Haflerメーカー945の使用説明書/サービス説明書
ページ先へ移動 of 20
Series 945 Preamp/Tuner.
NOTICE - IMPORTANT SAFETY INFORMATION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
12. CLEANING The equipment should be cleaned only as detailed in the operating instructions. 13. OBJECT AND LIQUID ENTRY Care should be taken so that objects and/or liquids, such as cleaning fluids or beverages, are not spilled into the enclosure of the equipment.
TABLE OF CONTENTS PERFORMANCE SPECIFICATIONS ............................................................................................... 4 General Information ........................................................................................
PERFORMANCE SPECIFICATIONS LINE AMPLIFIER (Measured at Line Out) HEADPHONE AMPLIFIER TUNER SECTION-FM TUNER SECTION-AM GENERAL INFORMATION All specifications are for 20 Hz - 20 kHz unless specified otherwise.
REMOTE CONTROLS: Up/Down Volume, Up/Down Tuning, Preset Next, Preset ‘1 ‘, Preset ‘11’: Audio/ Video Input Selectors, Tape 1, Tape 2/EPL, Power, AM/FM Selector, Tone In, Mute.
, 16 15 16 15 RP P 14 14 P P 945 PREAMP/TUNER FRONT PANEL VIEW.
FRONT PANEL CALL-OUTS 1. POWER SWITCH 15. -lights amber when in READY mode. -lights green when in ON mode. 2. 3. INFRARED RECEIVER WINDOW MEMORY PRESETS (l-9) -press to store AM/FM stations l-9 into memory. (See #6) -press to recall AM/FM stations l-9 from memory.
LEFT CHANNEL VIDEO RECORD TAPE 1 A/V IN VIDEO IN SWITCHED AC LINE VOLTAGE LINE OUT +, ,+ M:%:R ,A, OUTLETS RATING OUT IN 3 2 1 3 1 1 ANTENNA -@@@@@@@@@@ @@@@@ BRACKET *@@@@Q@@@@ @ @@@@ RIGHT 1 O?JT It.
LEFI- CHANNEL VIDEO RECORD TAPE 1 A/V IN VIDEO IN LINE OUT +, ,+ Mtf?I::R +, SWITCHED AC LINE VOLTAGE OUTLETS RATING OUT IN 3 2 1 3 2 1 RIGHT I CHANNEL ObT Ikl Y I I A/V OUT CD FM ANT UNSWITCHED LINE .
PREAMP /TUNER REMOTE CONTROL 1. VOLUME -press left volume button for decreased volume. -press right volume button for increased volume. -pressing either volume button defeats MUTE. 2. TUNE -press left button to change tuner down in frequency. -press right button to change tuner up in frequency.
VlMo co rJv1 B I-- zc s i ti, B i -’ I7 */vs I L L--lr----J L--lr----J ] ] L--_-----___~f~~~~~~~lll L--_-----___~f~~~~~~~lll ; ; L-------- ---- ---------, , / ; r----------m-- ------- ~, , 1 5isE A .
ANTENNA CONNECTIONS INITIAL POWER- UP/MUTING SYSTEM AUDIO LINE LEVEL INPUTS AUDIO LINE LEVEL OUTPUTS VIDEO SWITCHING A simple "T" shaped dipole ribbon antenna has been provided for FM reception. Connect its leads to the rear panel terminals marked “FM 300 OHM”.
TAPE INPUTS and TAPE OUTPUTS The 945 incorporates two Tape Loops for use with audio tape decks or other input/output signal processors. Due to the great flexibility of connection and control, the Tape Loops are probably the most complicated portion of the 945 to understand and operate.
MUTE CONTROL VOLUME CONTROL AND VOLUME CONTROL INDICATOR BALANCE CONTROL MONO CONTROL HEADPHONE OUTPUT ~ The Headphone receptacle is a standard 1/4” stereo phone jack, with the tip of the plug as the left channel, the ring the right channel, and the barrel ground.
UP/DOWN TUNING and AUTO SELECTOR MEMORY PRESETS l-9 and +10 PRESET SHIFT (FRONT PANEL) MEMORY PRESET BUTTONS '1', ‘1 1', AND NEXT (REMOTE CONTROL) STORING STATIONS INTO MEMORY MONO CONTROL Pressing the left tuning button will change the station frequency down the band.
CIRCUIT DESCRIPTION REMOTE RECEIVER and CONTROL LOGIC AUDIO LINE LEVEL INPUT SELECTOR SYSTEM JFET BUFFER AND RECORD OUTPUT DRIVER VIDEO SWITCHING TAPE MONlTOR SWITCHING LINE AMPLIFIER TONE CONTROL SYSTEM MUTING SYSTEM The Remote Receiver circuitry decodes the infrared pulses received from the Remote Control via the front panel Infrared Receiver.
HEADPHONE AMPLIFIER AM/FM TUNER The Headphone Amplifier utilizes a separate special purpose operational amplifier to drive the high current demands of headphone operation. This provides the extra power necessary for driving difficult headphone loads, and leaves the main signal path uncompromised for signals to power amplifiers.
FM ANTENNA WARNING: The use of ground adaptors (with the ground tab or wire of the adaptor disconnected) will eliminate the safety feature of the grounded power cord. This safety feature is intended to reduce the risk of electric shock-should an internal fault in the equipment result in an electrically “live” chassis.
AM ANTENNA REMOTE CONTROL BATTERY REPLACEMENT CLEANING/ MAINTENANCE The loop antenna supplied will offer excellent reception in most situations. It is a directional antenna, requiring orientation perpendicular to the radio station’s transmitter.
デバイスHafler 945の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hafler 945をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHafler 945の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hafler 945の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hafler 945で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hafler 945を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHafler 945の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hafler 945に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHafler 945デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。