Grandstream NetworksメーカーHT-286の使用説明書/サービス説明書
ページ先へ移動 of 28
Grandstream Networks, Inc. HT–286 Analog Telephone Adaptor HT–286 User Man ual www.grandstream.com Firmware Version 1.1.0.31 support@grandstream.com.
Grandstream Networks, Inc. HT–286 User Manual Page 2 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 T ABL E O F C ONTENTS HT-286 User Manual WELCOME.................. ................... ................... ................... .................. .....
Grandstream Networks, Inc. HT–286 User Manual Page 3 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 T ABL E OF T ABLES HT-2 86 Us er Man ua l T ABLE 1: D EFINIT IONS OF T HE HT–286 C ONNECTORS .... ................... ................... ...........
Grandstream Networks, Inc. HT–286 User Manual Page 4 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Welcome Congratulations on becoming an owner of HandyTone- 286.
Grandstream Networks, Inc. HT–286 User Manual Page 5 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Installation E QUIPMENT P ACKAGING The HT–286 ATA package contains: • One HT–2 86 Main C ase • One Universal Power Adaptor • One Ethernet Cable C ONNECTING Y OUR ATA The HT–286 is easy to configure .
Grandstream Networks, Inc. HT–286 User Manual Page 6 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 T HREE EASY STEPS TO I NSTALL THE HT–286 1. Connect a stan dard touch-to ne analog te lephone (or fax machine) to FXS port.
Grandstream Networks, Inc. HT–286 User Manual Page 7 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Product Overview HT-286 supports one FXS port for Internet data, voice, a nd fax. K EY F EATURES Ethernet Ports DHCP FXS Port PSTN Pass – through Voice Mail Indicator Voice Codec Remot e Configuration 1 RJ45 (LAN) Client 1 No Yes iLBC, G.
Grandstream Networks, Inc. HT–286 User Manual Page 8 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Provisioning and NAT support tra versal via STUN Fax over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switc h to G.711 for Fax Pass-through (pending), Fa x Datapump V.
Grandstream Networks, Inc. HT–286 User Manual Page 9 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Basic Operatio ns G ET F AMILIA R WITH V OICE P ROMPT HT–286 stores a voice prompt menu (Interactive Voice Response or IVR ) for quick browsing and simple configuration.
Grandstream Networks, Inc. HT–286 User Manual Page 10 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 47 “Direct IP Calling” Enter a 12 digit IP addr ess to make a direct IP call, after dial tone.
Grandstream Networks, Inc. HT–286 User Manual Page 11 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 D IRECT IP C ALLS Direct IP calling allows tw o parties with VoIP devices (e.g. a H T–286and another VoIP Device), to talk to each other in an ad hoc fashion without a SIP proxy.
Grandstream Networks, Inc. HT–286 User Manual Page 12 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 2. Attended Transfer: Assuming that call par t y A and B are in conversation.
Grandstream Networks, Inc. HT–286 User Manual Page 13 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Call Features The HT–286 supports all the traditional and ad vanced telephony features.
Grandstream Networks, Inc. HT–286 User Manual Page 14 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 T ABL E 7: HT–286 LED D EFINITIONS RED LED indicates not n ormal status Button fla shes every 1 seco nd If Ethe rnet link is down Button fla shes every 2 secon d s.
Grandstream Networks, Inc. HT–286 User Manual Page 15 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Configuration Guide C ONFIGURING HT–286 THROUGH V OICE P ROMPT DHCP Mode Select voice menu option 01 to enable HT–286 to use DHCP.
Grandstream Networks, Inc. HT–286 User Manual Page 16 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Only an administrator can access the “ ADVANCED SETTING ” configuration page. NOTE: If you canno t log into the configuration page by using de fault password, please check with the VoIP service provider.
Grandstream Networks, Inc. HT–286 User Manual Page 17 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Daylight Savings Time Controls whether displayed time is da ylight savings time or not. If set to “Yes” and the Optional Rule is empty, then the displayed time will be 1 hour ahead of normal time.
Grandstream Networks, Inc. HT–286 User Manual Page 18 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 NAT Mapped IP WAN side mapped IP if HandyTone-28 6 is connected to a NAT router. NAT Mapped Port W AN side mapped por t if HandyTone-286 is connected to a NAT router .
Grandstream Networks, Inc. HT–286 User Manual Page 19 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 iLBC frame size This defines the size of the iLBC cod ec frame. Th e de fault setting is 20ms. iLBC payload type This defines the iLBC payload type. The defa ult setting is 97.
Grandstream Networks, Inc. HT–286 User Manual Page 20 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Regi str atio n Expiration This parameter allows the user to specify the time frequ ency (in m inutes) th e phone will refresh its regis tration with the specif ied registrar.
Grandstream Networks, Inc. HT–286 User Manual Page 21 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 NAT T raver sal This parameter defines w hether the phone NAT traversal mechanism will be activated or not.
Grandstream Networks, Inc. HT–286 User Manual Page 22 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Caller ID Scheme Select the Caller ID Sc he me to suit the standa rd of dif f eren t area .
Grandstream Networks, Inc. HT–286 User Manual Page 23 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Syslog Level Select the ATA to report the log level.
Grandstream Networks, Inc. HT–286 User Manual Page 24 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Firm ware Up grade and Provisioning Default HTTP. Firm ware upgrading may take up to 10 minutes de pends on network environment. Do n ot interrupt the firmware upgrading pro cess.
Grandstream Networks, Inc. HT–286 User Manual Page 25 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 S AVING THE C ONFIGURATION C HANGES After making a change, click the “Update” bu tton in the Configuration page. The HT–2 86 will display a screen to confir ming changes.
Grandstream Networks, Inc. HT–286 User Manual Page 26 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Software Upgrade Software upgrade can b e done via either TFTP or HTTP. The corresponding con figuration settings ar e in the ADVANCED SETTINGS configu ration page .
Grandstream Networks, Inc. HT–286 User Manual Page 27 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 End users can also choose to download the fr ee HTTP server from http://httpd.
Grandstream Networks, Inc. HT–286 User Manual Page 28 of 28 Firmware 1.1.0.31 Last Updated: 1/2009 Restore Factory Default Setting WARNING! Restoring the Factory Def ault Setting w ill DELETE all configura tion information of the phone. Please BACKUP or PRINT out all the settings before you a pproach to following steps.
デバイスGrandstream Networks HT-286の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Grandstream Networks HT-286をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGrandstream Networks HT-286の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Grandstream Networks HT-286の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Grandstream Networks HT-286で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Grandstream Networks HT-286を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGrandstream Networks HT-286の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Grandstream Networks HT-286に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGrandstream Networks HT-286デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。