HiFi Worksメーカー811-TK5M91-031の使用説明書/サービス説明書
ページ先へ移動 of 20
SIZE: 148 x 210mm 20 CD HOME STEREO SYSTEM INSTRUCTION MANUAL 811- TK5M91-031.
- 1 - PRECA UTIONS Follow the advice below for safe and appropriate operations. Placement • Do not use the unit in places which are e xtremely hot, cold, dusty , or humid.
- 2 - Important Safety Instructions (F Important Safety Instructions (F Important Safety Instructions (F Important Safety Instructions (F Important Safety Instructions (F or USA) or USA) or USA) or USA) or USA) 1 . Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
- 3 - Important Switch off the power before connecting speakers and other equipment. Speaker Cord Connections Connect the Red wires to the Red (+) terminals and the Black wires to the Black (-) terminals Note: Connecting speakers other than the speakers supplied with the unit, may damage the unit.
- 4 - Power cord Connection 1. Make sure that all the components and speakers are connected correctly. Caution • Be sure the AC power cord is disconnected and all functions are off before making connections. • When you are not going to use the unit for a long period of time, disconnect the AC power cord.
- 5 - P P P P P ARTS IDENTIFICA ARTS IDENTIFICA ARTS IDENTIFICA ARTS IDENTIFICA ARTS IDENTIFICA TIONS TIONS TIONS TIONS TIONS 1 ) DISPLAY 2 ) CD DOOR 3 ) SKIP/SEARCH buttons 4 ) MULTI-JOG/DISC SKIP co.
- 6 - REMO TE CONTROL 1 ) FUNCTION button 2) PLAY/PAUSE button 3) STOP button 4) RANDOM button 5) REPEAT button 6) SKIP button 7) DIMMER 8) VOL – button 9) SKIP button 1 0 ) Number (0-9) and (+10) b.
- 7 - ADJUSTING THE SOUND TO USE THE X-BASS Press the SOUND mode button repeatedly, so that "X-BASS" appears on the display window. Rotate the MULTI-JOG the control to select the level 1, 2 or off. TO ADJUST THE VOLUME Rotate the VOLUME knob to adjust the sound.
- 8 - SETTING THE CLOCK Notes: • The clock starts operating from “0” seconds. (Seconds are not displayed.) • In the event of a power failure or when the AC power lead is disconnected, the clock display will go out.
- 9 - SLEEP OPERATION The tuner, CD, tape and AUX can all be turned off automatically. 1. Select the desired sound source. 2 . Press the TIMER/SLEEP button, so that “SLEEP” is displayed. 3. To change the sleep time: Sleep time will initially be 90 minutes.
- 10 - AM Connect the loop aerial (provided) to the 'AM LOOP aerial' snap terminals at the back of the unit. FM Fully unwind the wire aerial. Then extend the wire aerial and place it in the position that receives best reception. NOTE: Do not connect to an outside aerial.
- 11 - PRESETTING ST A TIONS 1. Press the FUNCTION button to TUNER. 2. Press the STOP/BAND button to select the desired band and tune to the required station. 5. Press the MEMORY button to store the station. Repeat steps 2-5 to set other preset station.
- 12 - 2 . Press FUNCTION repeatedly until " 20 CD" appears. 3 . Open the CD door by pushing the top right edge of the cover. 4 . Rotate the DISC SKIP control to turn the tray . Place other disc(s) in the disc holder(s). And turn to select disc number.
- 13 - LOCATING A PARTICULAR POINT IN A TRACK Note : Searching and skipping can be done during playback or pause stage but are effective for the currently selected disc only. Use DISC SKIP button to choose another disc. COMP A CT DISC OPERA TION Keep it pressed A specific track directly Press the numbered buttons to enter the track number.
- 14 - COMP A CT DISC OPERA TION 2. Press the numbered buttons 1- 20 or SKIP/SEARCH button to select which disc for playback. PROGRAMME PLAYBACK --- in the stop mode You can play back the tracks on the CDs in the disc 1-20 positions in any order desired.
- 15 - 1. Press the FUNCTION button to TAPE. 2. Press the STOP/EJECT button and load a cassette into the cas- sette compartment of Deck A or Deck B. 4. Press the PAUSE button. 2. Insert a cassette in each deck. If you press play on both deck A and deck B sound will only come from the tape in deck B.
- 16 - 1. Cassette tapes have two erase-protection tabs - one for each side. To protect a record- ing from being accidentally recorded over or erased, use a screwdriver to remove one or both of the cassette tape's erase-protection tabs.
- 17 - 2. Insert a tape into the cassette compart- ment. 4. Press the PLAY/PAUSE button of the CD player. RECORDING ---- DECK A ONL Y TO ERASE A RECORDED TAPE 1 . Press the FUNCTION button to TAPE. 2 . Insert a tape with the side you want to erase facing you.
- 18 - CAUSE (AND REMEDY) • Press the VOLUME UP button. • The headphones are connected. Disconnect them. • Reset the unit by pressing the Power/Standby switch. • Suddenly OFF when playing, the SLEEP function is activated. • Make sure you have inserted the disc into each slot at facing right angle to the rotary table.
- 19 - Power consumption 8 6 W Power requirements AC ~ 100V 50/60Hz (Japan) AC ~ 110V/120 - 220/240 50/60Hz (Other countries) AC ~ 120V 60Hz (USA and Canada) AC ~ 220V 50Hz (Hong Kong and China) AC ~ .
デバイスHiFi Works 811-TK5M91-031の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HiFi Works 811-TK5M91-031をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHiFi Works 811-TK5M91-031の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HiFi Works 811-TK5M91-031の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HiFi Works 811-TK5M91-031で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HiFi Works 811-TK5M91-031を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHiFi Works 811-TK5M91-031の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HiFi Works 811-TK5M91-031に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHiFi Works 811-TK5M91-031デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
