GefenメーカーGTV-HT-AUDPROCの使用説明書/サービス説明書
ページ先へ移動 of 31
Home Theater Audio Processor User Manual www .gefentv .com GTV -HT -AUDPROC.
ASKING FOR ASSIST ANCE T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM PST Monday thru Friday . Write T o: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 8 Connecting The Home Theater Audio Processor 9 GTV -AUD-IR Remote Layout 10 GTV -AUD-IR Remote Descriptions 1 .
1 Congratulations on your purchase of the GefenTV Home Theater Audio Processor . Y our complete satisfaction is very important to us. GefenTV GefenTV is a unique product line catering to the growing needs for innovative home theater solutions.
2 READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE HOME THEA TER AUDIO PROCESSOR • The GefenTV Home Theater Audio Processor is designed to be used with speakers, using fi ve full-bandwidth channels and one low frequency channel.
3 Supported HDMI 1.3 Features • 225 MHz (up to 12-bit YUV 4:4:4 @ 1080p) • Deep Color support (x.v .Color) • Lip-Sync pass-through • CEC pass-through Features • Separates digital audio from the HDMI or of S/PDIF inputs and decodes up to 5.
4 Back Front 22 21 20 19 17 18 16 15 14 13 12 P ANEL LA YOUT 1 11 78 9 1 0 5 4 3 26.
5 1 Power Status LED Indicator This LED will indicate the current power state. When the LED is red, the unit is in standby mode. When the LED is green, the unit is on. 2 Infrared Sensor This infrared sensor will accept commands from the included GTV -AUD-IR remote control.
6 P ANEL DESCRIPTIONS 9 Mode / OK Button This button will change the Processing Mode when not in the Menu System. While in the Menu System this will be used as a con fi rmation button. 10 Exit Button This button is used to exit the current menu level and return to the previous/ parent level.
7 P ANEL DESCRIPTIONS 17 Optical (T OSLINK) Audio Output This output is constantly active. Audio that is extracted from the input HDMI source device or via the coaxial input is directly output through this connector . Processing and features of the Home Theater Audio Processor are not applied to the audio passing through this connector .
8 How to Connect the Home Theater Audio Processor 1. Connect an HDMI source device to the HDMI input port of the Home Theater Audio Processor using the included HDMI cable. 2. Optionally , connect an additional audio source to the coaxial (S/PDIF) input using a user supplied coaxial cable.
9 GTV -AUD-IR REMOTE LA YOUT 7 8 10 9 11 12 13 14 15 6 5 3 4 2 1 Home Theatre Audio Processor Remote Control.
10 GTV -AUD-IR REMOTE DESCRIPTIONS 1 Power Off This is a discrete power off button. Pressing this button will turn the Home Theater Audio Processor off. 2 Mode This button functions the same as the Mode button on the front panel. 3 Left This button will navigate left when using the Menu System.
11 T o use the GTV -AUD-IR remote, remove the battery cover on the back of the remote to reveal the battery compartment. Insert the included battery into the open battery slot. The positive (+) side should be facing up. Ensure that both DIP (Dual Inline Package) switches are in the OFF position.
12 NA VIGA TION The Home Theater Audio Processor uses a series of buttons, located on the front panel, for all input selection and feature functions. All status information, such as the input audio type, are always available on the front panel LCD Screen .
13 OPERA TING THE HOME THEA TER AUDIO PROCESSOR MAIN DISPLA Y The Main Screen will display useful information to the user . It displays the currently selected input port and audio input format. The currently used output format can also be displayed by pressing the ▼ button.
14 3 - AUDIO FORMA T This portion of the screen will display the current audio inputs format. Please use the table below to determine what formats are accepted by each input type.
15 MENU SYSTEM NA VIGA TION The Menu System will allow the user to con fi gure features of the Home Theater Audio Processor . The front panel buttons are used to navigate the Menu System . Feature con fi guration can also be accomplished via the IR remote control.
16 SPEAKER SIZE This menu option will allow the user to select the speaker size to either SMALL or LARGE. When a speaker size is set to SMALL, all frequencies below 80Hz are automatically routed to the subwoofer channel. When a speaker size is set to LARGE, all frequencies will be routed to the speaker .
17 • Front R - These settings will af fect the front right channel output (default is +00dB). • Surr R - These settings will af fect the surround right channel output (default is +00dB). • Surr L - These settings will af fect the surround left channel output (default is +00dB).
18 T ONE CONTROL This menu option will allow the user to adjust the bass and treble settings. These features were designed to allow the user to adjust the sound to their taste. Both the treble and bass settings can be adjusted in 1db increments between -12dB and +12dB .
19 When fi nished, press the ▼ or ▲ to move to another selection. Alternately , the user can press the OK button to immediately cycle to the next option. T o return to the previous menu, press the EXIT button. T o exit the entire Menu System, press the MENU button.
20 SPEAKER FORMA T T ABLE SPEAKER AND FORMA T T ABLE Speaker Size FavProcMode FL_R CT SL_R SUB SL_R PLII(1) Direct(2) Stereo(3) Mch Stereo(4) Mono(5) PCM2ch / Dolby_2ch Small Small Small onsub Small 5.1ch 2.1ch 2.1ch 5.1ch 1.1ch Small Large onsub Large 5.
21 SPEAKER FORMA T T ABLE SPEAKER AND FORMA T T ABLE Speaker Size FavProcMode FL_R CT SL_R SUB SL_R PLII(1) Direct(2) Stereo(3) Mch Stereo(4) Mono(5) PCM5.1ch / AC3_5.1ch Small Small Small onsub Small — 5.1ch 2.1ch 5.1ch 1.1ch Small Large onsub Large — 5.
22 BI-AMPING BI-AMPING The Home Theater Audio Processor features 2 additional outputs, both speaker terminals and RCA outputs, for bi-amping the front right and left audio channels. These outputs were intended to supply an additional set of front right and left audio channels for use with an ampli fi er or bi-ampable speaker .
23 54321 9876 12345 6789 Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface RS-232 Settings Bits per second ................................................................................................. 19200 Data bits .
24 RS-232 COMMANDS RS-232 Command T able Command Code Response Description POWER 0 > POWER OFF POWER OFF POWER 1 > POWER ON POWER ON VOL +10~-60 > VOL +10~-60 Audio volume adjust from maximum.
25 RS-232 COMMANDS Command Code Response Description SIZEFLR 0 OK Front speaker Small SIZEFLR 0 OK Front speaker Large SIZEC 0 OK Center speaker Small SIZEC 1 OK Center speaker Large SIZEC 2 OK Center.
26 Maximum Pixel Clock .............................................................................. 225 MHz Input DDC Signal ................................................................................5V p-p (TTL) Maximum Power Output ..........
27 W ARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is noti fi ed within two (2) years .
Rev A5 Pb 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www .gefen.com support@gefen.com This product uses UL listed power supplies.
デバイスGefen GTV-HT-AUDPROCの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Gefen GTV-HT-AUDPROCをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGefen GTV-HT-AUDPROCの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Gefen GTV-HT-AUDPROCの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Gefen GTV-HT-AUDPROCで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Gefen GTV-HT-AUDPROCを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGefen GTV-HT-AUDPROCの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Gefen GTV-HT-AUDPROCに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGefen GTV-HT-AUDPROCデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
