GEメーカー45608の使用説明書/サービス説明書
ページ先へ移動 of 54
Home Theat er Remote with Z-Wave ® Lighting Contr ol 45608 www .easyzw ave.com Manage your home enter tainment system and lighting with one remote! Controls 12 Audio/Video Devices and up to 232 Z-Wav.
2 Table of Contents Audio/Video Key Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Automatic Time-Out .
3 Introduction Thank you for purchasing the GE model 45608 R emote Control. This remote allows you to contr ol up to 12 Audio/Video devices as well as your Z-Wave Home Lighting Contr ol network. A Z-Wave home control network can include up to 232 Z-Wav e enabled devices.
4 Audio/Video Key Chart A . SE T – Press & hold to enter setup mode. When in setup mode, press & r elease to back up one level in the setup menu or press & hold to cancel setup. B. ARROWS – Scroll left or right to highlight desired menu item.
5 A B C D E F G H I J K L M N O P Q R.
6 Batteries Four “ AAA ” Alkaline batteries (not included) are requir ed. Battery Use and Safety • Use only fres h bat ter ies of the required size an d reco mme nd ed t yp e. • Do not mix old and new b at terie s or dif feren t t ypes of ba t teries .
7 4. W hen in setup mod e: • Press and rele ase t he SET key to back up o ne leve l in the me nu. • Press and hol d the SE T key to exit setup mod e. Initial Setup (Audio/Video Devices) Note: Most devices can be added by entering its code or searching for its code as described in the following two sections.
8 NO TE: If an invalid code is entered, the LED emits one long blink , and the L CD displays INV ALID. 5. The se lec ted de vice turns of f i f the cod e was success ful . Y ou can also tr y pressing a ddit ion al keys on th e remote to test other functions .
9 Changing a Device Code NO TE: All settings of the current device (Key Mover , Learning, and all other user-pr ogrammed features) will be retained. 1. From INITIAL SETUP press OK . T he remote displ ays ADD DEVICE . Use t he ARROW keys to scrol l to CHANGE DEVICE CODE .
10 4. Use the ARROW keys to view co des of other d evices you h ave set up. 5. Af ter viewin g the cod es, pres s OK or SET to exit . Replacing a Device This replaces an existing device with a new device in your r emote’s programming. One example could be r eplacing your cable box with a satellite receiver .
11 Set Clock (Day and Time Setup) 1. From ADVANCED FUNCTIO NS , highlight SET CLOC K and Press OK . 2. T he screen w ill displ ay the da y , hour , minu te and AM/PM with the day hi ghlighted. a. Press the C H + or CH - key to chang e the d ay . b. Use t he r ight ARROW key to highlight the hour , minute and AM/PM and use the CH keys to ad jus t .
12 4. T he remote display s LOC K VO LUM E . Pres s OK . 5. T he remote displ ays USE < > TO SE LEC T VOLUME S OURCE THEN PRE SS O K . 6. Use the ARROW keys to se lec t t he device to b e locke d. Th e remote display s the name of t he device and i t s code (for example, L O CK VOL UME TO RE CEIVER 1158 ).
13 Key Mover Key Mover allows you to copy k eys around the remote contr ol, within a device, or from one device to another . Copying a Key 1. From ADVANCED FUNCTIO NS , use t he ARROW keys to s croll to KEY MOVER . Pres s OK . 2. T he remote displ ays ADD KE Y MOVER .
14 5. T he remote displ ays DELE TING ALL PUS H OK TO CONFIR M . Press OK . 6. T he remote display s ALL MOVED KE YS DE LE TED PUS H OK TO DELETE MORE . Press OK to del ete keys for a di f ferent device o r SET to exi t. Deleting a Single Copied Key 1.
15 Adding a Key Macro: 1. From ADVANCED FUNCTIO NS , use t he ARROW keys to s croll to KEY MACRO . Press OK . 2. T he remote displ ays ADD KE Y MACRO . Press OK . 3. T he remote displ ays SEL EC T MACRO KEY . Se lec t any key but Set, Z -Wave, OK or Ar row s (scroll l ef t & scro ll right ) to s tore your m acro.
16 3. T he remote displ ays SEL EC T MACRO KEY TO DELE T E AND PUSH OK . 4. O nce you ha ve press ed a valid ma cro key , th e remote display s MACRO DELE TE D CHOOS E ANOTHER OR O K TO EX IT . 5. Repea t ste ps 2 –4 ab ove until yo u have f ini shed del eting key macros .
17 5. T he remote displ ays SEL EC T THE KE Y TO LE ARN TO . All keys except SET , Z- W a ve , OK , or Arrows (scroll l ef t & scro ll right ) are available for lear ning. Pres s the key you want to te ach the comm an d to. 6. T he remote display s WHEN BACKL IGHT T URNS OFF PUS H TEACHING KEY .
18 Deleting a Single Learned Key T o delete a single learned key, follow steps 1–3 above. Then perform the following steps: 1. Press t he key containing the l earne d func tio n to be del eted. T he remo te displays KEY DELE T ED PUSH OK TO DELE T E ANOTHER .
19 Resetting the Remote Resetting All Audio/Video Featur es Y ou can reset all the remote’s pr ogramming, including Key Mover , Key Macro , Learning, and Volume Lock, except for device codes. T o reset all programming, perform the following steps: 1.
20 Z-Wave Ov er view Please note: The terms “Device” , “Node” and “Light” all refer to an individual Z-Wave enabled device in your home control network and are interchangeable within the context of these instructions. If this remote is used as the primary contr oller , you must use it to create your contr ol network.
21 Z-Wave T erminology Primary Controller : This is the main device used to set up and control your Z-Wav e network. There can only be one primary controller and it must be used to add or delete devices.
22 Wireless Range This device complies with the Z-Wave standard of open-air , line of sight transmission distances of 65 feet . Actual performance in a home depends on the number of walls between the r emote controller and the destination device, the type of construction and the number of Z-Wave enabled devices installed in the control network.
23 Notes on Network Management 1. “ Ad d a node, group or s cene” can also be referred to a s “include a node, group or s cene. ” “Remove a no de, group or scene” can also be referred to a s “E xclude a nod e, group or scene.
24 Z-Wave K ey Chart A . SE T – Press & hold to enter setup mode. When in setup mode, press & r elease to back up one level in the setup menu or press & hold to cancel setup. B. SHIFT – For use in Z-Wave setup & operation modes. Press & release to shift number key fr om devices 1 – 9 to 10 – 18.
25 A B C D E F G H I J K L M N.
26 Z-Wave Setup Devices / Lights / Nodes Adding a Device (Node / Light) to the Network In order to contr ol the lights, they must be Z-Wave enabled and you must first add them to your home netw ork .
27 2. Ad d device s to your home net wor k (maximum of 23 2) wit hout assignin g them to a sp ecif ic numbe r key . T hese de vices can only be co ntroll ed th rough t he GROUP , SCENE or ALL comm an ds . Add a device without assigning it to a specific number key 1.
28 Turning a Light On or Off • T o turn a light o n, press an d releas e the CH + key for les s than one se cond. T he screen will d isplay ON ab ove the se lec ted Light/Node. • T o turn a light of f, press and rele ase t he CH - key for less t han one se cond.
29 6. W hen the s creen displ ays SUCCESSF UL , the d evice ha s been delete d from your net wor k and reset to i t s fac tor y defaul t s. Groups Y ou can create a collection of devices (lights / nodes) that you can turn On or Off as a group. Y ou can create up to a maximum of 18 groups.
30 • T o turn a GROUP of f, press and relea se the CH - key for le ss than on e second . The s creen will dis play OFF above t he selected GROUP . Removing a Device (Node / Light) From a Gr oup: This only removes the device fr om a specific group.
31 Scenes can include lights from differ ent groups. Adding a Device (Node / Light) to a Scene 1. Enter Z -Wave setup mode and hi ghlight SCENE SETUP 2. P res s OK ; t he screen wi ll displa y ADD 3. P re ss OK ; the screen w ill displ ay SEL DI GIT 4.
32 • T o turn a SCENE of f, press and relea se th e CH - key for less than on e second . The s creen will dis play OFF above t he selected SCENE . Removing a Device (Node / Light) From a Scene This only removes the device fr om a specific scene.
33 1. Enter Z -Wave setup mode and hi ghlight LIGHT SETUP , GROUP SETUP or SCENE SETUP . Pres s OK . 2. Use t he ARROW ke ys to scro ll to LAB EL . 3. P re ss OK ; the screen w ill displ ay SEL DI GIT 4. Pres s a digi t ( 1 -9) for the LIGHT , GROUP or SCENE you would like to label.
34 Adding or Excluding a Device T o / From All Control Menu options under ALL SETUP include E XCLUDE ALL ON OFF , INCLUDE ALL ON OFF , E XCL UDE ALL ON ONL Y and E XCLUDE ALL OFF ONL Y . 1. Enter Z -Wave setup mode and hi ghlight ALL SE TUP . 2. P res s OK ; t he screen wi ll displa y EXCLUDE ALL/ON OFF 3.
35 e. SUNDA Y (The event w ill only occur on Sund ays) f. MONDA Y ( The event will o nly occur on Mond ays) g. TUESDA Y (T he event will on ly occur on T ues day s) h. WEDNESDA Y (T he event will only o ccur on Wednesda ys) i. THURSDA Y (The e vent will only occur on T hursd ays) j.
36 14 . T o set t he OFF TIME of your event; a. Use t he ri ght or lef t ARROW keys to scroll r ight or l ef t . b. Press th e CH + key to move hour , minu te, AM or PM for ward s. c. Pres s the CH - key to move the hour , minute, AM or PM backwa rds.
37 Adding a Thermostat: 1. Enter Z -Wave setup mode and hi ghlight T H E R M O S TAT 2. P res s OK and t he screen will d isplay ADD 3. P re ss OK and t he screen wi ll displ ay SETUP WAITING 4. Pres s the b ut ton on t he th ermos tat ’ s Z -Wave inter face 5.
38 T o Change Advanced Configuration Settings: 1. Enter Z -Wave setup mode and hi ghlight ADV . CONFIG . 2. P res s OK and s creen will disp lay PA R AM E T E R 0 3. Use eit her ARROW key to scroll unt il t he disp lay read s the prope r parameter numb er (1 - 2 55 ) as indi cated in t he Z -Wave device’ s ins truc tions 4.
39 T o send device and network information to a secondary remote: 1. Enter Z -Wave setup mode and hi ghlight TRANSFER 2. P res s OK ; t he screen wi ll displa y CREA TE SECOND ARY 3. P re ss OK ; the screen w ill displ ay ALL 4. Pl ace the Second ar y remote in RECEIVE mode.
40 Pleas e refer to its in st ruc ti ons for details . 8. Ch ange indivi dual device s, groups , scenes, etc . on t he new secondary remo te as needed.
41 6. Pl ace the Second ar y remote in RECEIVE mode. See th e following se c tion o n “Receiving Net work and D evice Informat ion” if t he Second ar y remote is a GE 4 5608 remote. If the Secon dar y remote is a dif ferent G E model o r dif ferent brand, ple ase refer to it s ins tr uc tions for d etails.
42 Resetting Y our Network Y ou can reset your netw ork to clear all device and Z-Wave network information from the r emote. This does not reset the Z-Wave devices to their factory default . Each device still needs to be deleted in order to r eset them.
43 Network Update This function only works if y ou have a Static Update Controller (SUC) in your network. An SUC is permanently installed in a specific location and helps maintain up-to-date “neighbor lists” and routing tables for your control netw ork .
44 W ARRANT Y JASCO Products w arrants this product to be free fr om manufacturing defects for a period of two years from the original date of consumer purchase. This warranty is limited to the repair or r eplacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this product .
45 Setup Codes for Compatible Brands of Audio/Video Devices For Audio - Receiver ADC . . . . . . . . . . . . . . . . . . . . . . . . . 0531 Aiwa . . . . . . . 1405, 0121, 1388, 1641 Alco . . . . . . . . . . . . . . . . . . . . . . . . . 1390 AMC . . .
46 For Audio - Cassette Deck Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . 0029 Carver . . . . . . . . . . . . . . . . . . . . . . . 0029 Denon . . . . . . . . . . . . . . . . . . . . . . . 0076 Grundig . . . . . . . . . . . . . . . . . . . .
47 For Cable Set T op Box A-Mark . . . . . . . . . . . . . . . . 0008, 0144 ABC . . . . . . . . . . . . . 0237, 0003, 0008 Accuphase . . . . . . . . . . . . . . . . . . 0003 Acorn . . . . . . . . . . . . . . . . . . . . . . . . 0237 Action . . . . . .
48 For Satellite Set Top Box, cont . Mitsubishi . . . . . . . . . . . . . . . . . . . 0749 Motorola. . . . . . . . . . . . . . . . . . . . . 0856 Optimus . . . . . . . . . . . . . . . . . . . . . 0724 Panasonic . . . . . . . . . . . . . 0247, 0701 Paysat .
49 For Video - DVD , cont . Kloss . . . . . . . . . . . . . . . . . . . . . . . . 0533 Lasonic . . . . . . . . . . . . . . . . . . . . . . 0627 Lecson . . . . . . . . . . . . . . . . . . . . . . 1533 LG . . . . . . . . . . . . . . . . . . . . . . . . .
50 For Video - V CR , cont . Garrard . . . . . . . . . . . . . . . . . . . . . . 0000 Gateway. . . . . . . . . . . . . . . . . . . . . 1972 GE . . . 0060, 0035, 0000, 0807, 1060 Gemini . . . . . . . . . . . . . . . . . . . . . . 0060 Genexxa . . . . .
51 For T elevision A-Mark . . . . . . . . . . . . . . . . 0047, 0054 Accuscan . . . . . . . . . . . . . . . . . . . . 0047 Action . . . . . . . . . . . . . . . . . . . . . . . 0030 Admiral . . . . . . . . . . 0047, 0054, 0017, . . . . . . . . . . . . 0051, 0093, 0463, 0180 Advent .
52 For T elevision, cont . Aventura . . . . . . . . . . . . . . . . . . . . 0171 Baysonic . . . . . . . . . . . . . . . . . . . . 0180 Beaumark . . . . . . . 0017, 0178, 0030 Belcor . . . . . . . . . . . . . . . . . . . . . . . 0030 Bell & Howell .
53 For T elevision, cont . KEC . . . . . . . . . . . . . . . . . . . . 0180, 0060 Kenwood . . . . . . . . . . . . . . 0180, 0030 KLH . . . . . . . . . . . . . 0156, 0180, 0765 Kloss . . . . . . . . . . . . . . . . . . . . . . . . 0030 Konka . . . . . .
54 For T elevision, cont . Sheng Chia . . . . . . . . . . . . . . . . . . 0093 Shivaki. . . . . . . . . . . . . . . . . . . . . . . 0178 Siemens . . . . . . . . . . . . . . . . . . . . . 0145 Signature . . . . . . . . 0047, 0093, 0030 Simpson . . . . .
デバイスGE 45608の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
GE 45608をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGE 45608の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。GE 45608の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。GE 45608で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
GE 45608を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGE 45608の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、GE 45608に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGE 45608デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。