Haierメーカー1407の使用説明書/サービス説明書
ページ先へ移動 of 26
Please READ this manual carefully before operating the unit, and keep it for future reference. COLOR TV RECEIVER OWNER'S MANUAL The Owner`s Manual for the Follow Models: 21F9D-P , 21T9D-P ,21F9D,.
CONTENTS Before Operation Basic operation Warning and cautions ............................................................................2 Installation ...............................................................................................3 Aerial connection.
Warning and cautions 1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. 4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire.
Installation Aerial connection Battery installation Take of f the battery compartment cover. Place two AAA batteries, make sure that battery polarity matches with the +/- mark inside the battery compartment. 300 twin-lead cable Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .
Function buttons and external sockets Note: The cabinet and buttons of TV is only for reference. Rear panel of the TV set Antenna input EXT TV SCRAT T erminal Power switch Power indicator Sensor windo.
Buttons on the remote control Buttons and Descriptions Mute Button Press to conceal the sound of programs. Stand by Button Screen Display Button Swap function Button TV and AV Exchange Button T o exch.
POWER Switching on/ off the TV set In the following, the methods of using power switch and remote controller to switch on/off power supply for the TV set will be explained. Switching on/ off the TV set Switching on/ off the TV set 1 Please press the power switch to switch on AC power supply and the power indicator will light.
CH+ CH- VOL - VOL + MENU TUNE CH+ CH- VOL - VOL + MENU 1 2 3 4 5 6 7 8 9 0 Watching TV Watching TV program You can watch T V program in a preset channel.
SCAN SW AP Watching TV continued Swap function enables quick swap to the last watched program. Auto scan function enables automatic successive scanning of all the programs in memory with (each channel will last about 2 seconds).
CALL CH+ CH- VOL - VOL + MENU TUNE Searching channel This TV set has three methods to set the channels, which are respectively full automatic, semi automatic and manual fine tune. - In this section, how to use the remote control to set the channel is explained.
EXIT CH+ CH- VOL - VOL + MENU TUNE Searching channel Continued Semi-automatic search Semi-automatic search 1 Press the CH+/- buttons or PROGRAM NUMBER 0-9 buttons to choose desired channels I.E. channel 1 2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen.
CH+ CH- VOL - VOL + MENU TUNE CH+ CH- VOL - VOL + MENU Searching channel Continued Manual fine tune Manual fine tune 2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. 3 buttons to select " FINE TUNE".
CH+ CH- VOL - VOL + MENU TUNE CH+ CH- VOL - VOL + MENU Searching channel Continued Program skip Program skip The Program skip feature enables you to skip/hide programs that you do not wish to be displayed when using the CH+/- buttons. These channels will still be displayed by directly using the channel number buttons on the remote control.
CH+ CH- VOL - VOL + MENU PICTURE P.S TD Multiple picture modes How to select picture modes You can quickly select the desired picture mode from four preset modes and one customized mode. Convenient picture and so und control functions Press the P .STD button to select the desired picture quality.
CH+ CH- VOL - VOL + MENU FUNCTION CH+ CH- VOL - VOL + MENU PICTURE Black stretch and noise reduce Convenient picture and so und control functions Continued How to select BLACK STRETCH How to select NOISE REDUCE 1 Press the menu button , till the menu shown on the right display on the screen.
MUTE Convenient picture and so und control functions Continued MUTE Sound mute 1 Press the MUTE button on the remote control and "MUTE" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off.
CH+ CH- VOL - VOL + MENU TIME CH+ CH- VOL - VOL + MENU TIME On/off timer Clock setting Time functions Clock setting and timer on/off functions 1 Press the TIME button, and the TIME menu display on the screen.
CH+ CH- VOL - VOL + MENU TIME CH+ CH- VOL - VOL + MENU TIME Sleep timer and program preset Sleep timer REMIND PROG function The TV set have 18 sections option (each section has a time interval of 10 minutes) for sleep timer function (See right chart): 0 10 20 170 180 1 Press the TIME button, and the TIME menu display on the screen.
CH+ CH- VOL - VOL + MENU FUNCTION CH+ CH- VOL - VOL + MENU FUNCTION NO SIGNAL Set up function Screen saver and childlock functions How to start screen saver function When the BACKGROUD function is ON, the screen will turn automatically as shown "NO SIGNAL" of moving .
CH+ CH- VOL - VOL + MENU FUNCTION CH+ CH- VOL - VOL + MENU FUNCTION AVL and calendar functions Set up function Continued 1 Press the FUNCTION menu button till the FUNCTION menu , shown on the right display on the screen. 2 Press the CH+/- . button to select "A VL" 3 Press .
CH+ CH- VOL - VOL + MENU FUNCTION Select a language Set up function Continued Select a language 3 press the VOL-/+ buttons to select the desired language. Then all the items will be displayed in the selected language. 1 Press FUNCTION menu button till menu , shown on the right display on the screen.
CH+ CH- VOL - VOL + MENU CH+ CH- VOL - VOL + MENU CH+ CH- VOL - VOL + MENU Position exchange functions Exchange Exchange EXCHANGE PROGRAM 1 6 PROGRAM 2 9 EXCHANGE 1 Press the MENU button till the , EXCHANGE menu display on the screen. 2 Press the VOL / buttons or the PROGRAM NUMBER 0-9 buttons to set PROGRAM 1 T O 6.
Connecting the TV set to the other video and audio equipment Connecting to the other video and audio equipment Stereo T o video/audio input DVD, VCD and other reproducing equipment T o outside input E.
Troubleshooting guide T o assist in location possible faults use help guide below . BREAKDOWN PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Ensure that the power supply is connected to the TV set and turned on.
Specifications The design and specifications may be changed without notice. PAL, SECAM 2W not distortional 60W Picture tube Accessories Colour system Sound system Sound output power Power requirements.
01 0090506138B.
デバイスHaier 1407の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Haier 1407をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHaier 1407の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Haier 1407の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Haier 1407で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Haier 1407を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHaier 1407の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Haier 1407に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHaier 1407デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。