Hans Groheメーカー28110XX1の使用説明書/サービス説明書
ページ先へ移動 of 16
Raindance Allrounder 28110XX1 W all Outlet Adapter with Hose Connection 28108XX1 Installation Instructions / W arranty.
2 Raindance Allrounder 28110XX1 T echnical Data Max. flow rate of showerhead 2.5 gpm Determining the mounting height (X) The Allrounder should be mounted according to the preferences of the users.
3 Install the Allrounder with the Optional W all Outlet Adapter with Hose Connection 28108XX1 Roughing in If you are not using the 28108XX1 wall outlet adapter , go to page 9 . Install a properly anchored 1/2" NPT drop-eared ell, at least 2" behind the surface of the finished wall.
4 Installation W rap both ends of the brass nipple with T eflon tape. Screw it into the mounting piece. Screw the test nipple / mounting piece assembly into the drop-eared ell. T ighten with a 12 mm Allen wrench (not included). Position the mounting plate over the mounting piece.
5 Drill the holes with a 6 mm bit. Use extreme caution - do not drill into the water line. Install the anchors. Remove the long bottom mounting screw on the All- rounder . Replace with the shor ter screw included with the adapter . Seal the wall around the anchors with waterproof sealant.
6 Slide the handshower into the handshower holder . Guide the hose over the hose hook. Install the handshower Place a black rubber washer in one end of the hose. Screw this end to the wall outlet adapter . Place the screen washer in the other end of the hose.
7 Replacement Parts 28108001 1 check valve 94074000 2 screw 97598000 Check V alve Maintenance: Backflow preven- tion is provided by a check valve, which is integral to the wall outlet adapter .
8 Corner Mount Kit 28105XX0 Note: The corner mount kit is not for use with the 28108XX1 wall outlet adapter . Position the corner mount against the wall at the desired location. Mark the positions of the screw holes. Put the mount aside. Drill the holes using a 6 mm bit.
9 Install the 28110XX1 Allrounder Do not drill through the mounting plate. Put the mounting plate away in a safe location. Drill the holes, using a 6 mm bit. Place the mounting plate against the wall at the de- sired location. Mark the locations of the screw holes.
10 Place the Allrounder over the mounting bracket (1). T ighten the set screw (2). Install the handshower: Place a black rubber washer in one end of the hose. Connect this end of the hose to the wall outlet (not included). Place the screen washer in the other end of the hose.
11 Slide the handshower into the holder , until the holder grips it firmly . Guide the hose over the hose hook. Using the Allrounder T o adjust the handshower height: Pull or push the Allrounder to the desired position. T urn the knob to the front to make the Allrounder easier to move.
12 Change the spray modes Push the function lever until it is next to the name of the desired function. The Raindance has 3 spray modes. Limescale Removal The spray channels on the Raindance are protected by the Rubit!™ self-cleaning system.
13 Replacement parts 28110XX1 1 handshower 28518XX1 2 T echniflex hose 28276XX3 3 mounting plate 97609XX0 4 corner mount kit 28105000 (optional - not for use with wall outlet adapter) XX = color 00 = .
14 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
15 the product for use primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year , with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
デバイスHans Grohe 28110XX1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Hans Grohe 28110XX1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHans Grohe 28110XX1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hans Grohe 28110XX1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hans Grohe 28110XX1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hans Grohe 28110XX1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHans Grohe 28110XX1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hans Grohe 28110XX1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHans Grohe 28110XX1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
