HattelandメーカーJH 10T08の使用説明書/サービス説明書
ページ先へ移動 of 54
User Manual MMC (ETX) Updated: 09 Mar 2007 Doc Id: INB100014-1 (Rev 19) For models (including different options): - A 1 , - A 2, - C1 , - C2 Slim User Manual JH 10T08 MMC - 10,4 inch Maritime Multi Co.
Copyright © 2007 Jakob Hatteland Display AS Aamsosen N-5578 Nedre V ats, Norway Information in this manual is copyrighted to the respective owners. All rights are reserved by Jakob Hatteland Display AS.
3 IND100206-9 INB100014-1 (Rev 19) Contents .................................................................................... 3 Contents of package .......................................................................... 5 General ...............
Contents 4 IND100206-9 INB100014-1 (Rev 19) T echnical Drawings ................................................................ 31 T echnical Drawings - JH 10T08 MMC .............................................. 3 2 Standard V ersion ...............
5 IND100207-1 INB100014-1 (Rev 19) Item Description Illustration Documentation/Drivers/Software CD(s) for factory installed components like mainboard, IDE, network etc. 1 pcs of Standard Power Cable. (European T ype F “Schuko” or US T ype B standard plug) Length 1.
6 INB100014-1 (Rev 19).
7 INB100014-1 (Rev 19) General.
8 Jakob Hatteland Display AS IND100077-1 INB100014-1 (Rev 19) General Introduction to Jakob Hatteland Display AS Founded in 1987, Jakob Hatteland Display (JHD) offers the widest range of type approved marine monitors, panel computers and type approved marine computers for the worldwide commercial, naval, yacht and cruise market.
9 Jakob Hatteland Display AS IND100077-1 INB100014-1 (Rev 19) General Approved Marine Panel Computers (MMC) - Series 1 The combination of the reliable design of the marine TFT -LCD modules, together w.
10 IND100077-19 INB100014-1 (Rev 19) General Basic Construction Maritime Multi Computers Back cov er/ chassis Basic Construction - Maritime Multi Computers Fron t frame TFT Displa y Glass ( or touchs .
1 1 INB100014-1 (Rev 19) IND100077-23 General TOUCH SCREEN This product is equipped with a Resistive Touch Screen: Manufacturer : ELO TouchSystems Touch Controller : 2210 Serial Controller P/N 055165-000 Driver Download : www.
12 INB100014-1 (Rev 19) IND1001 10-1 Introduction to Jakob Hatteland Display products with touchscreen We use both Resistive and Capacitive touchscreen solutions for our products. Please visit our website to nd your exact type number and then determine if it uses Resistive or Capacitive.
13 INB100014-1 (Rev 19) IND1001 10-3 T ouchscreen Up-2-date touchscreen drivers and documentation: Please visit the 3rd party website as indicated on the label. Y ou can also visit our website www .hatteland.com to view the full list of our models with touchscreen.
14 INB100014-1 (Rev 19).
15 INB100014-1 (Rev 19) Installation.
16 INB100014-1 (Rev 19) IND100078-10 Installation Installation and mounting 1 . Most of ou r products a re in tend ed for va r ious me thods o f ins tallat ion or mo untin g (pa nel moun ting , bra cke t mount ing , c eil ing/wall mou ntin g et c. ) ; for deta ils, pl eas e see th e rel e va nt mecha nical dra wings .
17 INB100014-1 (Rev 19) IND100078-10 General Installation Recommendations Installation Ergonomics 1 . Adju st the un it heigh t so that t he to p of the scre en is at or be low e ye l ev el. Y our e yes s hould look sl ightl y dow nw ards whe n viewin g the m idd le of the scr een.
18 INB100014-1 (Rev 19) IND100078-10 General Installation Recommendations Installation - The i mpa irment o f read-out from a d ispl ay scr een b y dir ect lig ht from la mps o r the s un m ust b e a vo ided. R ear win dows mu st be b lack ed out b y means o f roll er blin ds or V ene tian bl inds .
19 INB100014-1 (Rev 19) IND100078-10 General Installation Recommendations Installation Maximum Cable Length The R G B/D VI c able s hould ge nerall y be ke pt a s shor t as possib le to pro vide a hig h qual it y outpu t on the d ispla y .
20 INB100014-1 (Rev 19).
21 INB100014-1 (Rev 19) Operation.
22 INB100014-1 (Rev 19) IND100133-10 FRONT USB4 INPUT/OUTPUT : Supports any USB 2.0 (480Mbps) compliant peripherals. Drivers for most USB devices are useally included in operating system or on separate installation CD’s delivered with product. USB 1.
Physical Overview - MMC ETX 23 INB100014-1 (Rev 19) IND100133-10 PCI Slots 1&2: (Not available on all models!) Supports PCI (Short Length / Standard Prole) card in two available slots. These PCI cards are normally installed from factory or returned to factory for upgrading if needed.
Physical Overview - MMC ETX 24 INB100014-1 (Rev 19) IND100133-10 PS/2 Keyboard and PS/2 Mouse INPUTS: Connect the PS/2 keyboard cable to the PS/2 5P Connector (female) marked with KEYBOARD. Connect the PS/2 mouse cable to the PS/2 5P Connector (female) marked with MOUSE.
25 INB100014-1 (Rev 19) Specications.
26 INB100014-1 (Rev 19) IND100129-70 Specications - JH 10T08 MMC A P P R O V A L S & C E R T I F I C A T E S On front bezel: • Power On/Off (push button) • B rightness Control • Power LED Reset button Behind hatch: • USB 2.
27 INB100014-1 (Rev 19) IND100129-42 Specications - JH 15T05 MMC A P P R O V A L S & C E R T I F I C A T E S On front bezel: • Power On/Off (push button) • B rightness Control • Power LED, HD Led and Reset button Behind hatch: • USB 2.
28 INB100014-1 (Rev 19) IND100129-43 Specications - JH 19T02 MMC Accessories: • JH 19TSV : Sun visor * • JH 19TBRMMC-B1 : B racket* • T ouch Screen ** * Option: Standard or custom logo and color ** Option: Factory mounted * Option: See separate datasheet for bracket drawings.
29 INB100014-1 (Rev 19) IND100129-47 Specications - JH 23T02 MMC On front bezel: • Power On/Off (push button) • B rightness Control • Power LED and Reset button Behind hatch: • USB 2.
30 INB100014-1 (Rev 19).
31 INB100014-1 (Rev 19) T echnical Drawings.
32 INB100014-1 (Rev 19) IND100132-94 Standard V ersion Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) T echnical drawings (.DWG format) are found on our internet site: http://www.
33 INB100014-1 (Rev 19) IND100132-62 Standard V ersion Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) T echnical drawings (.DWG format) are found on our internet site: http://www.
34 INB100014-1 (Rev 19) IND100132-63 Standard V ersion Measurements shown in mm Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) T echnical drawings (.DWG format) are found on our internet site: http://www.
T echnical Drawings - JH 19T02 MMC 35 INB100014-1 (Rev 19) IND100132-63 Bracket V ersion Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) T echnical drawings (.DWG format) are found on our internet site: http://www.
36 INB100014-1 (Rev 19) IND100132-68 Standard V ersion Measurements shown in cm Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) T echnical drawings (.DWG format) are found on our internet site: http://www.
T echnical Drawings - JH 23T02 MMC 37 INB100014-1 (Rev 19) IND100132-68 Bracket V ersion Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) T echnical drawings (.DWG format) are found on our internet site: http://www.
38 INB100014-1 (Rev 19).
39 INB100014-1 (Rev 19) T echnical Drawings - Accessories.
40 IND100132-78 INB100014-1 (Rev 19) T echnical Drawings - Accessories MMC Bracket POS NUMBER DESCRIPTION SIZE 1 1 Suspension Bracket 2 6 Nylon W asher Microplastic 6mm 3 2 Flat W asher 6 mm 4 2 Shoul.
41 INB100014-1 (Rev 19) Appendixes.
42 IND100241-2 INB100014-1 (Rev 19) Appendix Pin Assignments - 5P PS/2 MOUSE Pin 1: Mouse Data Pin 3: Ground Pin 5: Mouse Clock Pin 2: Not Connected Pin 4: Vcc +5V Pin 6: Not Connected Pin Assignments.
Pin Assignments - Common Connectors 43 IND100241-2 INB100014-1 (Rev 19) Appendix Pin Assignments - 25P Parallel Pin 01 - STROBE This signal indicates to the printer that data at PD7..0 are valid. Pin 02 - DA T A0 Parallel data bus from PC board to printer .
44 IND100241-3 INB100014-1 (Rev 19) Appendix Pin Assignments - 9P Serial COM RS422 Pin 01 - N/C Not Connected Pin 02 - TX- T ransmit Data - Pin 03 - RX+ Receive Data + Pin 04 - N/C Not Connected Pin 0.
45 IND100077-8 INB100014-1 (Rev 19) Appendix Basic T rouble-shooting COMMON ERRORS: (This is a generic description of possible issues for a varity of products) If for some reason there should be somet.
Declaration of Conformity We, manufacturer Jakob Hatteland Display A/S Åmsosen, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HT STD (Series 1) and HD MMD, HT MMC (Series 2) products is in conformity with the following standards in accordance with the EMC Directive.
47 IND100077-14 INB100014-1 (Rev 19) Appendix Return of goods: (Applies not to warrenty/normal service/repair of products) Bef ore ret urning good s, pl ease contact y our s yste m su pplier b ef ore send ing an y thing d irectly to JHD .
48 IND100077-7 INB100014-1 (Rev 19) Appendix T erms The Hatteland Group - T erms Of Sale And Delivery: 1 ) APPLICA TI ON The terms of sale and deli ver y include the follow ing companie s: Autostore A.
49 IND100077-7 INB100014-1 (Rev 19) Appendix 1 1 ) R ESPONS IBLIT Y Seller under t ake to deliv er f aultless and f unctional c apable go ods acc ording to existing technic al speci c ations.
50 IND100077-7 INB100014-1 (Rev 19) Appendix INSTRUCTI ONS FOR TH E CONSI GNE E 1 ) CONTROL Control t he goods imm ediately by receipt. Examine the quantit y towards the invoice/packinglist /shipping documents. Look for out ward defect s on the pack ing which may indicate damage on or los s of contents.
51 IND100077-20 INB100014-1 (Rev 19) Appendix Notes General Notes: (For all products) - The unit is type approved according to EN60945 4 th , 4.4, equipment category b) protected from the weather . - Other type approvals applies for the different products.
52 IND100077-31 INB100014-1 (Rev 19) Appendix Notes Important BIOS Reset / No picture information Please note that when performing a “Load Optimized Defaults” or “Load Fail-Safe Defaults” comm.
53 Appendix IND100077-25 INB100014-1 (Rev 19) Rev . By Date Notes 1 SE 02 Sep 04 First release i nternet v ersion. P ro ducts cover ed, JH 1 5T0 5 and JH 1 9T02 2 SE 26 Oct 0 4 Added pi n assignmen ts for RS 422 and R S 48 5 3 SE 08 Nov 04 Updated import ant security information regard ing the Compact F lash Slo t.
Head ofce, Vats / Norway: Jakob Hatteland Display A S Åmsosen N-5578 Nedre V ats, Norway T el: +47 5276 3700 F ax: +47 5276 5444 Sales ofce, Oslo / Norway: Jakob Hatteland Display A S Gjerdrums.
デバイスHatteland JH 10T08の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Hatteland JH 10T08をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHatteland JH 10T08の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hatteland JH 10T08の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hatteland JH 10T08で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hatteland JH 10T08を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHatteland JH 10T08の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hatteland JH 10T08に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHatteland JH 10T08デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
