GrizzlyメーカーG8692の使用説明書/サービス説明書
ページ先へ移動 of 35
PORTABLE BANDSAW AND STAND MODEL G8692 INSTRUCTION MANUAL COPYRIGHT © AUGUST 2003 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
Table Of Contents SECTION 1: SAFETY ........................................................................................................................3 Additional Safety for Bandsaws ..............................................................
G8692 Portable Bandsaw and Stand -3- Safety Instructions For Metalworking Machines 5. KEEP CHILDREN AND VISITORS AWAY . All children and visitors should be kept at a safe distance from work area. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.
-4- G8692 Portable Bandsaw and Stand 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate.
G8692 Portable Bandsaw and Stand -5- Additional Safety for Bandsaws 8. MAKE ALL ADJUSTMENTS WITH THE POWER OFF . 9. DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE MAK- ING REPAIRS . 10. ALL INSPECTIONS, ADJUSTMENTS, AND MAINTENANCE MUST BE DONE WITH THE POWER OFF and the circuit breaker shut off.
-6- G8692 Portable Bandsaw and Stand Grizzly Industrial, Inc. is proud to offer the Model G8692 Portable Bandsaw and Stand. This band- saw is part of Grizzly’s growing family of fine met- alworking machinery.
G8692 Portable Bandsaw and Stand -7- Be sure that your particular electrical config- uration complies with local and state codes. The best way to ensure compliance is to check with your local municipality or a licensed electrician.
-8- G8692 Portable Bandsaw and Stand We have covered some basic electrical requirements for the safe operation of your bandsaw. These requirements are not nec- essarily comprehensive. You must be sure that your particular electrical configuration complies with local and state codes.
G8692 Portable Bandsaw and Stand -9- 1. Motor Brush Housing 2. Work Stand Mounting Brace 3. Blade Tension Lever 4. Locking Chain 5. Vise 6. Quick Nut 7. Hand Crank 8. Blade 9. Hi/Low Speed Switch 10. Power Cord 11. Safety button 12 . Trigger Figure 1.
-10- G8692 Portable Bandsaw and Stand After all the parts have been removed from the crate, you should have: 1. Portable bandsaw (not shown) 2. Bandsaw bench stand with vise (not shown) 3. 4 Rubber work stand feet 4. Removable handle 5. 4 M6-1.0 x 25 mm Phillips head screws 6.
G8692 Portable Bandsaw and Stand -11- 5mm 10mm 15mm 20mm 25mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm Washer Lock Washer Hex Nut Wing Nut Phillips Head Sheet Metal Screw Setscrew Phillips He.
-12- G8692 Portable Bandsaw and Stand 1. Workbench Load: The Model G8692 weighs 38 lbs and has a footprint of 10" x 18- 1 ⁄ 2 ". Most workbenches are suitable for your machine. If you are unsure that your work- bench could support the weight of the machine, additional build up to support the machine may be required.
G8692 Portable Bandsaw and Stand -13- The work stand requires the installation of four rubber feet to provide a stable, slip resistant base. To install the rubber feet to the stand: 1. Disconnect the bandsaw from the power source. 2. Turn the bandsaw stand on its side to access the threaded holes as shown in Figure 3 .
-14- G8692 Portable Bandsaw and Stand Figure 5. Attaching blade guide. Blade Guide Installation To install the blade guide on your bandsaw. 1. Disconnect the bandsaw from the power source. 2. Position the blade guide over the threaded holes by the guide bearings.
G8692 Portable Bandsaw and Stand -15- NOTICE The following section was designed to give instructions on the basic operations of this machine. However, it is in no way compre- hensive of all of the machine’s applications. WE STRONGLY RECOMMEND that you read books, trade magazines, or get formal train- ing to maximize the potential of your machine.
-16- G8692 Portable Bandsaw and Stand Blade Speeds When using your bandsaw, always change to the blade speed recommended for the material to be cut. The Model G8692 has speeds of 190 feet per minute and 285 feet per minute. Figure 7. HI/LO switch. Never change blade speeds while the motor is running.
G8692 Portable Bandsaw and Stand -17- The blade travel and wheel rotation on the Model G8692 are indicated by a direction arrow on the top cover, shown in Figure 8 . Figure 8. Blade direction. Always operate the bandsaw with the blade traveling in same direction as arrow.
-18- G8692 Portable Bandsaw and Stand Blade Changes To remove the blade: 1. Unplug the bandsaw from the power source! 2. Remove the bandsaw from the work stand. 3. Release tension on the blade by turning the tension control handle to “ loose ” ( Figure 9 ).
G8692 Portable Bandsaw and Stand -19- Figure 12. Rear blade guide bearing. Figure 13. Quick nut. 10. Secure the blade guide bearings removed in step 5 . 11. Replace the back cover of the bandsaw. 12. Turn the blade tension lever back to “ TIGHT .” Using Table Vise To use the vise on your bandsaw table: 1.
-20- G8692 Portable Bandsaw and Stand Cleaning your machine will extend its life and produce better results. Important places of the Model G8692 to keep clean are the motor area, the blade, and the stand. Make sure these areas are free from oil and debris.
G8692 Portable Bandsaw and Stand -21- Motor Brushes The Model G8692 comes with 2 extra motor brushes to help prolong the life of the universal motor. To change the motor brushes: 1. Use a flat-head screw driver to remove the motor brush covers as shown in Figure 15 .
-22- G8692 Portable Bandsaw and Stand Maintenance Performed Approximate Hours Of Use Maintenance Log Date.
G8692 Portable Bandsaw and Stand -23- Tool steel bandsaw blades: MODEL TYPE WIDTH GAUGE TPI G9112 Raker 1 ⁄ 2 " 0.025 14 G9113 Raker 1 ⁄ 2 " 0.025 18 G9114 Raker 1 ⁄ 2 " 0.025 24 Bi-Metal Variable Pitch Bandsaw Blades MODEL TYPE WIDTH GAUGE TPI G9115 VP 1 ⁄ 2 " 0.
-24- G8692 Portable Bandsaw and Stand Troubleshooting Motor will not start. 1. Low voltage. 1. Check power line for proper voltage. 2. Open circuit in motor or loose 2. Inspect all lead connections on motor for loose or open connections. connections. Motor will not start; fuses or circuit 1.
G8692 Portable Bandsaw and Stand -25- Design Type .................................................................................................. Bench Model Overall Dimensions: Table ................................................................
-26- G8692 Portable Bandsaw and Stand.
G8692 Portable Bandsaw and Stand -27- REF PART # DESCRIPTION REF PART # DESCRIPTION 47 P8692047 RUBBER PIN 48 P8692048 HANDLE 49 PN06M HEX NUT M5-0.8 50 P8692050 REAR BLADE GUIDE 51 P625 BALL BEARING .
-28- G8692 Portable Bandsaw and Stand.
G8692 Portable Bandsaw and Stand -29- REF PART # DESCRIPTION 101 P8692101 RUBBER FEET 102 P8692102 BASE 103 P8692103 WORKING TABLE 104 PW01M FLAT WASHER 8MM 105 PLW04M LOCK WASHER 8MM 106 PB03M HEX BOLT M8-1.
-30- G8692 Portable Bandsaw and Stand Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
CUT ALONG DOTTED LINE ___Other__________________________________________________ 9. How many of your woodworking machines are Grizzly? _____________ 10.
TAPE ALONG EDGES--PLEASE DO NOT STAPLE FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here Name_____________________________.
.
Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! -OR- • SECURE ORDERING • ORDERS SHIPPED WITHIN 24 HOURS • E-MAIL RESPONSE WITHIN ONE HOUR Visit Our Website T oday And .
デバイスGrizzly G8692の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Grizzly G8692をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGrizzly G8692の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Grizzly G8692の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Grizzly G8692で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Grizzly G8692を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGrizzly G8692の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Grizzly G8692に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGrizzly G8692デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。