Amer NetworksメーカーC1110-32の使用説明書/サービス説明書
ページ先へ移動 of 17
Gigabit Ethernet Adapter User’s Guide Version 1.0 PN# 1907GA1200T6380 This User's Guide contains important inform ation regarding the installation of your adapter card.
Amer.com 7259 Bryan Dairy Road, Lar go, FL 33777 © Amer.com Corp., 1997-2002 All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Amer.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.
. Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected to. . Consult the dealer or an exp erienced radio/TV technician for help.
1 I NTRODUCTION Thank you for choosing the 10/100/1000Mbps Gigabit Ethernet Card for 32-bit PCI Bus-equipped perso nal computers. The 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card is ideal for spee.
2 Supports IEEE802.1Q VLAN tagging Supports 10/100/1000Mbps Auto-negotiation operation Full Duplex support for 10/100/1000M b/s data rates Auto MDI-II/MD I-X crossover f or all three speeds Built-in FIFO (8K/64K) buffers reduces overhead of memory transfers 802.
3 provides a straightforward up grade without wasting a company’s existing invest ment in hardware, software, an d trained pe rsonnel. The increased speed and extra bandwidth offered by Gigabit Ethe.
4 Fast Ethernet Tech nology The growing importance of LANs and the increasin g complexity of desktop computing applications ar e fueling the need for high perform ance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and im prove client/server response times.
5 U NPACKING AND I NSTALLATION This chapter provides unpacking and installation information for the 32-bit PCI 10/100/ 1000Mbps Gigabit Ethernet Card. Unpacking CAUTION: Under ordinary circumstances, .
6 z One 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card. z One Driver Diskette z This User’s Guide. If any item is found missing or damaged, please contact your local reseller for replacement . Installing the Gigabit Ethernet Card 1. Shut down the computer, unplugs its power cord, and remove the chassis cover.
7 5. Switch computer power on. If the BIOS section of your computer’s boot progr am is Plug-and-Play compliant, then at power-up the BIOS will automatically configure any newly installed the Gigabit Ethernet Card.
8 Software Installation Before you connect the 32-bit PCI 10/100/100 0Mbps Gigabit Ethernet Card to the network, you have to install the network driver fi rst.
9 LED I NDICATORS Two LED indicators: Link, Activity. Link Indicator This indicator lights green when the Gigabit Card is connects to 10/100/1000Mbps Gigabit Ethernet Network. Activity Indicator (ACT) This indicator blinking gr een will be transmitting or received data on the network.
10 T ECHNICAL S PECIFICATIONS General Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethe rnet IEEE 802.
11 Amer.com Warranty Policy Limited Lifetime Warrant y In the event of a defect in quality or workmanship, Amer.com will repair or replace any hardware product sold by Amer.
12 improperly installed or faulty software, or service by anyone other than an Amer.com Service Technician. If there is evidence that the failure was due to user negligence, Amer.com has the right to void this warranty and or charge normal service rates for the subject repair.
13 Limits and Expectati ons There are no express warranties except as listed above. Network products by Amer.com shall not be liable for incidental or consequential damages resulting from the use of this product. Any future upgrades, including (but not limited to) hardware and software are not covered by this limited warranty.
デバイスAmer Networks C1110-32の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Amer Networks C1110-32をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAmer Networks C1110-32の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Amer Networks C1110-32の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Amer Networks C1110-32で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Amer Networks C1110-32を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAmer Networks C1110-32の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Amer Networks C1110-32に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAmer Networks C1110-32デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。