Hitachiメーカー26LD8000TAの使用説明書/サービス説明書
ページ先へ移動 of 42
Color LCD TV USER'S MANUAL ⫼ ᠋ ݠ ⫼ ᠊ ݠ 2 6 L D 8 0 0 0 T A READ THE INSTRUCTIONS INSIDE CAREFULL Y . KEEP THIS USER'S MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your te levi sio n.
NOTE: The information in this manual is subject to change without notice. The manufacturer assume s no responsibility for any errors that ma y appear in this manual. TRADEMARK A CKNO WLEDGEMENT VGA and XGA are registered trademarks of Int ernational Business Machin es Corporation.
ENGLISH 1 USE R' S MAN UAL Thank you very much for purchasing the HITACHI LC D Television. Before using your television, please carefully read the "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" so you will know how to operate the television properly.
2 Important Please read this User's Ma nual thoroughly, especially the Safety Instructions on Page 4 to 8. Mis-use may cause damage to your LCD television, which could shorten its lifespan, or cause injury to yourself.
ENGLISH 3 CONTENTS FEA TURES………………….……..…….………2 SAFTY INSTRUCTIONS……………….………4 NOTES……………………….……….….………8 ACCESSORIES…………………………………9 HOW TO SET UP YOUR NEWHIT ACHI LCD TELEVISION……………………….
4 SAFETY INSTRUCTIONS This LCD television has been design ed and manufactured to meet international safety standards, but like a ny electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
ENGLISH 5 SAFETY INSTRUCTIONS (continued) About the Symbols (continued) Be cautious of the power cord connection. Incorrect connection of the power cord could result in fire or electrical shock. • Do not touch the power cord with a wet hand. • Check that the connecting portion of the power cord is clean (with no dust), before using.
6 SAFETY INSTRUCTIONS (continued) About the Symbols (continued) Be careful in moving the television Neglect could result in an injury or damage. • Do not move the television during use. Before moving, disconn ect the power plug and all external connections.
ENGLISH 7 SAFETY INSTRUCTIONS (continued) About the Symbols (continued) Prevention of an obstacle to Radio receivers This television has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio receivers. • Keep the television away from Radio.
8 Notes About the Symbols (continued) About screen defects • High precision technolo gy is used in the making ofLCD p anels but there may be dark spots (points that do not illuminate) and bright spots (points that are too bri ght) in some cases. These do not indicate a malfuncti on.
ENGLISH 9 ACCESSORIES Check to make sure you have the following accessories before disposi ng of the packing material. POWER CORD 2. USER’S GUIDE 3. BATTERIES 4.
10 HOW TO SETUP YOUR NEW HITACHI LCD TELEVISION To take measures to prevent the LCD Televi sion from tipping over and prev ent possible injury it is important to mount the unit in a stable place. Securing to a wall *Keep the LCD Television four inches away from the wall except those hung to the wall mount bracket.
ENGLISH 11 HOW TO SETUP YOUR NEW HITACHI LCD TELEVISION Caution when moving the main unit As this product is heavy, whenever it is moved, two people are required to transport it safely. Whenever the unit is moved it s hould be lifted forward using the top and base on both sides for stability.
12 FRONT PANEL CONTROLS Front VIEW 26” LCD Television POWER light indicator To turn the television ON, press the main po wer button located on the BACK right side of the television. A red stand-by ind icator lamp located on the lower right corner of the front bezel will illuminate.
ENGLISH 13 TOP SIDE PANEL CONTROLS TOP SIDE VIEW 26” LCD Television 6XES OWER button This power button is for power on the LCD television or change to standby mode. ཱ CHANNEL selector Press these buttons until the desired ch annel appears in the top left corner of the television screen.
14 REAR PANEL MAIN POWER SWITCH & JACKS MAIN POWER button This power button is for the complete system, and must be turned ON/OFF manual ly. It is recommended to leave the “MAIN POWER” to ON condition (lights red) for stand-by mode. NOTE: It is required that there should be at least 5 seconds between MAIN POWER button off than on.
ENGLISH 15 REAR PANEL MAIN POWER SWITCH & JACKS ྲྀ V I D E O 3 S-VIDEO Inputs Provide S-VIDEO (Super Video) jacks for connecting equi pment with S-VIDEO output capability. VIDEO By using the VIDEO button of the remote control, you can select Vide o source.
16 SIDE PANEL CONTROLS SIDE VIEW 26” LCD Television VIDEO 4 S-VIDEO Inputs Provide S-VIDEO (Super Video) jacks for c onnecting equipment with S-VIDEO output capability. ཱ VIDEO Input By using the VIDEO button of the remote control, you c an select Composite video source.
ENGLISH 17 CONNECTING EXTERNAL SOURCES The exact arrangement you u se to connect the PC, VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your LCD television is dependent on the model and features of each component. Check the owner’s manual of each component for the locatio n of video and audio inputs and outputs.
18 CONNECTING EXTERNAL SOURCES z Connect the equipment to the television, making the correct rear panel and side panel connection. z Before connecting anything : - Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram.
ENGLISH 19 CONNECTING EXTERNAL SOURCES A. DVD player (component / composite / S-VIDEO signal) B. Subwoofer C. PC D. VCR player (composite / S-VIDEO signal) E.
20 Remote Control Buttons and Functions Turn the Television On or Off z Press the button to turn the television on or standby mode. z When television is turned on, the power lamp changes from red to green. Choose a Television Channel z Use Number buttons to choose specific channel.
21 Remote Control Buttons and Functions Adjust the Volume z Press the -/+ buttons to adjust the volume. z The volume indicator appears and the volume changes as you press the -/+ buttons. z Muting the sound : Press the (MUTE) button to turn off the sound.
22 Remote Control Buttons and Functions Aspect Ratio z Y ou can change the screen si ze according to the picture aspect ratio. Choose the optim um one from the following zoom modes. z Choose the zoom mode : Press the P .Size button to display the zoom menu.
23 Remote Control Buttons and Functions POP / PIP FUNCTIONS z TV , VIDEO and PC pictures can be watched at the same time. 1. Press the POP ON/OFF button to turn on/of f multi picture function. POP mode support pictures : NOTE : Y ou can press Ż / Ź buttons to select which display window will be changed.
24 Remote Control Buttons and Functions 3. Press the POSITION button to change the position of sub picture..
25 Teletext Function Basic Operation 1. Choose a TV channel with a teletext broadcast. 2. Press TV / TEXT button to display the teletex 3. Choose a teletext page by pressing color buttons or number buttons. z If you have trouble receiving teletext broadcasts, consult your local de aler or the teletext function.
26 OSD (On-Screen Display) To use all your television’s functions, you need to understand the basic menu operating techniques fully. THERE ARE TWO DIFFERENT MODES FOR THE OSD ARE THE FOLLOWING: Video Mode: Displays w hen the TV, VIDEO1, VIDEO2, VIDOE3, and VIDEO4 is selected.
ENGLISH 27 OSD (On-Screen Display) Picture Setting z Picture mode Y ou can choos e one of the four PICTURE MODE to adjust the picture settings. They are Dynamic, Natural, Cinema, and Game. z Picture Adjustment Y ou can change the picture s ettings of each PICTURE MODE as you like.
28 OSD (On-Screen Display) Initial Setup z Language Select LANGUAGE and press S / T buttons to choose the language. They are English, Chinese, si mplified Chinese, Japanese, Russian. z Auto Channel Scan In auto channel scan, the TV automatically scans through all available channels.
ENGLISH 29 OSD (On-Screen Display) (NOTE : If you do not have a clear picture or no color appears, change the color system. Sound System : Select SOUND SYSTEM and press the W / X buttons to choose the sound system.(AUTO/B/G/ D/K I) (NOTE : If the SOUND SYSTEM setting for a TV channel is incorrect, it may proven the sound from being issued.
30 OSD (On-Screen Display) 4. Press the red button to store the setting. To return to the INITIAL SETUP menu : Press the RETURN button. To exit a menu instantly : Press the EXIT button. INSERT 1. Press the S / T and W / X buttons to choose a program number for which you want.
ENGLISH 31 OSD (On-Screen Display) DELETE 1. Press the S / T and W / X buttons to choose a TV channel Every time you press the S / T and W / X buttons, the programmed number changes and the picture of the TV channel stored in the programmed num ber appears on the screen.
32 OSD (On-Screen Display) 26LD8000T A/ PC Supported Mode List 1. The Auto SETUP function will work automatically when you change the resolution of PC mode. The picture position, clock, and phase will be optimiz ed. 2. Whenever your LCD-T V is connected to the PC, or you have changed the PC display mode.
ENGLISH 33 OSD (On-Screen Display) (NOTE : When COLOR TEMPERATURE at HIGH and LOW, R,G,B, and bars in gray and can not move. R : You can adjust the Red color component. G : You can adjust the Green color component. B : You can adjust the Blue color component.
34 Self Diagnosis Function If a problem arises while you are using the television, pl ease read this self diagr am function guide carefully before yo u ask t o have the television repaired.
ENGLISH 35 Self Diagnosis Function Other concerns: z When the SLEEP TIMER function operates, the television is auto matically turned off. If the television suddenly turns off, try to press the standby button to turn on the television once again. If the television goes back to normal, there is no problem.
36 PRODUCT SPECIFICATIONS Model Item 26LD8000T A Brocadcasting system P AL(I, D/K, B/G) , SECAM(D/K, B/G), NTSC M Color system P AL, NTSC 4.43, NTSC 3.
ENGLISH 37 PRODUCT SPECIFICATIONS (continued) Signal Input RGB terminal (D-sub 15-pin connector) ವ :KHQGLIIHUHQWNLQGVRILQSXWVLJQDOVDUHVLPXOWDQHRXVO.
38 PRODUCT SPECIFICATIONS (continued) Signal Input Applicable video signals for input terminal (TV mode) T erminal RCA/S-video D-sub Signal CVBS S-video Component RGB A V1 o A V2 o A V3 o o A V4 o o PC RGB o With composite input(A V3~A V4 input) and S-video input (A V3, A V4 input).
ENGLISH 39 PRODUCT SPECIFICATIONS (continued) Signal Input With Analog signal input (RGB input) Mod e No. Mode Name Resolution H. Freq. (kHz) V . Freq. (HZ) H. Polarity V . Polarity Pixel Clock (MHz) H. To t a l (Clock) H. Act ive (Clock) H. Back Porch (Clock) H.
40.
デバイスHitachi 26LD8000TAの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hitachi 26LD8000TAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHitachi 26LD8000TAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hitachi 26LD8000TAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hitachi 26LD8000TAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hitachi 26LD8000TAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHitachi 26LD8000TAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hitachi 26LD8000TAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHitachi 26LD8000TAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。