HauppaugeメーカーWinTV-USBの使用説明書/サービス説明書
ページ先へ移動 of 59
W inTV USB Installation and R eference Manual ® Hauppauge! ®.
W inTV -USB Installation and R eference Manual Copyright (c) Hauppauge Computer Works, Inc. 2000 Hauppauge Computer W orks, Inc. T elephone: 631-434-1600 91 Cabot Court Fax: 631-434-3198 Hauppauge, NY.
FCC Statement Radio Interference Statement: The WinTV USB have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful inter ference in a residen- tial installation.
T able of Contents WinTV -USB Installation and Reference Manual Revision 4.8 FCC Statement ........................................................................................ CE Statement...........................................................
Setting the number of frames per second captured ....................................3-3 P review Video ......................................................................................3-5 Using Audio with W inTV -Capture ........................
T rademarks: W inTV and the Hauppauge logo are registered trademarks of Hauppauge Computer W orks, Inc. Intercast and the Intercast logo are trademarks of Intel Corp. Microsoft is a registered trademark and Windows and the Microsoft logo are trademarks of Microsoft Corporation.
iv.
Introduction This manual covers all of the WinTV USB models: W inTV-USB W inTV-USB FM References to the WinTV USB apply to all models. The W indows98 driver for all of the WinTV USB models will be refer red to as the W inTV-USB driver , and the installation CD-ROM will be refer red to as the WinTV Installation CD-ROM .
.
Installing the WinTV USB N ote: DO NOT PLUG THE WinTV-USB into your PC until your PC has fully booted.. T o install W inTV USB under Windows 98 or 2000, you will follow these steps: ✓ Plug the W inT.
Contents of the WinTV -USB package. W inTV-USB or W inTV-USB-FM unit 1 meter audio cable - sound cable for connecting between the WinTV -USB and your sound card S-V ideo to composite adapter FM radio .
Then plug the WinTV -USB into one of the USB connectors on the back of your PC, not a USB hub or keyboard. Installing the driver under Windows98 or Windows2000 A fter the WinTV-USB is installed, the Add New Hardware Wizard will appear . Select Search for the best driver for your device (Recommended) .
N ote: Be sure to use the exact version of Windows 98 CD- ROM that is installed on your system. If you are using Windows98 SE, do not use a Windows98 Gold CD-ROM. Also if Plug-n-Play does not correctly load the driver, you may manually load the driver from the WinTV-USB CD-Rom.
T o connect the audio from your VCR or camcorder , use an 1/8” stereo minijack exten- sion cable (1/8” male minijacks on one end, and RCA onthe other end) and connect the “ Audio Output” RCA ” on the VCR or camcorder to the Audio Line In jack on the WinTV USB .
The V olumeControl application is started by clicking either : Start/P rograms/Accessories/Multimedia/V olumeContr ol or Start/P rograms/Accessories/Entertainment/V olumeContr ol or Double click the speaker icon in Systray Y ou should see Line-In balance as one of the selections.
2-1 The WinTV2000 Application Snapshot button F reeze Configure snapshot Software remote control Color/audio configuration Full screen TV Remov e toolbar Minimize Close Snapshot view er window - double clic k on each “thumbnail” to see image full size Current TV channel or video source Click y our right mouse button here to remo v e toolbars.
2-2 W inTV -USB Installation and R eference Manual P revious channel Dolby P roLogic On/Off * V olume level Channel indicator Mono / Stereo indicator TV image size T oolbar Video source selector Chann.
Running the WinTV application A fter installing the WinTV application from the WinTV USB Installation CD-ROM , you will see icons on your Windows background. Start W inTV32 by double clicking on its icon. Once the Application is initialized, you should see the RED light illuminate on the WinTV USB.
Y ou can modif y the channel names by single clicking on the channel, then clicking Edit . Change the channel name to the name that you would like to have dis- played in the 32 toolbar .
Y ou can capture images up to 1600x1200 pixels. T o reduce the effects of motion in the video image, but with lower image resolution, in the Fields Captured option choose 1 (Motion) .
F or best per formance when capturing, set the Image F ormat to YUY2 or RGB , and the Image Dimensions to 320x240 . Although you can capture larger than 320x240 , the file size will be larger and the video capture quality will be down graded.
button in the middle of the WinTV window and moving it to the new position. Then let it go! Move the WinTV window in T itleMode by clicking and holding your mouse button on the Title Bar (where it says Hauppauge W inTV32), hold- ing it down and dragging it to the new position.
Y ou’ll see the Channel Manager . F rom the Channel Manager , you can A dd, Edit or Delete channels. Y ou can also create channel suites, which are subsets of the All Channel suite. F or example, you can have a suite of just TV news channels, and name this suite “News”.
Setting full screen TV mode Click Display/P refer ences/View and then click on the TV Mode tab. Set Allow Resolution Change . If you then click on the TV icon on the 32 T oolbar , the application will switch the VG A mode to the chosen size (using the Windows Quick Res feature), allowing the image to be viewed full screen.
Image Save, Print and Copy to Clipboard The process to save, print or copy an image starts with the digitizing of a single video frame. When one of these functions are clicked on, the next video frame is moved into your PC ’s main system memor y instead of the VG A display .
Adjusting the video image’s color Y ou can adjust the brightness, contrast saturation and hue of the live TV image by using the color adjustment menu.
Keyboard control of the 32 application Convenient keyboard controls duplicate the functions of the toolbar . V olume Up = P age Up V olume Down = P age Down Mute = Ctrl+M Channel Up = Plus (+) Channel.
Click on Browse , then look in the P r ogram Files / director y . Select WinTV 32.exe . Then click on NEXT to finish to set up the shortcut. W inTV -USB Installation and R eference Manual 2-13.
2-14 W inTV -USB Installation and R eference Manual.
Creating Digital Video movies with WinTV -USB Overview of Video Clip Capture Live video which is digitized by the video digitizer (see “How W inTV USB works”) can be “captured” as a video sequence (or “video clip”) by using the W inTV Captur e program.
Using WinTV Capture The WinTV-Capture program is an easy-to-use program that previews live video, captures an A VI file to disk, and plays back the A VI file to your VG A screen. WinTV -Capture can capture and playback video clips, but does not pro- vide video editing capabilities.
The WinTV -Capture program can use several different types of color formats when capturing video clips. F or highest capture per formance, choose the YUY2 OR RGB for mats. These give excellent capture image quality and frame rate, but will give slow per for mance on playback of 320x240 image size videos.
a) Make sure the audio output of the card is plugged into the LineInput of the sound board. b) Make sure the LineInput volume for recording is set cor rectly and not muted. Open the V olume control panel, then click on Options / P r operties . In the panel Adjust volume for r ecording set for Recording .
The consumption of hard disk space is dependent upon the size of the video image while capturing, the image for mat plus the number of frames/second. Using the YUY2 OR RGB image for mat, the following.
3-6.
T eletext Data Reception using VTPlus ( I n Europe ONL Y) T eletext is used in Europe and other parts of the world to transmit digital data along with a television picture. T eletext data is transmitted in an invisible part of the TV picture called the "V ertical Blanking Inter val" or VBI.
Starting VTPlus If the VTPlus application is provided on CD-ROM, then it will automatically be installed from the Installation CD-ROM. T o start VTPlus, click on the VTPlus button in WinTV32 or click on the TELE button in WinTV2000 . this will close the TV application and launch VTPlus.
VTPlus toolbar *Note: These fuctions are not applicable in the UK. 1. Reception indicator : when this symbol is red, your requested page is being received. 2. Script: shortcut for Options/Script . See Help for infor mation on program- ming the Script.
Quickselect T eletext pages By using the Ctrl + N key a Create and Receive page pops up requesting a page number . T ype the requested page number . If this page is to be received continuous- ly (ever y time the page is received, the page is automatically updated), click the Update Continuously box.
Then click on Edit/Copy option from the Edit menu and click the left button mouse. The infor mation is now in the PC memor y . T o create a link to the DDE supported applications (such as your spreadsheet), select “ edit past special ” in your application and choose the past link option.
4-6 W inTV -USB Installation and R eference Manual.
Using the Radio Application If you have purchased the -radio device, in addition to watching TV you can also tune in radio stations on the FM band. The radio device has two aerial inputs, one for TV and one for FM radio.
Using the Radio Buttons V olume: The audio volume is adjusted by setting the LineIn level in the V olume Control applet. T une: Fine tune the cur rent radio channel. Seek: Search for the next active FM radio channel. Mem: Sets a FM radio channel preset.
1. Scan Mode: P resets - When P r esets is chosen and the Scan button is clicked, -radio tunes in only the stations which are assigned to the P reset but- tons. 2. Scan Mode: All - When All is chosen and the Scan button is clicked, - radio tunes in all radio stations.
5-4 W inTV -USB Installation and R eference Manual.
How WinTV -USB W orks Video Overlay mode of operation Live TV can be displayed on your VG A screen by using either the Video Overlay or the P rimar y Surface mode.
Also, because the video is moved directly onto the P rimar y Sur face, features such as close captioning and full-screen TV in resolutions greater than 640x480 will be disabled.
T roubleshooting This chapter includes troubleshooting help for solving common problems. Problem: Bad colors in the TV window If your VG A display is r unning in 256 color mode, the TV picture will be dis- played with only 256 colors. This compares with the 16 million different colors which are in the original TV image.
enough video RAM to hold the TV image. In this case, resorts to P rimar y Sur face mode, which lowers image quality . A memor y upgrade on your VG A dis- play adapter might fix this problem. Another possible cause of this problem could be that your VG A display adapter does not support Windows 98 Direct Draw .
Primary Surface mode & DIB Draw It is sometimes useful to use a mode of operation of your VG A card known as P rimar y Surface mode or DIB Draw . This can be helpful in eliminating VG A compatibility problems, or improving picture quality on some VG A boards when used in some resolutions.
7-4 W inTV -USB Installation and R eference Manual.
Updating the driver F rom time to time, there might be a new W inTV USB driver which is an improvement over the existing driver . Driver updates can be downloaded from the Hauppauge Inter net W eb site (see the front page of this manual for the URL). The WinTV USB update is combined with the driver uninstaller and the driver installer .
Click Next . The Update program now uninstalls the existing WinTV -USB driver , then copies a number of files to your hard disk: A fter the Driver installation program has copied all of the files over to your disk drive, you will be asked to reboot: Click OK to reboot your PC.
The HCWCLEAR application can be found in the MISC/UTILITY director y: Run HCWCLEAR by double clicking on its icon: Click OK . Y ou will then see the following message: Click Ye s .
it means that there is an application r unning which is using the drivers. F or exam- ple, if you see the following er ror : it means that one of the WinTV USB driver files in use . Y ou can either ignore the er ror , or can can double check to make sure there are no applications r unning in the system that might be using the WinTV USB driver .
T echnical Support T echnical support telephone If you have questions regarding installation or compatibility , please contact our technical support staff at: (631) 434-3197 (631) 434-3198 Fax USB FAQ-URL www .
A-2 W inTV -USB Installation and R eference Manual.
The Hauppauge Limited W arranty W arranty Hauppauge Computer W orks, Inc. war rants the W inTV USB to be free from defects in material and workmanship for a period of 2 years from date of initial retail purchase. W e will, at our option, repair or replace a defective product.
B-2 W inTV -USB Installation and R eference Manual.
デバイスHauppauge WinTV-USBの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Hauppauge WinTV-USBをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHauppauge WinTV-USBの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hauppauge WinTV-USBの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hauppauge WinTV-USBで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hauppauge WinTV-USBを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHauppauge WinTV-USBの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hauppauge WinTV-USBに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHauppauge WinTV-USBデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
