GarminメーカーGPSMAP 235の使用説明書/サービス説明書
ページ先へ移動 of 119
GPSMAP 235 Sounder TM O WNER’S MANU AL AND REFERENCE 19000138.10A.QXD 11/11/99 8:46 AM Page 1.
Software Version 4.01 or above Internal Database Version 3.00 © GARMIN Corporation G-chart TM cartridge data is copyrighted by Navionics Corporation and GARMIN Corporation and may not be copied or used for any other purpose without permission. © 1999 GARMIN Corporation GARMIN International, Inc.
i INTRODUC TION W arning GARMIN, GPSMAP, G-chart, AutoLocate, TracBack and PhaseTrac12 are trademarks of GARMIN Corporation and may only be used with permission.
The GPS system is operated by the United States government, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment.
iii INTRODUC TION Sounder Capabilities Designed for detailed electronic charting and complete depth sounding capabil- ity , the GARMIN GPSMAP 235 Sounder is a powerful navigation device that also gives you the fishfinding information you need in fresh or saltwater .
iv INTRODUC TION Warranty Limit ed W arr anty GARMIN warrants this product to be free from defects in materials and manu- facture for one year from the date of purchase. GARMIN will, at its sole option, repair or replace any components which fail in normal use.
v INTRODUC TION Preface Congratulations on choosing one of the most advanced depth sounding and marine navigation systems available. The GARMIN GPSMAP 235 Sounder com- bines the proven performance of .
INTRODUC TION Packing List vi Before installing and using with your sounder , please check to see that your package includes the following items. If any parts are missing, please contact your GARMIN dealer immediately .
vii GETTING S T AR TED Table of Contents Warning ..................................................................................................................i Cautions .............................................................................
viii INTRODUC TION Keypad Usage The GPSMAP 235 Sounder’s advanced keypad system is designed to allow for fast, con- venient selection of navigation options and data entry. The getting started tour will introduce you to the keypad and provide a ‘hands-on’ lesson in using the sounder.
1 GETTING S T AR TED Initialization Initializing the Receiver Before you use your GPSMAP 235 for the first time, you’ll need to “initialize the receiver .” Initialization is the process in which the r eceiver collects satellite data and establishes its (your) present position.
AB Initializing the Receiver (con’t.) The Map Page will appear , prompting you to select your appr oximate present posi- tion with the map cursor . 1. Use the R keypad to move the map cursor to a location close to your present position. If you have difficulty identifying your exact position, use the I key to zoom to a lower map scale.
A B Getting Started T our The GARMIN GPSMAP 235 Sounder is a powerful electronic navigation and depth sounding system that provides detailed chart coverage and convenient con- trol of many advanced featur es right from the screen display .
A B Status Page The Status Page provides a visual r eference of satellite acquisition and receiver status, with a signal strength bar graph and a satellite sky view in the center of the page. Each page of the sounder features an options menu, which gives you access to other functions and features that relate to the specific page you ar e viewing.
5 GETTING S T AR TED Page Sequence/Position Page The satellite Status Page is one of five main pages used in the sounder . All five pages are linked together in a simple chain, which allows you to scr oll through the pages in either direction using the J and Q keys.
6 GETTING S T AR TED Using the GOTO Key AB Marking a Position To mark your present position: 1. Press the M key. The mark position page will appear, with a default three-digit waypoint name, symbol, position, and depth. 2. Use the R keypad to highlight the waypoint name field (001) and press T .
Sounder Page The Sounder Page lets you use the GPSMAP 235 as a fishfinder . The top of the screen contains any of seven selectable data field options, while the middle of the page contains a right-to-left moving sonar image of the water beneath your boat.
Range Modes The unit uses three range modes on the Sounder Page: auto, manual, and win- dow . Auto mode displays the most information possible while continuously showing the bottom. Manual mode lets you select the displayed depth. Window mode allows you to define a starting depth and length of the range window ,.
Zoom Feature The zoom feature allows you to view a smaller portion of the complete range in greater detail. The zoom feature operates in auto or manual mode. Auto zoom will follow the bottom contour while manual zoom will display the selected depth. For more on the zoom feature, see pages 26-27.
Map Page The Map Page combines digital chartplotting with a user -selectable display of navigation data, and a built-in worldwide database. It will also be the page you use most to create and edit waypoints and r outes. Before we take off on a practice r oute, let’ s take a brief look at its various features and displays.
Using the Map Cursor The cursor is an important tool that can be used to pan to other map locations, mark and edit waypoints and routes, and r eview position data of on-screen navaids and waypoints. T o get a feel for using the Map Page and cursor , try the following exercise: 1.
Going to a Destination GPS is all about marking positions as waypoints and navigating to them using the receiver’ s steering guidance and map displays. W e’ve already seen how to use the M key to store our present position, so it’ s time to move on to the fun part— going to a destination.
Going to a Destination (con’t.) A data field at the top of the page will now display the bearing and distance to the second route waypoint. T o get started, let’ s enter a speed for our vessel, which we can do from the ‘Setup Simulator?’ listing on the map options menu.
Going to a Destination (con’t.) Now that we’ve zoomed in a little closer to our route, we can pan ahead of our vessel with the cursor to review and create on-scr een waypoints and navaids. T ry moving the cursor to select the ‘TOUR3’ waypoint— just use the R keypad to move the cursor as close as possible to the waypoint.
15 GETTING S T AR TED Overview Navigation Page The Navigation Page provides graphic steering guidance to your destination. The bearing (BRG) and distance (DIS) to the destination, with your current course (COG) and speed over ground (SOG) , are displayed at the top of the page, along with a compass tape to indicate your cardinal heading.
16 Navigation Page (con’t.) To adjust the simulated boat speed: 1. Press the UP arrow of the R keypad to increase the speed in 5 knot/kph/mph incre- ments. Press the DOWN arrow to decrease the speed in the same increments. To steer the boat: 1. Press the LEFT or RIGHT arrows of the R keypad.
Active Route Page The active route page shows each waypoint of the active r oute in sequence, with the waypoint name, distance and estimated time enroute to each waypoint displayed. As you navigate the route, the active r oute list will be automatically updated, indicating the next destination waypoint.
Main Menu Page The main menu page’ s eleven submenus are divided into categories by function. Y ou can select a particular submenu by simply highlighting the desired option and pressing T . T o get a feel for how the main menu page works, let’ s clear out the track log we’ve created during our simulated tour .
Status Page The Status Page provides a visual r eference of various receiver functions, including current satellite coverage, receiver operating mode and curr ent receiver accuracy . The status information will give you an idea of what the receiver is doing at any given moment.
AB Receiver Status, EPE and DOP Receiver status is displayed at the top of the page, with the current estimated position error (EPE) and dilution of precision (DOP) to the left of the sky view . DOP is an indication of satellite geometry quality measured on a scale of one to ten (lowest numbers the best, highest numbers the poorest).
Satellite Status Page Options The satellite Status Page features an options menu that pr ovides access to func- tions and features relating to the Status Page. To display the Status Page options menu: 1. From the Status Page, press O . There are four options: • Initialize Position?: Allows you to initialize the receiver graphically or by text.
Position Page The position page shows your position, direction, and speed. There is a graphic compass tape at the top of the page that shows the direction you’re heading (you have to be moving), and four selectable data fields: course over ground (COG), speed over ground (SOG), distance traveled (TRP) and altitude (AL T).
Position Page Options The position page features an options menu that pr ovides access to functions and features relating to the position page. To display the position page options menu: 1. Press O . There are four options: • Reset Trip Distance?: Resets the trip odometer (TRP) field to zero.
A. The right side of the screen represents the trans- ducer’s location on your boat. Items appearing on the right side of the screen were passed by more recently than those on the left. B. The four-level gray LCD screen makes it possible to easily separate sonar targets from their surroundings.
Range Modes The sounder features three depth range modes: auto, manual, and window . Auto is the default setting and continually adjusts the screen display to show the maximum amount of detail possibl.
Zoom Feature The zoom feature allows you to view a smaller portion of the complete range in greater detail. The zoom feature operates in auto or manual mode. Auto zoom will follow the bottom contour while manual zoom will display the selected depth. For more on the zoom feature, see pages 26-27.
Zoom Window Depth Scale Once a zoom window is displayed, it’ s depth scale can be adjusted. A hollow indicator bar is displayed to the left of the depth scale on the original picture (top half of the screen). The depth scale of the zoom window corresponds to the range set by the indicator bar .
Map/Sounder Page Split Screen The sounder can display a split screen view of the sounder window and Map Page. The split screen feature is turned on fr om the Map Page . To view the split screen: 1. Press J until the Map Page appears. 2. Press O to display the Map Page options menu.
Sounder Page Options The Sounder Page options menu lets you customize the sounder’ s features to suit your needs. To display the Sounder Page options menu: 1. From the Sounder Page, press O . The following options are available: • Sensitivity Adjust?: Sensitivity controls the sounder’s ability to show echoes without introducing interference.
Sounder Page Options (con’t.) • Whiteline Adjust: Whiteline indicates the relative hardness or softness of the bottom. The bottom itself is shown as a continuous black line, while the whiteline shows up as a light gray band just below. The whiteline becomes thicker or thinner depending on bottom hardness.
Sounder Page Options (con’t.) Auto is the default setting and continually adjusts the screen display to show the maximum amount of detail possible, while always showing the bottom. Manual allows you to adjust the sonar display’ s depth using the R keypad.
Sounder Page Options (con’t.) • Change Data Fields?: Allows you to specify the data displayed in each data field on the Sounder Page. There are thirteen options: • BRG: Bearing to active wpt •.
Sounder Setup Page The next Sounder Page menu option is ‘Sounder Setup?’ which accesses the sounder setup page. There are eight fields on the sounder setup page which allow you to customize the sounder’ s features: Fish ID, T arget Depth, W ater T emperature, W ater T ype, Noise Rejection, Keel Of fset, Frequency , and Speed Calibration.
Sounder Setup Page (con’t.) To select Fish ID: 1. Highlight the ‘FISH ID’ option and press T . The ‘FISH ID’ submenu will appear. 2. Highlight the desired setting and press T . • Target Depth: Displays the digital depth of each fish symbol.
Sounder Setup Page (con’t.) • Noise Rejection: Removes cross talk from other sounders or ignition noise from poor boat motor installations (non-shielded plugs, etc.). There are three options: • Off: The unit will not remove anything it thinks is cross talk noise.
Sounder Setup Page (con’t.) There are four options: • 200 kHz: Best suited for shallow, inland waters where deep water performance is not critical and bottom detail and resolution is the highest priority.
37 GETTING S T AR T- ED Using the GOTO Key Sounder Setup Page (con’t.) To use Auto Calibration: 1. Ensure ‘Auto Calibrate?’ is displayed in the speed calibration field. If it is not, press O to display the calibration menu. 2. Highlight ‘Auto Calibrate’ and press T .
38 GETTING S T AR T- ED Using the GOTO Key Sounder Setup Page (con’t.) To use manual calibration: 1. Ensure manual calibration mode is selected in the speed calibration field. If not, press O , highlight ‘Manual Calibrate?’, and press O . 2. Press T .
39 GETTING S T AR T- ED Using the GOTO Key Map Page The Map Page pr ovides a comprehensive display of electronic cartography , plotting and navigational data. The map display shows your boat on a digital chart, complete with geographic names, navaids, depth contours and other chart features.
40 GETTING S T AR T- ED Using the GOTO Key Map Modes There are two map operating modes: the position mode and the cursor mode. When the map is in the position mode, the position marker pans the cartography to keep itself within the display area.
41 GETTING S T AR T- ED Using the GOTO Key Using the Cursor The cursor allows you to pan away from your pr esent position and scroll to other map areas (even outside of your current G-chart coverage). As you pan past the edge of the current map display , the screen will actively scr oll forward to pr o- vide continuous map coverage.
42 GETTING S T AR T- ED Using the GOTO Key Selecting Map Scales The map display has 16 available range scales from 1/8th to 4096 nautical miles (1/4 to 7500 kilometers). The map scale is controlled by the I and H keys, with the current scale displayed at the bottom of the data window .
43 GETTING S T AR T- ED Using the GOTO Key Map Page Options The Map Page options menu provides access to many of the featur es and func- tions that will help you configure the Map Page to your own prefer ences. To display the Map Page options menu: 1.
44 GETTING S T AR T- ED Using the GOTO Key Map Page Options (con’t.) • Configure the Map?: Allows you to determine what map items are displayed on a particular map scale which will help prevent excessive clutter. The map configura- tion page shows a list of twelve map items with corresponding zoom scale selection boxes.
45 GETTING S T AR T- ED Using the GOTO Key Map Page Options (con’t.) From the map configuration page, you can also access another options menu by highlighting any of the items and pressing O . There are five options: •Enable or Disable a Row?: Allows you to turn an entire row on or off.
46 GETTING S T AR T- ED Using the GOTO Key Map Page Options (con’t.) •Set Map Colors?: The next option available from the map configuration page is the set map colors option, which allows you to define the fill color (grayscale) of the land and water used on the map display.
47 Map Page Options (con’t.) The last two display options make it possible to display both the Map Page and Sounder Page simultaneously in a split screen arrangement. The top half of the page will show a reduced-size Map Page while the Sounder Page is displayed in the lower half of the screen.
48 GETTING S T AR T- ED Using the GOTO Key Map Page Options (con’t.) •Change Data Fields?: Allows you to specify the type of data that is displayed in each data field on the map display.
49 GETTING S T AR T- ED Using the GOTO Key Navigation Page Whenever a GOTO, MOB, T racBack or route has been turned on, the sounder will provide digital and graphic steering guidance to the destination with the Navigation Page.
50 As you head toward your destination, the highway perspective will move to indicate your progr ess to the waypoint and which direction you should steer to stay on course. If you are navigating a r oute, the Navigation Page will show each route waypoint in sequence, with the active leg indicated by the white portion of the highway .
51 GETTING S T AR T- ED Using the GOTO Key Navigation Page Options (con’t.) The following options are available: • Change Data Fields?: Allows you to define the type of data that is displayed in any of the six user-selectable data fields.
52 GETTING S T AR T- ED Using the GOTO Key Main Menu Page The main menu page provides access to various waypoint, system, navigation and interface management and setup menus. To access the main menu page from any page in the sounder: 1. Press O twice.
53 GETTING S T AR T- ED Using the GOTO Key Creating and Using W aypoints The sounder stores up to 250 alphanumeric waypoints with user -defined sym- bols and comments available for each waypoint.
54 GETTING S T AR T- ED Using the GOTO Key Mark Key (con’t.) The mark key can also be used on the Map Page to mark the cursor position or an on-screen navaid. T o mark a navaid, select it with the cursor . The sounder will use the navaid text shown on the cartography as the default comment.
55 GETTING S T AR T- ED Using the GOTO Key Creating W aypoints Graphically W aypoints may also be quickly created fr om the map display , which allows you to ‘point and shoot’ at any map position and create a new waypoint. To create a new waypoint graphically: 1.
56 GETTING S T AR T- ED Using the GOTO Key Reference W aypoints A new waypoint can also be created by entering an existing waypoint’ s range and bearing or the range and bearing from your pr esent position. The sounder will then calculate the position coordinates for you, using the r eference selected.
57 GETTING S T AR T- ED Using the GOTO Key Reviewing and Editing W aypoints Once you have created and stored a waypoint, it may be modified, r eviewed, renamed or deleted at any time using the waypoint definition page.
58 GETTING S T AR T- ED Using the GOTO Key W aypoint Definition Page Options The waypoint definition page also features an options menu that allows you to edit the selected waypoint on the map display , rename the selected waypoint or delete the waypoint from memory .
59 GETTING S T AR T- ED Using the GOTO Key W aypoint Submenus The sounder’ s main menu page features four waypoint submenus that let you manage a large number of waypoints quickly and ef ficiently .
60 GETTING S T AR T- ED Using the GOTO Key Proximity W aypoints The proximity waypoints list lets you define an alarm cir cle around a stored waypoint position, and can be used to help you avoid reefs, r ocks or restricted waters. Up to nine waypoints may be listed, with a maximum alarm radius of 99.
61 GETTING S T AR T- ED Using the GOTO Key Create W aypoint Submenu The third waypoint submenu accessible fr om the main menu page is the ‘Create W aypoint’ submenu, which allows you to create a new waypoint by manually entering coordinates. Instructions for using the ‘Cr eate W aypoint’ submenu are provided on page 55.
62 GETTING S T AR T- ED Using the GOTO Key Navigation Methods The sounder provides four methods of navigation: GOTO, MOB, T racBack and Route . GOTO The sounder allows you to create a simple r oute consisting of your current posi- tion and selection of a single destination (waypoint) from the waypoint list.
63 GETTING S T AR T- ED Using the GOTO Key GOTO Options The GOTO options menu provides a list of additional GOTO options that let you start a T racBack route, select a destination waypoint fr om the nearest way- points list, select a route to navigate, or cancel the curr ent GOTO destination.
64 GETTING S T AR T- ED Using the GOTO Key MOB The man overboard feature (MOB) is used in emergency situations, such as man overboard, or to quickly mark a spot. To turn on the MOB feature: 1. Press the B key. 2. Press the T key to confirm and begin navigating to the MOB position.
65 T racBack Navigation (con’t.) Once a T racBack has been turned on, the sounder will take the track log cur- rently stored in memory and divide it into segments called ‘legs’.
66 Routes The last way to navigate to a destination is to create a user -defined route. The sounder lets you create and store up to 20 r eversible routes (numbered 1-20), with up to 30 waypoints each.
67 Routes (con’t.) Once a route has been cr eated graphically (and the Q key has been pressed to finish), the map display will automatically enter the route r eview mode. The arrow pointer will be replaced by the map cursor , located at the last route waypoint.
68 GETTING S T AR T- ED Using the GOTO Key Routes (con’t.) The route edit mode also allows you to insert a new r oute waypoint in any route leg using the map cursor .
69 GETTING S T AR T- ED Using the GOTO Key Routes (con’t.) To review the selected waypoint: 1. Highlight the ‘Review?’ option and press T . To insert a new waypoint before the selected route waypoint: 1. Highlight the ‘Insert?’ option and press T .
70 GETTING S T AR T- ED Using the GOTO Key Route List Page The route list page numerically lists all the routes currently stor ed in memor y , with the route number and comment displayed.
71 GETTING S T AR T- ED Using the GOTO Key Route List Page Options (cont.) • Clear Route: Allows you to clear all waypoints from the selected route. To clear the selected route: 1. Highlight the ‘Clear Route?’ option and press T . 2. Press T to confirm the clear route warning.
72 GETTING S T AR T- ED Using the GOTO Key Active Route Page Whenever you have activated a route, the active route page will appear in the main page sequence. The active route page shows each waypoint of the active route, with the waypoint name, desir ed track, cumulative distance and ETE or ET A for each waypoint from your present position.
73 GETTING S T AR T- ED Using the GOTO Key Active Route Page Options The following options are available fr om the active route page: • Invert Route?: Activates the active route in reverse order and begins navigation.
74 GETTING S T AR T- ED Using the GOTO Key T rack Log Submenu The track log submenu lets you specify whether to recor d a track plot (an elec- tronic r ecording of your path), and define how it is recor ded. It also provides an indicator of the amount of track memory used and selects functions to clear the track memory and start a T racBack route.
75 GETTING S T AR T- ED Using the GOTO Key T rip and Fuel Planning The trip and fuel planning submenu lets you plan and r eview distance, fuel, and ETE/ET A information between any two waypoints, your present position and a stored waypoint, or any part of a stored r oute.
76 GETTING S T AR T- ED Using the GOTO Key T rip and Fuel Planning (con’t.) To use the route planning mode: 1. Highlight the ‘Trip & Fuel Planning’ option from the main menu and press T . 2. If the plan field is not set to ‘Route’, press O and select it from the options page.
77 GETTING S T AR T- ED Using the GOTO Key T rip and Fuel Planning (cont.) To use the sunrise/sunset planner: 1. Highlight ‘Trip & Fuel Planning’ option from the main menu and press T .
78 GETTING S T AR T- ED Using the GOTO Key Setup Submenus (con’t.) • Time Offset: Provides a data entry field to enter the time difference between UTC time and local time (see page 105 for a list of time offsets). When entering a time offset, be sure to select a positive or negative offset.
79 GETTING S T AR T- ED Using the GOTO Key Navigation Setup The navigation setup submenu is used to select a variety of navigation informa- tion including: position format, units of measure, and heading refer ences. This submenu is also used to select map datums, set the CDI scale and adjust the built- in velocity filter .
80 Navigation Setup (con’t.) • CDI Scale: Provides a list of six CDI scale settings for the Map Page CDI: +/-0.10, 0.50, 1.0 (default), 5.0, 10.0 and 25.0 miles or kilometers. The scale represents the distance from the center of the scale to either end of the scale.
81 GETTING S T AR T- ED Using the GOTO Key Timers and Alarms Setup The timer and alarms submenu is used to control various alarm/timer settings. • Timer: Sounds an alarm when an entered interval (up to 99:59:59) has expired, or provides a continuous running clock timer to 99:59:59.
82 Input/Output Submenu The Input/Output submenu lets you control interface settings for connecting external NMEA devices, a DGPS receiver or a personal computer .
83 GETTING S T AR T- ED Using the GOTO Key Using NMEA and DGPS Interface Settings If you are using an NMEA interface format, the NMEA format must be specified in the NMEA format field that will automatically appear when an NMEA option is selected. The appropriate baud rate will be set automatically .
84 Installing and Removing G-Chart Cartridges The unit uses G-chart offshor e or inland cartography to display digital charts on-screen. G-chart cartridges are installed in the car d slot located at the bottom right of the unit. G-chart cartridges may be installed or removed at any time, whether the unit is on or off.
85 Using G-Chart Cartography Once a G-chart cartridge has been inserted, the map coverage outlines for the cartridge will automatically appear on-screen. Keep in mind that the display will not automatically scroll to the map ar ea or zoom to a level where you can see the coverage outlines.
LORAN C Basics LORAN C is a radio navigation aid operated and maintained in the United States by the Untied States Coast Guard. The name LORAN is an acr onym for "Long Range Navigation". The LORAN system covers the entire United States and the U.
LORAN TD Feature The LORAN TD feature eases the transition fr om using LORAN to using GPS. The GPSMAP 235 Sounder automatically converts GPS coordinates to LORAN TDs for those who have a collection of LORAN fixes for favorite fishing spots and other- waypoints recor ded as TDs.
It is impor tant to set the correct GRI-chain and secondary stations for the way- point that you want to create. The GRI-chain and Secondary station fields cannot be edited on the Create W aypoint page. The first setting on the LORAN Setup page is the LORAN Chain Number (GRI chain).
Creating W aypoints in the LORAN TD Format W aypoints can be created graphically , using the Mark Key , and by T ext Entry (see page 53). W aypoints can also be created using LORAN TDs.
90 Sounder Installation The GPSMAP 235 Sounder must be properly installed according to the follow- ing instructions to get the best possible performance. The GPSMAP 235 Sounder is available both with and without a transducer and cable (the cable must be used for FCC compliance).
91 Mounting the Sounder The unit’ s waterpr oof case is suitable for mounting in exposed locations or at the nav station. The unit comes with a gimbal bracket that can be used for surface or overhead mounting. When choosing a location for the unit, make sure you consider the following conditions: • There should be at least a 3” (7.
92 To flush mount the sounder: 1. Remove the four M5 screws from the back of the unit and remove the mounting bracket. 2. Using the mounting template provided in the box, determine where you wnat to mount the unit and tape the template in place. 3. Using a hammer and center punch, mark the centers of the relief hole and mounting screw holes.
93 SEC TION A APPENDIX Installation Figur e 1-F or thick mounting sur- faces, insert the M5 scr ews dir ectly thr ough the four drilled holes. Figur e 2-For thin panels, place the mounting bracket on the back side of the panel for additional support. 19000138.
Garmin offers a variety of transducers for use with your Sounder. Detailed installation instructions for the transducer you have selected are included with the transducer. Proper placement and installation of the transducer are essential in the operation of the sounder portion of the unit.
95 Connecting the Power/Data Cable The power/data cable connects the GPSMAP 235 to a 10-40 volt DC system and provides interface capabilities for connecting external devices, including an external alarm. The color code in the diagram below indicates the appropriate harness connections.
96 SEC TION B APPENDIX Wiring and Specifications DGPS corrections are accepted in RTCM-104 v. 2.0 format through the NMEA In (BROWN) har- ness lead. The GARMIN GBR 21 is the recom- mended beacon receiver for use with the GPSMAP 235 system.
97 PHYSICAL Case: Gasketed Construction Size: 7.5”H x 7.7”W 2.6”D (19.2 x 19.74 x 6.7cm) Weight: Less than 2 lb. Temperature Range: -4º to +158ºF (-20º to 70ºC) PERFORMANCE (GPSMAP 235 Sounder) Receiver: 12 parallel channel Acquisition Time: Approx.
98 Alarm Clock— The alarm clock has sounded. Anchor Drag Alarm— You have drifted out of the specified distance range. Approaching— You are less than one minute away from reaching a destination waypoint at your present speed over ground. Arrival At— You have arrived at the destination waypoint.
99 Proximity Alarm— You have entered the alarm radius for the proximity waypoint indicated. Proximity List Full— You have used all nine proximity waypoints. Proximity Overlaps Another Prox Wypt— The alarm radius specified overlaps the area specified for another proximity waypoint.
100 Adindan Adindan- Ethiopia, Mali, Senegal, Sudan Afgooye Afgooye- Somalia AIN EL ABD ‘70 AIN EL ANBD 1970- Bahrain Island, Saudi Arabia Anna 1 Ast ‘65 Anna 1 Astro ‘65- Cocos I.
101 Corrego Alegr Corrego Alegre- Brazil Djakarta Djakarta (Batavia)- Sumatra Island (Indonesia) Dos 1968 Dos 1968- Gizo Island (New Georgia Islands) Easter Isld 67 Easter Island 1967 European 1950 Eu.
102 NAD27 Greenland North American 1927- Greenland (Hayes Peninsula) NAD27 Mexico N. American 1927- Mexico NAD27 San Salvadr North American 1927- San Salvador Island NAD83 North American 1983- Alaska,.
103 Almanac Data : The satellite constellation information (including location and health of satellites) that is transmitted to your receiver from every GPS satellite. Almanac data must be acquired before GPS navigation can begin. Bearing (BRG) : The compass direction from your position to a destination.
104 Thermocline — A layer of water separating warmer water above from cooler water below. Turn (TRN) — The difference and direction in degrees between the bearing to your destination and your course over ground. The TRN value is used to indicate what direction, and how many degrees, to turn to get back on course.
105 The chart below gives an approximate UTC time of fset for the various longitu- dinal zones. Check with local charts for more detailed information. If you are in daylight savings time, add one hour to the offset. Longitudinal Zone Offset W180.0º to W172.
2D Navigation . . . . . . . . . . . . . . . . . . . . . . . . .20 3D Navigation . . . . . . . . . . . . . . . . . . . . . . . . .20 A ccessories . . . . . . . . . . . . . . . . . . . . . . . . . . .vi Acquiring Satellites . . . . . . . . . . . . . . .
Map Modes . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Map Orientation . . . . . . . . . . . . . . . . . . . . . . .44 Map Page . . . . . . . . . . . . . . . . . . . . . . . . .10, 39 Center On First Wpt . . . . . . . . . . . . . . . . .69 Center On Vessel .
SEC TION G APPENDIX Index 108 Simulated Boat Speed . . . . . . . . . . . . . . . . . . .12 Simulated Boat Steering . . . . . . . . . . . . . . . . .16 Simulating Navigation . . . . . . . . . . . . . . . . . . .20 Simulator Mode . . . . . . . . . . . .
© 1999 GARMIN Corporation www .garmin.com GARMIN International, Inc.,1200 E. 151st Street, Olathe, KS 66062 USA GARMIN (Europe) Ltd., Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey SO51 9AQ UK GARMIN (Asia) Corp., 3F ,. No. 1, Lane 45, Pao Hsing Road, Hsin T ien, T aipei, T aiwan R.
デバイスGarmin GPSMAP 235の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Garmin GPSMAP 235をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGarmin GPSMAP 235の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Garmin GPSMAP 235の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Garmin GPSMAP 235で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Garmin GPSMAP 235を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGarmin GPSMAP 235の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Garmin GPSMAP 235に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGarmin GPSMAP 235デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。