Grandstream NetworksメーカーHT502の使用説明書/サービス説明書
ページ先へ移動 of 32
HT502 User Manual www.grandstream.com Firmware Version 1.0.4.2 support@gran dstream.com Grandstream Networks, Inc. HT502 Dual FXS Port Analog Telephone Adaptor.
Grandstream Networks, Inc. HT-502 User Manual Page 2 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 T ABL E OF C ONTENTS HT502 User Manual WELCOME..................................................................................................
Grandstream Networks, Inc. HT-502 User Manual Page 3 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 T ABL E OF F IGURES HT502 U SER M ANUAL F IGURE 1: C ONNECTING THE HT502 .......................................................................
Grandstream Networks, Inc. HT-502 User Manual Page 4 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 W ELCOME Thank you for purchasing Grand stream’s HT502, the affordable, feature rich Analog Tel ephone Adaptor. Grandstream Han dyTone502 is a new addition to the pop ular HandyTon e ATA product family.
Grandstream Networks, Inc. HT-502 User Manual Page 5 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 C ONNECT YOUR HT502 Equipment Packaging The HT502 ATA package contains: • One HT502 Main Ca.
Grandstream Networks, Inc. HT-502 User Manual Page 6 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 T ABL E 1: D EFINITIONS OF THE HT502 C ONNECTORS Power Cable Power adapter connection WAN Port (RJ-45) Connect to the internal LAN network or router.
Grandstream Networks, Inc. HT-502 User Manual Page 7 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 P RODUCT O VERVIEW The HT502 is a full feature voice and fax-over IP device t hat offers a hi.
Grandstream Networks, Inc. HT-502 User Manual Page 8 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 DTMF Method Flexible DTMF transmission method, user i n terface of In-audio, RFC2833, and/or .
Grandstream Networks, Inc. HT-502 User Manual Page 9 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 B ASIC O PERATIONS Understanding HT502 Voice Prompt HT502 has a built-in voic e prompt menu for simpl e device configuration. The IVR menu and the LED button work with any of the FXS port.
Grandstream Networks, Inc. HT-502 User Manual Page 10 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 99 “RESET” Press “ 9 ” to reboot the device Enter MAC address to restor e factory de.
Grandstream Networks, Inc. HT-502 User Manual Page 11 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 Using Star Code 1. Pick up the analog phone then dial “ *47 ” 2. Enter the target IP address. Note: NO dial tone will be played betwee n step 1 an d 2.
Grandstream Networks, Inc. HT-502 User Manual Page 12 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 Note: continuous bu sy tone does not indicate the transfer ha s been successful, nor does i t indicate the transfer has failed. It often means there was a failure to receive second NOTIFY – check firmware for most recent release.
Grandstream Networks, Inc. HT-502 User Manual Page 13 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 C ALL F EATURES The HT502 supports all the tradition al and advanced telephony feature s.
Grandstream Networks, Inc. HT-502 User Manual Page 14 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 C ONFIGURATI ON G UIDE Configuring the HT502 th rough Voice Prompts DHCP M ODE Select voice menu option 01 to enable HT502 to use DHCP.
Grandstream Networks, Inc. HT-502 User Manual Page 15 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 Configuring the HT502 Via Web Browser HT502 has an embedd ed Web serv er that will respond to HTTP GET/POST reque sts.
Grandstream Networks, Inc. HT-502 User Manual Page 16 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 NOTE: If you can not log into the configuration page by using the default password, please check with the VoIP service provider.
Grandstream Networks, Inc. HT-502 User Manual Page 17 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 T ABL E 7: B ASIC S ETTI NGS End User Pass word Password to access the Web Configuration Menu. T his field is case sens itive with a maximum length of 25 characters.
Grandstream Networks, Inc. HT-502 User Manual Page 18 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 NAT TCP Timeout NAT TCP idle timeout in seco nds. Connection will be closed after prec onfigured, timeout if not refreshed. Range: 0 - 3600 NAT UDP Timeout NAT TCP idle timeout in seconds.
Grandstream Networks, Inc. HT-502 User Manual Page 19 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 Port Forwarding Forwards a matching (TCP/UDP) port to a specific LAN IP address with a specific (TCP/UDP) port.
Grandstream Networks, Inc. HT-502 User Manual Page 20 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 Port Status Displays relevant information regardin g the each FXS port.
Grandstream Networks, Inc. HT-502 User Manual Page 21 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 V ia TFTP Serve r This is the IP address of the c onfigured TFTP server. If selected and it is non-zero or not blank, the HT502 retrieves the ne w configuration file or new code image from the specified TFTP server at boot time.
Grandstream Networks, Inc. HT-502 User Manual Page 22 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 Firmware Key Used for firmware encryption. Should b e 32 digit in hexade cimal repr esentation. End user should keep it blank. SSL Certificate The user specify SSL certificate us ed for SIP over T LS in X.
Grandstream Networks, Inc. HT-502 User Manual Page 23 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 Syslog Lev el Select the HT502 to report the log level. De fault is NONE . The level is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events: 1.
Grandstream Networks, Inc. HT-502 User Manual Page 24 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 DNS Mode One from the 3 modes are availabl e for “DNS Mode” config uratio n: -A Record (.
Grandstream Networks, Inc. HT-502 User Manual Page 25 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 SIP T1 Timeout T1 is an estimate of the round-trip tim e between the client and server transactions. If the network latency is high, select larger value for more re liable usage.
Grandstream Networks, Inc. HT-502 User Manual Page 26 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 seconds have elapsed if the user forget s to press the “Re-Di al” button. The “Yes” option should be used ONLY if t here is a SIP proxy co nfigured and the proxy server supports 484 Incomplete Address response.
Grandstream Networks, Inc. HT-502 User Manual Page 27 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 Anonymous Call Rejection Default is No . If set to Yes, incoming calls with anonymous Caller ID will be rejected with 486 Busy message. Special Feature Default is Standard .
Grandstream Networks, Inc. HT-502 User Manual Page 28 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 V AD Default is No . VAD allows detecting the abs ence of audio and c onserve band width by preventing the transmission of "silent packets " over the network.
Grandstream Networks, Inc. HT-502 User Manual Page 29 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 Saving the Configuration Changes Click the “Update” button in the C onfigu ration page to save the chang es to the HT502 configuratio n. The following screen confirm s that the changes are saved.
Grandstream Networks, Inc. HT-502 User Manual Page 30 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 S OFTWARE U PGRADE Software upgrade can be done via either TFTP or HTTP. The correspondin g configuration settings are in the ADVANCED SETTINGS configuration page.
Grandstream Networks, Inc. HT-502 User Manual Page 31 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 3. Please go to File -> Configure -> Security to change the TFTP server's default setting from "Receive Only" to "T ransmit Only" for the firmware upgrade.
Grandstream Networks, Inc. HT-502 User Manual Page 32 of 32 Firmware Version 1.0. 4.2 Last Updated: 06/2011 R ESTORE F ACTORY D EFAULT S ETTING WARNING! Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before y ou approach to fo llowing steps.
デバイスGrandstream Networks HT502の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Grandstream Networks HT502をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGrandstream Networks HT502の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Grandstream Networks HT502の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Grandstream Networks HT502で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Grandstream Networks HT502を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGrandstream Networks HT502の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Grandstream Networks HT502に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGrandstream Networks HT502デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。