GeovisionメーカーGV-HYBRIDLPRの使用説明書/サービス説明書
ページ先へ移動 of 151
Before attempting t o connect or operate this product, please read these instructions carefully and save this manual f or future use. User's Manual GV-Hybrid LPR C amer a 20R / 10R / GV-IP LPR C .
© 2014 GeoV ision, Inc. A ll rights reserv ed. Under the copyright laws, this manual may not be copied, in w hole or in part, without the written consent of GeoV ision. Every ef fort has been made to ensure that the in formation in this manual is accurate.
i Preface Welcome to the GV - Hybrid LPR Camera 20R / 10R / GV -IP LPR Ca mera 5R User ’ s Manual . The GV -IP LPR Camera has a series of models designed to meet different needs. T his manual is designed for the following m odels and firmware versions: Models Firmware Version GV-Hybrid LPR Camera 20R 1.
ii Content s Naming Defi nition...................................................................................................... v Options …….. ..................................................................................................
3.8 R emote Confi gurati on ............................................................................................. 42 3.9 C amera Name Dis pla y ............................................................................................ 42 3.10 Image Enhancem ent .
iv Chapter 5 Advanced Applications ....................................................................... 97 5.1 U pgrad in g Sy stem Fi rmwa re................................................................................... 97 5.1.1 U sin g the We b Inte rface.
v Naming Definition GV -Sy stem GeoVision Analog and Digital V ideo Recording Software. The GV -Sy stem a lso refers to Multicam System , GV -NVR System , GV -DVR System and GV -Hybrid DVR S ystem at the sa me time . Options Optional devices can exp and your camera’ s c apabilities and versat ility .
vi Note for Connec ting to GV -System The GV -Hybrid LPR Camer a 20R / 10R / GV -IP LPR Camera 5R is designed to work with and record on GV -System, a hy brid or digital video management system. Once the camera is connected to the GV-System, the resolution set on the GV-Sy stem will override the resolution set on the camera’s W eb interface.
vii Note for Inst alling Camera Out door W hen ins talling the GV -Hybrid LPR Camera 20R / 10R / GV -IP LPR Camera 5R ou tdoor , mind the following : 1. Set the camera above the junction box to prevent water from entering the camera along the cables. 2.
viii Note for A djusting GV -Hybrid LPR Camera 20 R During the operation of the GV -Hybrid LPR Camera 20R, t he external IR Illuminator is at the high temperat ure of up to 50°C (122°F). When adjusting the camera angle or reinstalling the camera, avoid touching the surface of the ex ternal IR Illuminator .
Chapter 1 Introduction 1.1 GV -H ybrid LPR Ca mera 20R / 10R The GV -Hybrid LPR Camer a 20R, w ith an external IR Illuminat or , is a 1.3 M P B/W network camera designed solely for recognition of reflective license plates on vehicles traveling at 120 km/hr (75 mph) or less.
2 1.1.1 Features • 1.3 megapixel B/W progressive scan CMOS • Dual streams from MJPEG or H.264 • Up to 30 fps at 1280 x 1024 • Recognition for reflective License Plate only • Maximum Speed 120 km/h ( 75 mph) • Ingress protection (IP67) • Vandal Resistance (IK10) • Maximum IR distance 22 m (72.
Introduction 3 1 1.1.2 Sy stem Requirements T o access the camera functions and settings through Web brow ser , ensure your PC is in good network connection and use one o f the following Web browsers: • Microsoft Internet Explorer 7.x or lat er • Google Chrome • Mozilla Firef ox • Safari Note: 1.
4 1.1.3 Pack ing List • GV-Hybrid LPR Camera 20R / 10R • Iron Screw Anchor x 4 (for GV-Hybrid LPR Camera 20R only) • Plastic Screw Anchor x 4 (for GV-Hy brid LPR Camera 10R only) • Expansion S.
Introduction 5 1 1.1.4 Camera Ov ervie w T o access the functional panel o f the GV -Hybrid LPR Camer a 20R / 10R, follow the section below to remov e it s cam era co ver firs t. Figure 1-1 No. Name Description 1 IR power plug Supplies power to the built-in IR LEDs.
6 1.1.5 Device Installation 1.1.5.1 In st allation Guidelines To produce quality image and to avoid software recognition errors, make sure y ou adhere to the guidelines when installing your GV-Hybrid LPR Camer a 20R / 10R . See GV-L PR C amera Install atio n Guid e .
Introduction 7 1 6. Based on the live vi ew, adjust the angle of the camera. Loosen the indicated screw with the supplied big torx wrench and adjust the joint.
8 7. Based on the liv e view, adjust the focus and z oom of the camera. A. Unscrew the cover with the supplied small torx wrench. Figure 1-6 B. Hold the connectors and unplug them. Figure 1-7 Important: 1. Unscrew and remove the cov er carefully. Pulling the cover off may cause dama ges to the inner wiring of the camera.
Introduction 9 1 8. Replace the silica gel bag. Paste the sticker to the front side of the silica gel bag. Press the sticker several t imes to make sure it adhe res properly.
10 1.1.6 Connecting the Camera Follow the steps below to connect your GV-Hybrid LPR Camera 20R / 10 R. 1.1.6.1 GV -Hy brid LPR Camera 20R 1. Optionally connect a speaker to the green RCA w ire and an external microphone to the pink RCA wire. 2. Optionally connect a monitor to the black BNC wire.
Introduction 11 1 1.1.6.2 GV -Hy brid LPR Camera 10R 1. Optionally connect a speaker to the green RCA w ire and an external microphone to the pink RCA wire. 2. Optionally connect a monitor to the black BNC wire. Enable the TV-Out function by selecting the correct signal format at the TV Out field on the Web interface.
12 1.1.6.3 W ire Definit ion GV-Hybrid LPR Camera 20R Figure 1-12 Camera Wire C olor Definiti on Black (t hick) PoE Black BNC TV out Green RCA Audio Out Pink RCA Audio In IR Illuminator The black cable consists of three w ires.
Introduction 13 1 GV-Hybrid LPR Camera 10R Figure 1-13 No. Wire C olor Definiti on 1 Black (thick) PoE 2 Black BNC TV out 3 Green RCA Audio Out 4 Pink RCA Audio In.
14 1.2 GV -IP LPR Camera 5R Ideal for parking lot installation, the GV -IP LPR Camera 5R is a 1.3 MP B/ W ne twork camera designed for recognition of reflective license plate s on vehicles traveling at 60 km/hr (37 mph) or less.
Getting S ta rted 15 2 1.2.1 Features ․ 1. 3 megapixel B/W progressive scan CMOS ․ Motoriz ed va rifocal le ns for re mote focus / z oom a djustme nt ․ Dual st reams from MJPEG or H.
16 1.2.2 Sy stem Requirements T o access the camera functions and settings through Web brow ser , ensure your PC is in good network connection and use one o f the following Web browsers: • Microsoft Internet Explorer 7.x or lat er • Google Chrome • Mozilla Firef ox • Safari Note: 1.
Getting S ta rted 17 2 1.2.3 Packing List ․ G V-IP LPR Camer a 5R ․ Self Tapping Screw x 3 ․ Plast ic Screw Anchor x 3 ․ T orx W rench x 2 ․ Sun- Shield Cover Kit (1 Sun-Shield Cover, 2 Phil.
18 1.2.4 Overv iew Figure 1-14 No. Name Description 1 Default Resets a ll con figu rations o f the GV -IP LPR C amera 5R to the default f actory settings .
Getting S ta rted 19 2 1.2.5 Device Installation 1.2.5.1 In st allation Guidelines To produce quality image and to avoid so ftware recognition errors, make sure you adhere to the guidelines when installing your G V-IP LPR Camera 5R. See GV-L PR Camera Ins tall atio n Gui de .
20 1.2.6 Connecting the Camera It is suggested to use GV -P A191 PoE Adapter to connect the GV -IP LPR Camera 5R t o the network. Follow the step s below for connection. 1. Connect the camera’s cable to the GV-PA191 Po E Adapter as illustrated below.
Getting S ta rted 21 2 1.2.7 Adjusting the Angles The GV-IP LPR Camera 5R is designed to be adjustable in three shafts for easy and flexible installation. Fir st Sha ft You can adjus t the came ra body by 360 degrees to the ri ght or the left. 1. Unscrew the panning lock screw with the torx wrench.
22 Second Shaft You can adjust the came ra body up and dow n by 90, 112.5, 135, 157.5 or 180 degrees by using the gears inside the camera body and the camera base. 1. Unscrew the tilting lock screw with the torx wrench. Torx Wr ench Tilting Lock Screw Figu r e 1- 19 2.
Getting S ta rted 23 2 Third Shaft You can adjust the came ra base by 360°. 1. Unscrew the base fixing screw with the torx w rench. Figure 1-22 2. Adjust the angle of camera base , and fasten the b ase fixing screw.
24 1.2.8 Replacing the Silica Gel Bag To replace the original silica gel bag wi th a new one, follow the steps below. 1. Loosen the camera’s cover. Camera ’ s Cove r Figure 1-24 2.
Getting S ta rted 25 2 1.2.9 Installing the Su n-Shield Co ver After se ttin g up the B ulle t Came ra, no w y ou can insta ll the sun-sh ield cov er to the ca mera . 1. Fasten the hexagon screw s either on top or below the came ra. Figure 1-26 2. Put the sun-shield cover on top o f hexagon screws.
26 Chapter 2 G etting S t arted 2.1 Looking U p the IP A ddres s By default, your GV -Hybrid LPR Camer a 20R / 10R / GV -IP LPR Camera 5R is assi gned with an unused IP address by the DHCP ser ver when the came ra is connected to the netw ork. This IP address remains unchanged unless y ou unplug or disconnect your camera from the network.
Getting S ta rted 27 2 3. Click the Name or Mac A d dress column to sort. Figure 2-2 4. Find the Mac Address of the camera to see its IP address. Changing the IP A ddress T o modify the s tatic IP address or set the camera to a public dynamic IP address, log in the Web interface to access the ne twork setting page.
28 4. Select S t atic IP add ress or PPPoE and type the required network information. 5. Click Apply . The camera is now accessible by entering the assigned IP address on the Web browser .
Getting S ta rted 29 2 2.2 A ccessing Y our Sur veillance Ima ges Follow these steps to ac cess your surveillance images: 1. Open t he Internet Explorer browser. 2. Enter the IP address or domain name of the GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR Camera 5R in the Location/Address field of your browser.
30 2.3 Configuri ng the Basic s Once you have inst alled and logged in the GV -Hybrid LPR Camera 20R / 10R / GV -IP LPR Camera 5R, you are ready to configure some of its primary settings through the Web interf ace: • Date and time adjustment: see 4.
Chapter 3 Guest Mode a nd Liv e V ie w Pane l This section introduces the features of the guest mode and the Live V iew window . Main Page of Guest Mod e Figure 3-1.
32 3.1 The Li ve V iew Window In the left menu, click Live View , and th en se lec t Camera to see the live video. Figure 3-2 No. Name Function 1 Play Plays live video. 2 S t op S t ops play ing video. 3 Microphone T alks to the surveillance area from the local computer .
Guest M ode and L ive View Panel 33 3 No. Name Function 7 Full Screen Switches to full screen view . Right-click t he image to have these options: Snap shot , Full Screen , Resolu tion , PIP , P A P , GPS and Google Map s . --- See 3.5 Picture-in-Picture and Picture-and-Picture View .
34 3.2 The Control Panel of the Live V iew Window T o open the control panel of the Live V iew window , click the arrow button on top of the viewer . Y ou can access the following functions by using the right and lef t arrow buttons on the control panel.
Guest M ode and L ive View Panel 35 3 [Camera A djustment] Adj u st t he i mag e q ua lit y set t ing s. Cli ck Save to store the changes to the se ttin gs. Figure 3-4 Brightness: A dju st the bri g htn es s of t he i mag e. Contrast: Adjust the relative dif ferences between one pix el and the next.
36 Slowest Shutter Speed: Set the shutter speed. Shutter speed con trols the amount of the lights enters the image sensor and directly impacts the quality of image presentation.
Guest M ode and L ive View Panel 37 3 3.3 Snap s hot of a Li ve Video T o take a snapsh ot of live video, follow these steps: 1. Click t he Snapshot button (No. 5, Figure 3-2). The Save As dialog box appears. 2. Specify Save in , type the File name , and select JPEG or BMP for Sav e as Type .
38 3.5 Picture-in-Picture a nd Picture-a nd-Picture V iew The Live V iew window prov ides two types of close-up view s: Picture -in-Pictu re (PIP ) and Picture-and Picture (P A P) . The tw o views are use ful t o provide clear and detailed images of the surveillance area.
Guest M ode and L ive View Panel 39 3 Picture-and-Picture View W ith the Picture-and-Picture (PAP) view , you can create a split video effect with multiple close-up views on the image. A to tal of 7 close-up vi ews can be defined. Figure 3-6 1. Right-click t he live v iew and select PAP .
40 3.6 Alarm Noti fication W hen a motion is detect ed, you can be alerted by a pop-up live video and v iew up to four captured images. Figure 3-7 T o con figur e this function, click the Show System Menu button (No. 8, Figure 3-2), and select A larm Notify .
Guest M ode and L ive View Panel 41 3 3.7 Video and A udi o Confi guratio n Y ou can enable the microphone and speaker for tw o-way audio communication and adjust the set the number of frames to keep for live view buffer . Click th e Sho w System Menu button (No.
42 3.8 Remote Co nfigurati on Y ou can upgrade the dev ice firmware over the netw ork . Click the Show System Menu bu tton (No. 8, Figure 3-2), and select Remote Config . The Remote Config dialog box w ill appear . [Firmware Upgrade] In this tab, you can up grade the firmware over the ne twork.
Chapter 4 Administrator Mode The Administrat or can access and configure the GV - Hybrid LPR Camera 20R / 10R / GV -IP LPR Camera 5R over the network. The configuration categories include: Video and Motion , Event s and A l ert s , Monito ring , Recording Sch edule , Remot e V iewLog , Net wor k , and Management .
44 Corresponding Section for Configuration Menu Find the topic of interest by re ferr ing to the indicated section. 4.1 Video and M otion 4.1.1 Video Settings 4.1.2 Motion Detection 4.1.3 Privacy Mask 4.1.4 T ext Overlay 4.1.5 T am pering Alarm 4.2 Events and Alerts 4.
A dministrator Mode 45 4 4.1 Video & Motion The GV -Hybrid LPR Came ra 20 R / 10R / GV -IP LPR Camera 5R suppo rts dual s treams, S t reaming 1 and S treaming 2, which allow separate codec and resolutions settings for a single video transmission.
46 4.1.1 Video Settings Figure 4-2A.
A dministrator Mode 47 4 Figure 4-2B [Name] Rename the camera. The camera name will appear on the Liv e V iew . T o display the camera name, see 3.9 Camera Name Display .
48 [Conn ection T emplate] Select the type of your netw ork connection. Unless you select Customized , th is op tion w ill automatically bring up the recommended video resolution, frame rate, bandwidth and GOP size. [Video Signal Type] Select the codec type, resolution and frame rate.
A dministrator Mode 49 4 [Video Slic e Mode] Select Single Slice if the camera is displayed on a third- party NVR/DVR so ft ware and the liv e view is incomplete or broken. The de fault is Au t o . [Reco rd Set tings ] Note this function is not available for GV-Hy brid LPR Camera 20R / 10R .
50 [LED Control] Ready LED: Select Disable if you do not wish to use the Status LED. Note this function is not available for GV-IP LPR Camer a 5R . [LPR Settin g] Setup Mode: Select En able to keep the brightness o f the live view w hen the camera’s cover is removed for focus adjustment.
A dministrator Mode 51 4 4.1.2 Motion Detection Motion detection is used to generate an alarm whenever movement occur s within the scene. Y ou can con figur e up to 8 de tection zones with di fferent sensitivity values. Create at leas t one detection zone to enable this function.
52 4.1.3 Privacy M ask The Privacy Mask can bl ock out sensitive areas from view , covering the areas w ith dark boxes in both live view and recorded clips. T his feature is ideal for privacy protection on locations with private information, keyboard sequences (e.
Administrator Mode 53 4 4.1.4 T ext Overlay The T ext Overlay allows you to overla y any text in any place on the camera view . Up t o 16 text messages can be created on one camera view . The overlaid text will be saved in the recordings. Figure 4-5 1.
54 4.1.5 T ampering Alarm Note this function is not available for GV-IP LPR Camera 5R . The Tampering Alarm is used to detect whether a camera is being physically tampered. An e-mail alarm can be sent when the camera is moved, covered up, or out of focus.
A dministrator Mode 55 4 5. To tr igger an alarm when the scene turns dark, e. g. the lens of camera has been covered, select A larm for Dark Images . 6.
56 4.2 Event s & A lert s For motion and tampering ev ents, the Administrator can set up tw o types of alert: 1. Send a captured image by e-mail or FTP. See 4.2.1 E-Mail and 4. 2.2 FT P . 2. Notify Center Monitoring Stations such as Center V2, VSM, by v ideo or text alerts.
A dministrator Mode 57 4 4.2.1 E-mail W hen a motion is detected, the GV -Hybrid LPR Camera 20R / 10R / GV -IP LPR Camera 5R can send an e-mail alert, con taining a captured image to a remote user . Important: To send e-mail alert upon motion / tampering ev ents, make sure y ou also enable the Motion Detection / Tampering Alarm function.
58 6. Alerts interv al time in minute : Specify the interval between e-mail alerts. The valid interval is fr om 0 to 60 mi nutes. This option is useful for frequent event occurrence.
A dministrator Mode 59 4 4.2.2 FTP Y ou can also send the ca ptured image to a remote F TP server for alerts . Important: T o send F TP alert upon motions, be sure to set up the detection area on the Motion Detection page. For details, see 4.1.2 Motion Detection .
60 6. Alerts interv al time in minute : Specify the interval between FTP alerts. The interval can be between 0 and 6 0 minutes. The option is use ful f or frequent event occurrence.
A dministrator Mode 61 4 4.2.3 Center V2 The central monitoring station Center V2 can be notified of a motion event by live videos and tex t alert s. Up to two Center V2 servers can be connected. For live monitoring through Center V2, you must already have a subscriber accoun t on each of the Center V2 server .
62 T o enable the Cente r V2 connection: 1. A ctivate L ink: Enable th e monitoring through Center V2. 2. Host Name or IP A ddress: Type the host name or IP address of Center V2. 3. Port Numbe r: M atch th e p ort to Port 2 on Center V2. Or keep the default value 5551 .
A dministrator Mode 63 4 4.2.4 VSM The central monitoring station VSM can be notified o f a motion event by text alerts. Up to two VSM servers can be con nected. For live monitoring through VSM, you must already hav e a subscriber account on e ach of the VSM server .
64 T o enable the VSM connection: 1. A ctivate L ink: Enable the monitoring thr ough VSM. 2. Host Name or IP A ddress: Type the host name or IP address of VSM . 3. Port Numbe r: M atch th e p ort to Port 2 on VSM or keep the de fault value 5609 . For details, see 7.
A dministrator Mode 65 4 4.2.5 Backup Center Note this function is not available for GV-Hy brid LPR Camera 20R / 10R . The connection to the GV-Backup Center allows you to back up ano ther copy of recordings and system log to the GV-Bac kup Center on an o ff site location while the camera is saving these data to the memory card.
66 3. Port Numbe r : Match the communication por t on the GV-Backup Center or keep the default value 30000 . 4. User Name : Type a valid user name to log into the GV-Backup Center. 5. Password : Type a valid password to log into the GV-Backup Center. 6.
A dministrator Mode 67 4 4.2.6 GV -V ideo Gate way / GV -Recording Server The GV-Video Gateway and GV-Recording Server a re video streaming servers desi gned for large-scale video surveillance deployments.
68 T o enable connec tion to GV -Video Gateway / GV -Recording Server: 1. A ctivate L ink: Enable the monitoring through GV-Video Gateway / GV-Recording Server. 2. Host Name or IP A ddre ss: Type the host name or IP address o f the GV-Video Gateway / GV-Recording Server.
A dministrator Mode 69 4 4.2.7 V iewLog Note this function is not available for GV-Hy brid LPR Camera 20R / 10R . The V iewLog Server is designed for remote playback function. This server allows you to remotely access the recorded files saved at the camera and play back vi deo with the V iewLog player .
70 4.2.8 RTSP The R TSP Server enables vi deo and audio streaming to your 3G-enabled mobile phone. F i g u r e 4 - 1 5 A ctivate Link: Enable the RTSP / 3GPP service. RTSP/TCP Port: Keep the default value 8554 , or modi fy it i f necessa ry. RTP/UDP Port: Keep the default r ange from 17300 to 17319 , or modify it if necessary.
A dministrator Mode 71 4 4.3 Monitoring Configure the m onitoring sett ings for G V -Hybrid LPR Cam era 20R / 10R / GV -IP LPR Camera 5R. 4.3.1 GV -Hy brid LPR Camera 20R / 10R Figure 4-16 [Activate e-mail and FTP alert] Allows the camera to send e- mail and/or FTP alert upon motion events.
72 4.3.2 GV -IP LPR Camera 5R Y ou can star t monitoring manually or by schedule. Important: This function is currently not supported in GV -IP LPR Camera 5R. Figure 4-16 [Manua l] M anually activates motion detection. Select one of the following options and click the Sta r t button .
A dministrator Mode 73 4 4.4 Recording Sched ule Note this function is not available for GV-Hy brid LPR Camera 20R / 10R . The schedule is provided to activ ate recording on a speci fic time each day . Important: This function is currently not supported in GV -IP LPR Camera 5R.
74 4.5 Netw ork The Network section includes some basic but importan t network configurations that enable the GV -Hybrid LPR Camera 20R / 10R / GV -IP L PR Camera 5R to be connected to a TCP/IP network. 4.5.1 L AN Configurati on According to your network environment, select among S tatic IP , DHCP and PPPoE.
A dministrator Mode 75 4 PPPoE: T he netw ork environment is xDSL connection. Type the Username and Password provided by ISP to establish the conne ction. If you use the xDSL connection with dynamic IP addresses, first use the DDNS function to obtain a do main name linking to the camera’s changing IP ad dress.
76 4.5.2 Adv anced TCP/IP This section introduces the advanced TCP/IP se ttings, including DDNS Ser ver , HTTP po rt, streaming port and UPnP . Figure 4-19A.
A dministrator Mode 77 4 Figure 4-19B [Dy namic D NS S erv er S ettings ] DDNS (Dynamic Domain Name System) provides a convenient way of accessing the GV-Hy brid LPR C ame ra 20R / 10R / GV-IP LPR Camera 5R when using a dynamic I P.
78 To enable the DDNS function: 1. Enable: Enable the DDNS f unction. 2. Service Provider: Select the DDNS service provider you hav e registered with. 3. Host Name: Type the host name used to link to th e GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR Camera 5R.
A dministrator Mode 79 4 [UPnP Settings] UPnP (Universal Plug & Play) is a networking ar chitecture that provides compatibility among networking equipment, software and peripherals of the 400+ vendors tha t are part of the Universal Plug and Play Forum.
80 4.5.3 IP Filterin g The Administ rator ca n se t IP filterin g to res tric t acce ss to the GV -Hybri d LP R Came ra 20 R / 10R / GV -IP LPR Ca mer a 5R . Figure 4-20 To enable the IP Filter function: 1. Enable IP F ilte ring : Enable the IP Filtering function.
A dministrator Mode 81 4 4.5.4 SNMP Settings The Simple Network Management Protocol (SNMP) allows you to monitor the status of the GV -Hybrid LPR Cam era 20R / 10R / GV -I P LPR Camera 5R through SNMP netw ork mana gement so ftw are. Figure 4-21 To allow management of SNMP software: 1.
82 7. Type the Authentication Password and C urrent Pass w ord (Encry pted) . You will need to type these passwords in the SNMP software to be able to acces s the GV-Hybrid LPR Camera 20 R / 10R / GV-IP LPR Camer a 5R.
A dministrator Mode 83 4 4.6 Manageme nt The Management section includes the settings o f data and time, GPS M aps and user account. Also you can view the firmware version and execute cer tain system operations. 4.6.1 Date and T ime Settings The date and time settings are used for date and time stamps on the image.
84 [Date & Time on GV-IP CA M] Displays the current da te and time on the GV-Hybrid LPR Camera 20 R / 10R / GV-IP LPR Camer a 5R. [Time Zone] Sets the time zone for local settings. Select Enable Day light Savin g Time to automatically adjust the GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR Camera 5R for daylight saving time.
A dministrator Mode 85 4 4.6.2 GPS Map s Settings The Ma ps S ettin gs al low s yo u to se e th e lo cation of your GV -Hybri d LPR Ca mera 2 0R / 10R / GV -IP LPR Camera 5R o n Google maps, without the need of a GPS dev ice. To see the location of your GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR Camera 5R on maps: 1.
86 4. Click Open . A warning message appears. F i g u r e 4 - 2 6 5. Right-click the warning message and select Allow Blocked Content . The map will be displayed. The icon indicates the location of your camera. In the upper right corne r you have options to view different map formats, such as Satellite and Hybrid.
A dministrator Mode 87 4 4.6.3 S torage Settings Note this function is not available for GV-Hy brid LPR Camera 20R / 10R . The GV -IP LPR Camera 5R can support memo ry cards for video and audi o recordings. Y ou need to format the storage dev ice by using the following S torage Settings.
88 Keep days (1-255): Specify the number of days to keep t he files from 1 d ay to 255 days. W hen b ot h Keep days and Enable recycling are selected, the syste m applies w hichever condition comes first. For example, if the speci fied smallest amount of storage space comes earlier than the designated keep day s, then recycle is applied first.
A dministrator Mode 89 4 The storage device status is show n in the status column: Status Description Formatting The storage device is being formatted. Unknown The camera can not recognize the format of the stora ge device or the OK Stora ge for matti ng i s suc cess ful.
90 4.6.4 User Account Y ou can change the logi n name and p assword of Adm inistrator and Guest accounts. • T he default Administrat or login name and p assw ord are admin .
A dministrator Mode 91 4 4.6.5 Log I nformation The log contains du mp data that is used by service personnel for analyz ing problems. Figure 4-30.
92 4.6.6 S y stem Log Note this function is not available for GV-Hy brid LPR Camera 20R / 10R . The System Log records the events in the four types o f logs: System Event , Monitorin g Event and Login/Logout Event . W ith the Sy stem Log, you can search a nd obtain the detailed information of an event.
A dministrator Mode 93 4 F i g u r e 4 - 3 2.
94 4.6.7 T ools This section allows you to execute certain sy stem operations and view the firmware version. F i g u r e 4 - 3 3.
A dministrator Mode 95 4 [Host S ett ings] Enter a descriptive name for the cam era. [Auto Reboot Setup] Select Enable to activate automatic reboot and specify the tim e for reboot in the sub fields below. Day Interv al: Type the day interval between the reboots.
96 4.6.8 Language You can select the language for the Web interface. Figure 4-34 Use the Language drop-dow n list to select a language for the Web interface. By default, the language on the Web interface will be the same with the one used for the operating system.
Chapter 5 Ad v anced Appli cations This chapter introduces more advanced applications. 5.1 Upgrading System Firmw are GeoVision periodically updates the latest firmware to the comp any website. Y ou can update your camera firmware through the Web interface or GV -IP Dev ice Utility included in t he Software DVD.
5.1.1 Using the W eb Interface 1. In the Live View window, click the Show System Menu button (No. 8, Figure 3-2) and select Remote Config . This dialog box appears. F i g u r e 5 - 1 2. Click t he Bro wser button to loca te the fir mwa re fil e (.im g) save d at y our l ocal compu ter.
A dvanced Applications 5 5.1 .2 Us ing t he GV -IP Devi ce Util ity The GV -IP Device Utility provides a direct way to upgrade the firmware to multiple GV -Hybrid LPR Camera 20R / 10R / GV -IP LPR Ca mera 5R. Note the computer used to upgrade firmware must be under the same networ k with the cameras.
4. Click on the IP address of the camera and select Configure . This dialog box appears. F i g u r e 5 - 3 5. Click t he Firm ware Upg rade tab. This dialog box appears. Figure 5-4 5. Click t he Bro wse button to locate the firmware file (.img) saved at your local computer.
A dvanced Applications 5 6. If you like to upgrade all the GV-Hybrid LPR Cameras 20R / 10R / GV-IP LPR Camera 5R in the list, check Upgrade all devices .
5.2 Backing Up and Res toring Settings W ith the GV -IP Device Utility included on the Softw are DVD, you can back up the config urations in the GV -Hybrid LPR Camera 20R / 10R / GV -IP LPR Camera 5R, and restore the backup data to the c urrent unit or import it to another unit.
A dvanced Applications 5 To restore the setting s 1. In F igu re 5 -3, cl ick th e Import Settings tab. This dialog box appears . Figure 5-6 2. Click t he Bro wse button to locate the backup file (. dat). 3. Select Upgrade all devi ces to imp ort the settin gs in to the same typ e of d ev ice i n the same LAN.
5.3 Restoring t o Factor y Defau lt Settings T o restore the factory default settings, you can use the camera’ s Web interface or operate directl y on the ca mera .
A dvanced Applications 5 5.4 V erif ying W atermark The watermark is an encrypted and digital signature embedded in the video stream du ring the compression stage, protecting the video fr om the moment o f creation. W atermarking ensures that an image is not edite d or damaged after it is recorded.
106 5.4.3 The W a termark Proof Window 2 1 3 4 5 6 7 8 9 Figure 5-7 The controls in the window : No. Name Description 1 Open File Opens the recording. 2 First Fra me Goes to th e firs t frame of the fil e. 3 Play Plays t he f ile. 4 Previous Fr ame G oes to the previous fr ame of the file.
Chapter 6 DVR Configurations The GV -System provides hybrid solution, integrating t he digital videos from GV -Hybrid LPR Camera 20 R / 10 R / GV -IP LPR Camera 5R w ith other analog videos.
• The hardware compression and the “Pre-Recording Using RAM” feat ure cannot work on the videos from GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR Camera 5R. For details about the “Pre-Recording Using RAM” feature, see “System Configuration”, Chapter 1, DVR User’s Manual on the GV-NVR Software DVD.
DVR Configurations 6 6.1 Setting Up IP Cameras Follow the steps below to manually connect y our GV -Hybrid LPR Cam era 20R / 10R / GV -I P LPR Camera 5R to GV -Sy stem. Note: The following instructions are based on V8.5.7.0 so ftware and user interfaces.
3. Type the IP address, username and pas sword of the camera. M odify the default HTTP port if necessary. Figure 6-4 4. Select GeoV ision fr om the Brand drop-down list and select GV-I PLPR_CA M10 / GV-IPLPR_C AM 5 fr om the Device drop-down list. This dialog box appears.
DVR Configurations 6 Codec type: The live vi ew codec and resolution settings are displayed here. Resolution: Select resolutions for preview and recording. 5. Click A pply . The camera is added to the list. 6. Click th e listed camera, select Disp lay po sition a nd select a channel number to map the camera to a channel on the GV-System.
6.1.1 Customizing Camera Settings After the GV -Hybrid LPR Camera 20R / 10R / GV -IP LPR Came ra 5R is connected and assigned with a display channel, you can con figure the camera’ s settings s uch as frame rate, codec type and resolution.
DVR Configurations 6 GIS Se ttin g: Records the v ideo with the GPS data. To record the GPS data, remember to also enable the GIS function of the GV-System (Configure button < Accessories < Enable Local GIS).
6.2 Remote Monitorin g with Multi View Y ou can monitor the live view of the GV -Hybrid LPR Camera 20R / 10R / GV -IP LPR Came ra 5R using the Multi V iew .
DVR Configurations 6 6. Select GV-IP C amera, GV-IP S peed D ome from the Device drop-down list. Type the host name, IP address, user name and passw ord of the camera. Modify the d efault VSS port 10000 if necessary. Figure 6-8 7. Click Save to establish connection.
6.3 Remote Monit oring w ith E-Map Y ou can use the Remote E-Map to monitor the GV -Hybrid LPR Camer a 20R / 10R / GV -I P LPR Camera 5R. Creating an E-Ma p for the Camera W ith the E-Map Editor, you can create an E-Map for the camera. The E-Map Editor is available in the two applications: Main System and E-Map Server.
DVR Configurations 11 7 6 Connecting to the Camera Depending on where you sav e the created E-Map file (GV-System, E-Map Server or Control Center), the steps to open the Remote E-Map w indow for monitoring may vary slightly. The following is the connection example when you store the E-M ap file in the GV-System.
Chapter 7 CMS Configurations This section introduces the relat ed settings t o enable connect ing to the GV - Hybrid LPR Camera 20R / 10R / GV -IP LPR Camera 5R in the central monitor ing stati ons Center V2 and VSM and Dispatch Server . 7.1 Center V2 The Center V2 can monitor the GV -Hybrid LPR Camera 20R / 10R / GV - IP LPR Camera 5R.
CMS Configurations 7 ¾ T o define how to display the received video on motion detection, click the Preference Setting s button and sele ct System Configure . This dialog box appears. Figure 7-3 M anual close channel: Closes the triggered camera view manually.
7.2 VSM The VSM can monitor the GV -Hybrid LPR Camera 20R / 10R / GV -IP LPR Camera 5R. TCP/ IP VSM Text Data GV-Hybrid LPR Camera 20 R / 10R / GV-IP LP R Camera 5R GV-Hybrid LPR Camera 20 R / 10R / G.
CMS Configurations 121 7 7.3 Disp a tch Server The Dispatch Server can manage the GV -Hybrid LPR Camera 20R / 10R / GV -IP LPR Camera 5R, and distribute them to the Center V2.
Chapter 8 Smart Device Connection Using Android or Apple smart devices, you can receive liv e video streaming from the GV -Hybrid LPR Cam era 20R / 10R / GV -I P LPR Camera 5R. The charts below list the GV mobile applications supporting the GV - Hybrid LPR Camera 20R / 10R / GV -I P LPR Camera 5R.
Smart Devic e Connectio n 8 8.1 Android Download GV -Eye fr om Android Mark et and install the application. The GV -Eye icon will appear on the desktop. Figure 8-1 8.1.1 Connecting to the Camera T o connect your Android dev ices to the GV -Hybrid LPR Camera 20R / 10R / GV -IP LPR Camera 5R, follow the steps below .
3. T ype the IP add ress, port number (default value is 10000), ID and passwor d of the camera y ou want to access. F i g u r e 8 - 3 4. Click Save t o add the ca mera.
Smart Devic e Connectio n 8 5. In the address boo k, tap the desired ca mera to access the live v iew . Figure 8-5 125.
8.1.2 A ccessing Live V i ew Y ou can press the M enu button on the mobile phone to see or hide the con nection informa tio n. Motion Detect ed I/O Triggered Motion Detected Figure 8-6 The following function buttons are available: Icon Name Function Channel number Switches to a different channel.
Smart Devic e Connectio n 8 Icon Name Function Audio Enables or disables the audio funct ion. G.711 and G.723 audio codec are supported. PTZ Control Enables the P TZ function. A message will appear askin g i f you w ant to use Ges ture Detec to r to con t rol PTZ.
8.2 Apple Download GV -Eye / HD from App S tore and install the application. The GV -Eye / GV -Ey eHD icon will appear on the desktop. GV -Eye icon on iPnone / iPod T ouch GV -Eye HD icon on iPad Figu.
Smart Devic e Connectio n 8 8.2.1 Connecting to the Camera T o connect your iPhone, iPod T ouch or iPad to the GV -Hybrid LPR Camera 20R / 10R / GV -I P LPR Camera 5R, follow the steps below . 1. Click the GV-Ey e icon on your phone. The welcome page appears.
8.2.2 A ccessing Live V i ew You can tap the information button at the top-right corner to see the connection informa tio n. Figure 8-10 The buttons below are available when the iPhone, iPod Touch or iPad is p ositioned vertically.
Smart Devic e Connectio n 131 8 Icon Name Function Stream change Switch the liv e view streams. Audio Enables or disables t he one-way audio function. G. 711 and G.723 audio codec are supported. Note: The PTZ con trol and I/O device functions are only accessible on dev ices with PTZ control and I/O devices.
S pecifications GV -H ybrid LPR Camera 20R / 1 0R Camera Image Sensor 1/3’’ B/W progressive scan CMOS Picture Elements 1280 (H) x 1024 (V) Shutte r S peed Automatic, Manual (1/500 ~ 1/8000 sec) White B alanc e Auto / Manual (2800K ~ 8500K) S/N Ratio 50 dB Max.
Spec ifications Opera tion A udio Compressi on G.711, AAC (Optional) A udio Support Two-way audio V ideo Resoluti on 4:3 1280 x 960, 640 x 480, 3 20 x 240 16.9 1280 x 720, 640 x 360, 4 48 x 252 Main S tream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16.
Genera l Operating T emperature -40°C ~ 50°C ( -40°F ~ 1 22°F) Humidit y 10% ~ 90% (non-condensing) Power Source PoE (IEEE802. 3at) Max. Power Consumption 48 W 10R 317.5 x 108.5 x 230.57 mm (12.5 x 4.27 x 9.08 ”) (with mounting base) Camera Body 20R 317.
Spec ifications 135 A ppli cations Network Storage GV-NVR, GV-System , GV-Recording Server Smart Device A ccess - G V-Eye for Android Smartphone, Tablet, iPhone and iPod Touch - GV-Eye HD for iPad Liv.
GV -IP LPR Cam era 5R Camera Image Sensor 1/3’’ progressive scan CM OS Picture Elements 1280 (H) x 1024 (V) Shutte r S peed Automatic, Manual (1/500 ~ 1/8000 sec) White B alanc e Auto / Manual (2800K ~ 8500K) S/N Ratio 50 dB Max. Speed 60 km/h (37 m ph) Lens Megapixel 1.
Spec ifications V ideo Resoluti on 4:3 1280 x 960, 640 x 480, 3 20 x 240 16.9 1280 x 720, 640 x 360, 4 48 x 252 Main S tream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16.
138 Genera l Ingress Protection IP67 V andal Resistance IK10 for metal casing Fan Constantly On Regulatory CE, FCC, C-Tick, RoHS compliant Power over Ethernet PoE S t andard IEEE 802.3at Power over Ethernet / PD PoE Power Supply T yp e End-Span PoE Power Output DC 48 V, 345mA (16.
A ppendix A . The C GI Comman d W ith GV -Hybrid LPR Camera 20R / 10R, you can obtain a snap shot of the live view or access the User Account Web interface simply by executing CGI commands. For a GV -Hybrid LPR Camera 10R with the following details: IP address: 192.
B. RTSP Protocol Suppor t The GV -Hybrid LPR Camera 20R / 10R supports R T SP protocol for both video and audio streaming. For RTSP command, enter: rtsp://<IP of the GV -Hybrid LP R Cam era 10R:8554/<CH No.>.sdp For example, rtsp:// 192.168.3.
A ppendix 141 C. Settings for I nternet Ex plorer 8 or later If you use Internet Explorer 8 or later , it is required to complete the following setting. 1. S et the Secu rity to Med ium-h igh (d efau lt) . 2. Enable Allow previously unused ActiveX controls to run w ithout prompt .
デバイスGeovision GV-HYBRIDLPRの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Geovision GV-HYBRIDLPRをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGeovision GV-HYBRIDLPRの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Geovision GV-HYBRIDLPRの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Geovision GV-HYBRIDLPRで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Geovision GV-HYBRIDLPRを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGeovision GV-HYBRIDLPRの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Geovision GV-HYBRIDLPRに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGeovision GV-HYBRIDLPRデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。