Go-VideoメーカーDVR 4550の使用説明書/サービス説明書
ページ先へ移動 of 72
SSC.4540.0121801 D VR4550 USER’S GUIDE DVD+VCR COMBO.
Congratulations... ...on your purchase of this Go-Video DVD+VCR! We know you will enjoy this product for many years to come. In case warranty service is requir ed, please take a moment to attach your receipt to this manual and write down your Serial Number (located on the back panel of the DVD+VCR): __________________________________ .
i T able of Contents T ABLE OF CONTENTS Important Safety Instructions ............................................... iii 1 - GETTING ST AR TED 1 Unpacking ...................................................................... 1 Basic Connections ....
ii DVD+VCR User’ s Guide APPENDIX A - ADV ANCED CONNECTIONS 36 S-Video/Component Hookup ...................................... 36 Alt Video Out Setting ................................................... 37 A/V Receiver/Stereo Hookup ...............
iii Safety SAFETY 1. Read Instructions - All the safety and op- erating instructions should be read be- fore the pr oduct is operated. 2. Retain Instructions - The safety and oper - ating instructions should be retained for future r eference. 3. Heed W ar nings - All warnings on the product and in the operating instructions should be adhered to.
iv DVD+VCR User’ s Guide gard to pr oper grounding of the mast and supporting structure, gr ounding of the lead-in wire to an antenna dischar ge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electr odes, and requirements for the grounding electr ode.
1 1 - Getting Started 1 UNP ACK YOUR DVD+VCR As you unpack, please check that the following items are included in your DVD+VCR packing case: • DVD+VCR •W arranty Registration Card • User’ s Guide • Stereo A/V Cable • RF Coaxial Cable • Remote Control • 1.
2 DVD+VCR User’ s Guide 1 CONNECT ANTENNA/CABLE TV Connect the RF coaxial cable from your indoor/outdoor antenna or cable wall outlet to the IN (FROM ANT .
3 1 - Getting Started NOTES • If no channels were found in your ar ea, the DVD+VCR will alert you and then display the “Channel Setup” menu; see page 47. • If Auto Setup was unable to detect the time, the DVD+VCR will alert you and then display the “Set Month” menu; see page 45.
4 DVD+VCR User’ s Guide REMOTE CONTROL SETUP Follow these steps to pr ogram the remote control to operate many brands of television. 1 TURN ON TELEVISION Press POWER on your television.
5 2 - Quick T our SYSTEM/DECK SELECT KEYS POWER Press to power the DVD+VCR on and of f. DVD Press to set the r emote control to operate the DVD deck. VCR Press to set the r emote control to operate the VCR deck. TV Press to set the r emote control to operate your TV (optional); see page 4.
6 DVD+VCR User’ s Guide 12 3 456 78 9 0 100+ VOL CH SHUTTLE 3D SOUND TV/VCR TRK– AUTO TRK+ DISC MENU REC TITLE SUBTITLE AUDIO MARK SP/SLP SET TIMER RETURN SEARCH/INDEX POWER OPEN/CLOSE SETUP /ENTER ZOOM MODE REPEA T SKIP F.
7 2 - Quick T our 12 3 456 78 9 0 100+ VOL CH SHUTTLE 3D SOUND TV/VCR TRK– AUTO TRK+ DISC MENU REC TITLE SUBTITLE AUDIO MARK SP/SLP SET TIMER RETURN SEARCH/INDEX POWER OPEN/CLOSE SETUP /ENTER ZOOM MODE REPEA T SKIP F.
8 DVD+VCR User’ s Guide 1 DVD DECK Deck used for DVD/CD playback and other DVD functions. 2 DVD OPEN/CLOSE Press to open and close the DVD disc drawer . 3 VCR DECK Deck used for VCR playback and other VCR functions. 4 RECORD Press to start r ecording in the VCR deck.
9 2 - Quick T our 12 3 4 5 6 7 8 1 COPY Press to copy a DVD in the DVD deck to a VHS tape in the VCR deck. Note: The DVD+VCR will not copy Macrovision ® encoded DVDs. 2 CHANNEL +/– Press to select the next or pr evious channel. 3 SETUP Press to display the DVD+VCR “Setup Menu.
10 DVD+VCR User’ s Guide 1 DVD DECK INDICATOR The DVD deck is active. 2 DISC TYPE INDICATOR A DVD, CD, VCD or SVCD is loaded. 3 LPCM INDICATOR A disc with LPCM (Linear Pulse Code Modulation), such as an audio CD, is loaded. 4 DOLBY DIGITAL INDICATOR A DVD with a Dolby Digital 5.
11 2 - Quick T our REAR P ANEL The following is an overview of the DVD+VCR rear panel. 1 23 5 46 7 8 9 1 0 1 RF ANTENNA INPUT Connect to your antenna, cable TV , or cable box with an RF coaxial cable. 2 RF OUT TO TV Connect to your television with an RF coaxial cable.
12 DVD+VCR User’ s Guide BASIC DVD PLA YBACK 1 OPEN DISC DRAWER Press OPEN/CLOSE to automatically power on the DVD+VCR and open the disc drawer . 2 INSERT DISC Place the disc in the drawer with the label side facing up. If the disc has two sides, orient the disc with the desired label facing up.
13 3 - Basic Operations BASIC VCR PLA YBACK 1 INSERT VHS TAPE Insert a standard VHS videotape into the VCR deck. The DVD+VCR will power on automatically when you insert the tape. 2 PLA Y TAPE Press PLA Y/P AUSE . • If the tape is missing the Record Safety T ab and Auto Play is turned on, the tape will begin playing automatically , see page 49.
14 DVD+VCR User’ s Guide MENU NA VIGA TION The following keys are used to open and navigate through the DVD+VCR on-scr een menu system. SETUP/ENTER KEY Press to access the DVD+VCR on-scr een menu system. UP ARROW KEY Moves pointer up the list of menu items.
15 4 - Special DVD Features 4 SPECIAL DVD FEA TURES This Chapter explains some of the special features of DVD/CD/VCD playback. TITLE/CHAPTER/TIME SELECTION 1 VIEW DVD/CD DISPLA Y Press DISPLA Y during DVD/CD playback.
16 DVD+VCR User’ s Guide ANGLE/ZOOM press LCV ANGLE press ZOOM Follow these instructions to view a DVD movie from multiple angles, or to zoom in during playback. ANGLE Some DVDs allow you to view the same scene from dif ferent perspectives, or angles, while watching a movie.
17 4 - Special DVD Features SUBTITLES/AUDIO/3D SOUND SUBTITLES Many DVDs provide subtitles in one or mor e languages. The SUBTITLE key provides a shortcut to view and select from all available subtitle languages on the disc. 1 While playing a DVD, press SUBTITLE.
18 DVD+VCR User’ s Guide REPEA T FEA TURES Follow these steps to repeat a chapter , title, or segment (A-B Repeat) of a DVD or CD. REPEA T CHAPTER/TITLE Y ou can repeat a single chapter or track over and over , or you can repeat a complete title of a DVD.
19 4 - Special DVD Features press MARK BOOKMARKS SET BOOKMARKS 1 While a DVD is playing, press MARK. The “Mark” header will appear on the screen. 2 Use the LEFT/RIGHT arrow keys to select one of the three bookmark placeholders (- - -). The selected placeholder will blink.
20 DVD+VCR User’ s Guide RANDOM PLA YBACK Random Playback sets a random order for playback of chapters/tracks on a DVD or CD. 1 While a DVD/CD is stopped, press MODE/REPEA T . 2 Use the UP/DOWN arrow keys to move the pointer to “Random Play ,” then press the RIGHT arr ow key to select.
21 4 - Special DVD Features MP3 PLA YBACK Follow these steps to playback MP3 files burned on a CD-R disc. 1 INSERT CD-R Insert a CD-R with MP3 files into the DVD deck.
22 DVD+VCR User’ s Guide 1 INSERT T APE Insert a VHS tape with a recor d safety tab into the VCR deck. 2 SET RECORD SPEED Press SP/SLP to set the r ecord speed to the following: • SP – Standar d Play , for best quality . • SLP – Super Long Play , for maximum r ecor ding time (3 times longer than SP).
23 5 - VCR Recording RECORD SETTINGS 1 OPEN “SETUP MENU” Press SETUP/ENTER. 2 SELECT “ VCR & CHANNEL SETUP” Use the UP/DOWN arrow keys to move the pointer to “VCR & Channel Setup,” then press the RIGHT arr ow key to select.
24 DVD+VCR User’ s Guide COPYING FROM DVD TO VHS The DVD+VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button. 1 INSERT DISC Insert the disc you wish to copy in the DVD deck and close the drawer . 2 INSERT VHS TAPE Insert a VHS tape with a recor d safety tab into the VCR deck.
25 6 - Timer Recording NOTE • If you select “Set Timer Recording” without having set the clock, the “Clock Settings” menu will appear . Y ou MUST set the clock before you can program a Timer Recording (see page 45). 1 INSERT TAPE Insert a blank tape with a r ecor d safety tab into the VCR deck.
26 DVD+VCR User’ s Guide 6 SET LENGTH Use the 0-9 keys to set the length of the event in hours and minutes. Set Length (H) Enter the hours as a 1-digit number; e.g., for one hour , press “1.” Set Length (M) Enter the minutes as a 2-digit number; e.
27 6 - Timer Recording SELECT EVENT [1-16] :01 / T o Move T o Select 1 10:30 PM On W ednesdays Ch10 1H30M Auto 2- - : - - - - - - - - - - / - - Ch - - - H - - M - - 3- - : - - - - - - - - - - / - - Ch - - - H - - M - - 4- - : - - - - - - - - - - / - - Ch - - - H - - M - - .
28 Dual-Deck VCR User’ s Guide press Select “VCR & Channel Setup” SETUP MENU Set Timer Recording Child Lock Off Set Clock DVD Setup VCR & Channel Setup Language/Langue/Idioma / T o Move .
29 7 - VCR Plus+ VCR PLUS+ WORKSHEET The following list contains many of the standar d VCR Plus+ channel numbers used in the US and Canada. The first group consists of Cable TV stations and the second group consists of Br oadcast TV stations. Use the spaces beside each channel to fill in the local channel for your viewing area.
30 DVD+VCR User’ s Guide NOTE • If you haven’ t set the clock, the Clock Settings menu (“Set Month”) will appear . Y ou must set the local time before you can pr ogram a VCR Plus+ Recording (see page 45). VCR PLUS+ RECORDING Follow these steps to program a VCR Plus+ r ecor ding.
31 7 - VCR Plus+ 2 - Mo-Fr The event will be recor ded weekdays only (Monday through Friday). 3 - W eekly The event will be recor ded once a week. 4 - Always The event will be recor ded every day . 7S E LECT “SET SPEED” Press the RIGHT arr ow key repeatedly until “Set Speed” appears in the menu header .
32 DVD+VCR User’ s Guide VCR PLUS+ TIMER EXTEND Follow these steps to extend VCR Plus+ recor ding a few minutes before and after the scheduled event.
33 8 - Search/Index SEARCH/INDEX This Chapter will show you how to locate recor dings on your VHS tapes using Index Marks. Follow these steps to place Index Marks on your recor dings. ABOUT INDEX MARKS What are Index Marks? Index Marks are like bookmarks on your videotapes.
34 DVD+VCR User’ s Guide INDEX SEARCH/SCAN 1 INSERT T APE Insert a videotape in the VCR deck. 2 OPEN “SEARCH MENU” While the tape is stopped or playing, press SEARCH/INDEX. 3 SELECT “INDEX SEARCH/SCAN” Use the UP/DOWN arrow keys to move the pointer to “Index Search/Scan,” then pr ess the RIGHT arrow key to select.
35 8 - Search/Index SPECIAL SEARCH OPTIONS 1 INSERT T APE Insert a VHS tape in the VCR deck. 2 OPEN “SEARCH MENU” While the tape is stopped or playing, press SEARCH/INDEX.
36 DVD+VCR User’ s Guide A ADV ANCED CONNECTIONS This Chapter will show you how to use the S-Video and Component V ideo outputs, as well as how to connect additional audio/video devices to your DVD+VCR. S-VIDEO/COMPONENT HOOKUP APPENDIX Follow these steps to connect the DVD+VCR to your TV using the S-Video or Component V ideo outputs.
37 Appendix A - Advanced Connections 1 OPEN “SETUP MENU” Press SETUP/ENTER. • Make sure the DVD deck is stopped before pr essing SETUP/ENTER. Y ou will not be able to enter the “DVD Setup” menu if a DVD is playing.
38 DVD+VCR User’ s Guide A/V RECEIVER/STEREO HOOKUP STEREO CONNECTION 1 CONNECT DVD+VCR TO STEREO Connect RCA cables from either of the ”Line Out” audio jacks (R and L) on the back of the DVD+VCR to the line inputs of your stereo r eceiver .
39 Appendix A - Advanced Connections If you connected the DVD+VCR to your A/V receiver with the Optical or Coaxial Digital Audio Out AND your A/V receiver is equipped with a Dolby Digital or DTS Decoder , you must enable the corr ect digital output in the menu system.
40 DVD+VCR User’ s Guide OTHER A/V HOOKUP Follow these steps to connect your DVD+VCR to an external audio/video component, such as a camcorder , video game, etc. 1 CONNECT DEVICE TO VCR Connect RCA cables fr om the audio/video outputs of your exter nal device to the audio/video inputs on the front (Line 1) or r ear (Line 2) of the DVD+VCR.
41 Appendix A - Advanced Connections 1 CONNECT CABLE TO CABLE BOX Connect an RF coaxial cable from your cable wall outlet to the Input jack on the Cable Box. 2 CONNECT CABLE BOX TO DVD+VCR Connect a second RF coaxial cable from the Output jack on the Cable Box to the “IN (FROM ANT .
42 DVD+VCR User’ s Guide AL TERNA TIVE CABLE BOX HOOKUP Follow these steps if you have a cable box and want to be able to watch a second channel while r ecor ding a TV program.
43 Appendix B - System Settings SYSTEM SETTINGS This Chapter will show you how to customize your DVD+VCR experience, with settings to adjust the language, time, channels, displays and mor e.
44 DVD+VCR User’ s Guide AUTO CLOCK SETTINGS NOTES • If “Auto Clock Set” is set to “Off,” then “Time Zone” and “Clock Set Channel” will not appear on the Clock Settings menu. • If the DVD+VCR sets your clock incorrectly , try adjusting “T ime Zone,” “Daylight Savings” and “Clock Set Channel.
45 Appendix B - System Settings If Auto Clock Set is not available in your area, follow these steps to set the clock manually (see note below before pr oceeding). 1 OPEN “SETUP MENU” Press SETUP/ENTER. 2 SELECT “SET CLOCK” Use the UP/DOWN arrow keys to move the pointer to “Set Clock,” then press the RIGHT arrow key to select.
46 DVD+VCR User’ s Guide DA YLIGHT SA VINGS TIME NOTES • If “Auto Clock Set” is set to “Off,” then “Time Zone” and “Clock Set Channel” will not appear on the “Clock Settings” menu. • If you are an Arizona r esident, set “Daylight Savings” to “Off” and set “Time Zone” to “Mountain” (see page 44).
47 Appendix B - System Settings Follow these steps to set all Channel Settings for your DVD+VCR. 1 OPEN “SETUP MENU” Press SETUP/ENTER. 2 SELECT “VCR & CHANNEL SETUP” Use the UP/DOWN arrow keys to move the pointer to “VCR & Channel Setup,” then press the RIGHT arr ow key to select.
48 DVD+VCR User’ s Guide CHILD LOCK 1 OPEN THE “SETUP MENU” Press SETUP/ENTER. 2 SELECT “CHILD LOCK” Use the UP/DOWN arrow keys to move the pointer to “Child Lock,” then press the RIGHT arrow key to select fr om the follow- ing: • Off - Child Lock is disabled.
49 Appendix B - System Settings Follow these steps to activate Auto Play (which plays tapes auto- matically when they are inserted) and Auto Rewind (which r ewinds tapes automatically when they are finished playing). 1 OPEN THE “SETUP MENU” Press SETUP/ENTER.
50 DVD+VCR User’ s Guide press SETUP MENU Set Timer Recording Child Lock Off Set Clock DVD Setup VCR & Channel Setup Language/Langue/Idioma / T o Move To Select RETURN to Quit Select “VCR &.
51 Appendix C - Advanced DVD Setup C APPENDIX TV ASPECT RA TIO Follow these steps to set the TV Aspect Ratio so the DVD player will display movies at the appropriate size for your television. 1 OPEN “SETUP MENU” Press SETUP/ENTER. • Make sure the DVD deck is stopped before pr essing SETUP/ENTER.
52 DVD+VCR User’ s Guide press DVD SETUP TV Aspect Ratio 4:3PS Language/Audio Setup Rating Control [None] Still Mode Auto Black Level [Low] Alt Video Out Off To Move / To Select RETURN to Go Back Se.
53 Appendix C - Advanced DVD Setup DYNAMIC COMPRESSION 1 OPEN “SETUP MENU” Press SETUP/ENTER. • Make sure the DVD deck is stopped before pr essing SETUP/ENTER.
54 DVD+VCR User’ s Guide RA TING CONTROL SETTINGS Follow these directions to set up a Rating Contr ol system to prohibit playback of certain DVD movies. 1 OPEN “SETUP MENU” Press SETUP/ENTER. • Make sure the DVD deck is stopped befor e pressing SETUP/ENTER.
55 Appendix C - Advanced DVD Setup CHANGING P ASSWORD Follow these instructions to set or change the rating control passwor d. Use 0-9 Keys CHANGE P ASSWORD Enter New Password ---- RETURN to Go Back U.
56 DVD+VCR User’ s Guide CHANGING RA TING LEVEL Follow these instructions to prohibit viewing of DVDs at or above a particular rating. 1 SELECT “CHANGE RA TING LEVEL” From the “Rating Contr ol” menu, use the UP/DOWN arrow keys move the pointer to “Change Rating Level,” then press the RIGHT arrow key to select.
57 Appendix C - Advanced DVD Setup STILL MODE/BLACK LEVEL Follow these steps to set Still Mode (the method used to freeze a single image) and Black Level (the r efer ence level for black in the video signal). 1 OPEN “SETUP MENU” Press SETUP/ENTER.
58 DVD+VCR User’ s Guide TROUBLESHOOTING HELP This Chapter provides customer support information, as well as a list of F AQs, technical specifications, the product warranty and a special featur e summary . The chart below will help you solve common challenges with your DVD+VCR.
59 Appendix D - Help Poor picture quality on VCR. • Set Channel Switch to channel 4. • Adjust tracking with AUTO and TRK –/+ keys. • Clean video heads with nonabrasive head cleaning tape. Remote not working. • Remove all obstacles and point directly at DVD+VCR.
60 DVD+VCR User’ s Guide TECHNICAL SPECIFICA TIONS The following are the technical specifications for your DVD+VCR. INPUTS AUDIO 2 Stereo audio inputs, RCA Connector , -8dbm, 47K Ω , front and rea.
61 Appendix D - Help W ARRANTY Who Provides the Limited W arranty During the warranty period, the Go-Video W arranty Administra- tor will honor DVD+VCR service for 90 days labor , 1 year parts from the original date of consumer pur chase. See below for Commercial, Industrial or Educational use coverage.
62 DVD+VCR User’ s Guide FEA TURE SUMMAR Y SYSTEM FEA TURES • Complete versatility to play DVDs, VCDs, audio CDs, CD-Rs or VHS T apes •W atch a DVD while recor ding a TV show with the VCR • Au.
63 Index INDEX INDEX Symbols 0-9 5, 6 100+ 5 16:9 Widescreen 51 3D Sound 6, 10, 17 4:3 Letterbox 51 4:3 Pan and Scan 51 A A-B Repeat 18 A/V Receiver 38 Add/Remove Channel 47 Alt Video Out 37 AM/PM 10,.
64 DVD+VCR User’ s Guide INDEX O One-T ouch Recording 22 Open/Close key 6, 7, 8 OTR 22 OTR Loop Record 22 Overlapping Events 27 P Password 55, 56 Play/Pause key 6, 7, 8 Playback DVD 12 VCR 13 PlusCo.
DVR4550 MENU SYSTEM SETUP MENU Set Timer Recording Child Lock Of f Set Clock DVD Setup VCR & Channel Setup Language/Langue/Idioma / T o Move To Select RETURN to Quit To Set RETURN to Quit To Move .
7835 East McClain Drive Scottsdale, AZ 85260 USA www .sonicblue.com.
デバイスGo-Video DVR 4550の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Go-Video DVR 4550をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGo-Video DVR 4550の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Go-Video DVR 4550の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Go-Video DVR 4550で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Go-Video DVR 4550を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGo-Video DVR 4550の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Go-Video DVR 4550に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGo-Video DVR 4550デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
