サービス説明書
ページ先へ移動 of 20
W AAS RAIM/FDE PREDICTION PROGRAM INSTRUCTIONS NO TE: T he WFDE Prediction Program is part of the Garmin T rainer and Route Planning software programs .
1 O VERVIEW The following sections pr ovide an overview of the WFDE Prediction Program and guidelines for when it should be used. Section 1.2 provides a comprehensive set of guidelines for when a WFDE prediction is requir ed that is applicable to any installation of a Garmin W AAS enabled unit.
1.2 DETERMINING WHEN A WFDE PREDICTION IS REQUIRED The WFDE Prediction Pr ogram determines whether the GPS constellation is r obust enough to provide a navigation solution for the specified route of flight.
* Approved refers to antennas listed in the applicable Installation Manual (T able 2) that allow the Garmin W AAS enabled unit with GPS software v3.XX or later to meet the TSO-C145a/C146a or TSO-C145c/C146c requirements without r equiring the operational limitations specified in the applicable Installation Manual.
2 IDENTIFYING GPS SOFTW ARE VERSION The GPS software version used in the Garmin W AAS enabled unit must be determined prior to performing the WFDE prediction.
GARMIN WAAS FDE PREDICTION PROGRAM INSTR UCTIONS 190-00643-01 Rev . E 6 WFDE PREDICTION PROGRAM INSTRUCTIONS 2.3 G1000 WITH GIA 63W Identifying GPS Software V ersion of a G1000 with a GIA 63W : 1) With the G1000 in normal mode , use the FMS Knob on the MFD to select the A UX - System Status P age (Figure 3).
3 RUNNING THE FDE PREDICTION PROGRAM T rainer and route planning software for W AAS-certified Garmin products include a WFDE Prediction Program to meet the FDE requir ements for GPS as a primary means of navigation for Oceanic/Remote operations (refer ence F AA AC 20-138A Appendix 1).
Figure 6 P ossible Update Messages 4) T he WFDE Prediction Program window appears (Figure 7) listing the flight plan waypoints , selected antenna, and the current date/time as the departure time . It is important to verify that the displayed route is correct before proceeding with the prediction.
190-00643-01 Rev . E GARMIN WAAS FDE PREDICTION PROGRAM INSTR UCTIONS 9 WFDE PREDICTION PROGRAM INSTRUCTIONS Garmin P art Number Applicable Product 006-A0154-01 G1000 with GIA 63W 006-A0154-02 GNS 480.
6) T o change the departure date , click the down arrow next to the “Date (UTC)” field. A calendar window appears . Click the left or right arrows to select a different month (if desired), then click the desired date . 7) T o change the departure time , click the hours , minutes , or seconds fields next to the “T ime (UTC)” field.
Figure 8 Flight Setup Window 9) T o deselect satellites from the setup window , click “De-select Satellites , ” then clear the box adjacent to any satellite that should not be used in the prediction (Figure 9).
Figure 10 Almanac W arning NO TE: T o ensure accuracy of results , the almanac data used for the RAIM and FDE predictions must be recent. If the information is out of date, the WFDE Prediction Program will automatically prompt the user to update the almanac data (F igure 10).
This Prediction is Based on the Displayed Estimated Arrival Time ±15 Min. Displays the Leg of Route Where Outage Occurs Figure 12 GPS/FDE A vailability Results Screen Displays the Maximum FDE Outage .
4 INTERPRETING THE FDE PREDICTION RESUL TS The GPS/FDE A vailability Results screen provides either a “GO” or “STOP” status for the GPS, RAIM, FDE, LNA V RAIM, and LNA V/VNA V & LPV minima availability . A yellow flag is a possible result for an FDE prediction for a non-Oceanic prediction (see Figure 12).
Suggestions to change the result of a failed flight plan prediction: 1) Alter the departure date and time . 2) Alter the route of flight. 3) V erify any deselected satellites . It is possible that some satellites unav ailable for a previous prediction are now available .
5 UPD A TING/CHANGING ALMANA C AND CONFIGURA TION FILES 5.1 ALMANAC, GEO ALMANA C, AND CONFIGURA TION FILES T o ensure that each is current, the Almanac, GEO Almanac, and Configuration Files are automatically checked each time the program is started.
5.2 CHANGING THE CONFIGURA TION FILE The WFDE Prediction Program may be used with several different Garmin software programs. Each program uses a specific configuration file to run the WFDE Prediction Program.
6 PRINTING 6.1 PRINTING THE PREDICTION RESUL TS Use of the “Print” selection on the “File” menu (in the upper left-hand cor ner) is not recommended, as the complete results of the prediction are not included on the printout. If a printout is desir ed, use the following steps.
190-00643-01_0E.indd 19 2/28/2011 1:24:37 PM.
© 2011 Garmin Corporation Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. T el. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin A T , Inc. 2345 T urner Rd., S.E., Salem, Oregon 97302, U.S.A. T el. 503/581.8101 or 800/525.
デバイスGarmin GPS Receiverの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Garmin GPS Receiverをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGarmin GPS Receiverの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Garmin GPS Receiverの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Garmin GPS Receiverで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Garmin GPS Receiverを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGarmin GPS Receiverの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Garmin GPS Receiverに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGarmin GPS Receiverデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
