Hans Groheメーカー38118XX1の使用説明書/サービス説明書
ページ先へ移動 of 16
Installation Instructions / W arranty Uno 38117XX1 Uno 38118XX1.
2 W all Mounted Single-Handle Lav Set with Base Plate 38117XX1 W all Mounted Single-Handle Lav Set 38118XX1 38117XX1 38118XX1 T echnical Data Max. flow rate: 2 .2 g p m Max. water pressure: 147 psi Recommended pressure: 14.7 - 72 psi T est pressure: 232 psi Max.
3 Installation with 38111181 rough manufactured before 03/2004 T urn the water off at the supply before beginning this installation. Remove the covers from the plaster shields (1). T rim the plaster shields so that they extend 1/16” out- side the surface of the finished wall (2).
4 Install the new cup washers and springs in the rough. Install the cartridge assembly . Installation with 38111181 rough manufactured after 04/2004 Remove the covers from the plaster shields. T rim the plaster shields so that they extend 1/16” outside the surface of the finished wall.
5 Install the cartridge and anti-twist device in the housing. Install the cup washers and springs in the rough. Install the cartridge assembly . Installation with all models: Push the handle over the cartridge stem. Tighten the handle screw with a 2 mm Allen wrench.
6 Model 38117XX1 only: Measure the distance between the wall surface and the end of the handle (x). If x is between 3 1/4” and 3 7/8”, select the two “A” sleeves (1 1/4”). If x is between 3 7/8” - 4 3/8”, select the two “B” sleeves (7/8”).
7 Connect the fixation nuts to the sleeves. Measure the distance from the rough to the outside surface of the finished wall (X) (1). Add 1” to X. Cut the threaded end of the spout so that it is X + 1” long (2). Push the baseplate against the wall (1).
8 Lightly lubricate the o-rings on the spout and handle escutcheons with the enclosed lubricant (1). Push the escutcheons onto the baseplate. W rap the threads on the spout with T eflon tape (1). Install the spout (2). Install the handle flange (3). T ighten the retaining nuts with the ser vice key .
9 Model 38118XX1 only: Measure the distance between the wall surface and the end of the handle (x). If x is between 3 1/4” and 3 7/8”, select the “A” sleeve (1 1/4”). If x is between 3 7/8” - 4 3/8”, select the “B” sleeve (7/8”). If x is greater than 4 3/8”, select the “C” sleeve (1/2”).
10 Push the sleeve / handle escutcheon assembly into place over the handle (1). T ighten it by rotating it clockwise (2). Push the flange over the handle. Push the sealing ring into the handle escutcheon (1). Install the handle escutcheon onto the sleeve (2).
11 Measure the distance from the rough to the outside surface of the finished wall (X) (1). Add 1” to X. Cut the threaded end of the spout so that it is X + 1” long (2). Install the spout escutcheon on the spout. Push the sealing ring into the spout escutcheon.
12 38117XX1 User Instructions Pivot the handle up to turn the water on, down to turn it off. Pivot the handle to the left for warmer water , to the right for cooler water .
13 1 flange 96908XX0 2 handle 10092XX0 3 escutcheon for handle 96912XX0 4 escutcheon for spout 96913XX0 5 baseplate 96914XX0 6 cartridge cpl. 96339000 7 aerator cpl.
14 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
15 including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year , with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS W ARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT P A Y FOR: A.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgrohe-USA.com US - Installation Instructions • Part No.
デバイスHans Grohe 38118XX1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Hans Grohe 38118XX1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHans Grohe 38118XX1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hans Grohe 38118XX1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hans Grohe 38118XX1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hans Grohe 38118XX1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHans Grohe 38118XX1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hans Grohe 38118XX1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHans Grohe 38118XX1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
