GefenメーカーGTB-UHD2IRS-ELRPOL-BLKの使用説明書/サービス説明書
ページ先へ移動 of 32
Audio Embedder 3GSDI GTB-UHD2IRS-ELRPOL-BLK User Manual 4K Ultra HD Extender w/ RS-232 and 2-way IR Release A2.
ii 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this product near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions.
iii Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notied within two (2) years from the da.
iv T echnical S upport (818) 772-9100 (800) 545-6900 8:00 AM to 5:00 PM Monday - Friday , Pacic Time Fa x (818) 772-9120 Email support@gefen.com We b http://www .gefen.com Mailing Addr es s Gefen, LLC c/o Customer Service 20600 Nordhoff St. Chatsworth, CA 9131 1 Pr oduct Regis tr ation Register your product here: http://www .
v v Operating Notes • CA T -5e (or better) cables should always be used. • The 4K Ultra HD Extender w/ RS-232 and 2-way IR will extend 1080p Full HD up to 495 feet (150 meters) and is limited to 8-bit color . 4K x 2K resolution can be extended up to 330 feet (100 meters).
vi Features • Extends 4K Ultra HD (3840 x 2160 @ 30 Hz, 8-bit color), RS-232, and bidirectional IR, up to 330 feet (100 meters) over a single CA T -5e cable (or better) • Extends HDMI at 1080p Ful.
Packing List The following items are shipped with the 4K Ultra HD Extender w/ RS-232 and 2-way IR. If any of these items are not present in the box when you rst open it, immediately contact your dealer or Gefen.
viii Table of Contents 1 Get ting Start ed Introduction............................................................................................................ 2 Sender unit .........................................................................
.
.
4K Ultra HD Extender w/ RS-232 and 2-way IR 1 Ge tting S t ar t ed Introduction............................................................................................................ 2 Sender unit .................................................
page | 2 Page Title Introduction Sender unit 4K Ultra HD S ELR-POL Extender w/RS-232 and 2-way IR IR Out RS-232 Link 24V DC Power HDMI IR In 4K Ultra HD S ELR-POL Extender w/RS-232 and 2-way IR IR Out.
page | 3 Page Title Introduction ID Name Description 1 24V DC Connect the included 24V DC power supply to this power receptacle. 2 Power This LED indicator will glow bright blue and will remain illuminated as long as the power supply is connected to the Sender unit.
page | 4 Page Title Introduction Receiver unit 4K Ultra HD R ELR-POL Extender w/RS-232 and 2-way IR IR Out RS-232 Link Power HDMI IR Ext 4K Ultra HD R ELR-POL Extender w/RS-232 and 2-way IR IR Out RS-.
page | 5 Page Title Introduction ID Name Description 1 Power This LED indicator will glow bright blue and will remain illuminated as long as the power supply is connected to the Receiver unit. See Power LED Status (page 10) for details on LED status messages.
page | 6 Connection Instructions ► Video 1. Connect the included HDMI cable between the Ultra Hi-Def source and the HDMI port on the Sender unit. 2. Connect an Ultra HD display to the HDMI port on the Receiver unit using another HDMI cable. ► CA T -5 3.
page | 7 Sample Wiring Diagram GTB-UHD2IRS-ELRPOL-BLK Sender Receiver HDMI C ABLE C A T -5e C ABLE IR Emitter IR Input IR IR Extender 4K Ultra HD Source 4K Ultra HD Display Automation Device IR Emitter (Up to 495 ft) RS-232 C ABLE RS-232 Controlled Device Information The wiring diagram, shown above, requires an additional IR emitter (Gefen part no.
.
4K Ultra HD Extender w/ RS-232 and 2-way IR 2 Basic Oper ation Power LED Status ............................................................................................... 10 Sender unit LED ........................................................
page | 10 Power LED Status The Power LED indicator on the Sender and Receiver unit provides basic information on the current status of the 4K Ultra Extender w/ RS-232 and 2-way IR. Sender unit LED Status Description Off • Sender unit is not powered.
page | 1 1 Power LED Status Receiver unit LED Status Description Off • Receiver unit is not receiving power from Sender unit. Inspect CA T -5 cable between Sender and Receiver unit. • Check the power supply . Solid blue • Link is established between Sender and Receiver unit.
page | 12 Page Title Controlling the Source from the Viewing Location 1. Connect the included IR extender to the IR Ext port on the Receiver unit. 2. Connect the included IR emitter from the IR Out port on the Sender unit to the IR sensor on the source device.
Controlling the Display from the Source Location 1. Connect the 3.5mm mini-mono connector from the IR In port on the Sender unit to the automation system. 2. Connect the included IR emitter from the IR Out port on the Receiver unit to the IR sensor on the display .
page | 14 Distance Setting This product passes through the display’s EDID to the source. If the display is capable of accepting Deep Color , the source must be manually congured to output 8-bit color . This is only applicable when using 4K x 2K resolutions and “long-run” modes.
.
.
4K Ultra HD Extender w/ RS-232 and 2-way IR 3 Appendix Surface Mounting Instructions ............................................................................. 18 Network Cable Diagram ...............................................................
page | 18 The Sender and Receiver units can be mounted on any at surface, as shown below (screws not included). There should be an inch or two of clearance between the edges of the unit and any walls or vertical surfaces to allow for enough clearance for connection and disconnection of the HDMI cables.
page | 19 Network Cable Diagram Front of RJ-45 Connector Gefen recommends the TIA/EIA-568-B wiring option. Use the following table when terminating cables in the eld.
page | 20 Supported Formats Video • 4K x 2K • 1920 x 1200 (WUXGA) • 1080p Full HD Audio • 7.1 Linear PCM • Dolby® T rueHD • DTS-HD Master Audio™ Connectors, Indicators, and Controls HDM.
page | 21 Index Basic Oper ation C Connection Instructions 6 D DIP Switch Conguration 14 Distance setting . See DIP Switch Conguration F Features vi I Installation 6 IR Control 12 controlling the display 13 controlling the source 12 L LED Status 10 “long-reach” mode .
20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com Stretch it. Switch it. Split it. Gefen’s got it. ® 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.
デバイスGefen GTB-UHD2IRS-ELRPOL-BLKの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Gefen GTB-UHD2IRS-ELRPOL-BLKをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGefen GTB-UHD2IRS-ELRPOL-BLKの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Gefen GTB-UHD2IRS-ELRPOL-BLKの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Gefen GTB-UHD2IRS-ELRPOL-BLKで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Gefen GTB-UHD2IRS-ELRPOL-BLKを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGefen GTB-UHD2IRS-ELRPOL-BLKの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Gefen GTB-UHD2IRS-ELRPOL-BLKに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGefen GTB-UHD2IRS-ELRPOL-BLKデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
