Hitachiメーカー42PD380TA-P2の使用説明書/サービス説明書
ページ先へ移動 of 47
USER'S MANUAL 取扱説明書 Plasma Color Television Model 42PD 3 80TA -P2 用 户手册 Έ˾˿̱ êìäéÇéÑëíÇé èéãúáéÇÄíÖãü 3U82041A [E] COVER 05.
<+9' ݵۍᐯѦஇᔶŔඁᏁྐʪᆤຊփڄੋᆤé Љ܇୕܇ϏၳݵմߟᏻݠЉږڄੋᆤං̰ੋᆤé WFTB!ݥᆐ૧ፇኯljೕۉጱՔጚၹࣷڦฆՔă ᆶಈईׂ.
<+9' ݵۍᐯѦஇᔶŔඁᏁྐʪᆤຊփڄੋᆤé Љ܇୕܇ϏၳݵմߟᏻݠЉږڄੋᆤං̰ੋᆤé WFTB!ݥᆐ૧ፇኯljೕۉጱՔጚၹࣷڦฆՔă ᆶಈईׂ.
1 ENGLISH USER'S MANUAL Thank you very much for purchasing the HITACHI Plasma Television. Before using your television, please carefully read the “SAFETY INSTRUCTIONS” and this “USER'S MANUAL” so you will know how to operate the television properly.
2 Large-screen, high-definition plasma display panel The 42-inch color plasma display panel, with a resolution of 852(H) x 480(V) pixels, creates a high-definition, large-screen (aspect ratio : 16:9) and low-profile flat display.
3 ENGLISH FEATURES .......................................................... 2 SAFETY INSTRUCTIONS ................................... 4 IMAGE RETENTION OF PLASMA TELEVISION ... 8 Location of controls .............................................. 9 Remote Control .
4 SAFETY INSTRUCTIONS This Plasma television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
5 ENGLISH Be cautious of the power cord connection. Incorrect connection of the power cord could result in fire or electrical shock. • Do not touch the power cord with a wet hand. • Check that the connecting portion of the power cord is clean (with no dust), before using.
6 SAFETY INSTRUCTIONS (continued) Disconnect the plug from the power outlet. CA UTION Be careful in moving the television. Neglect could result in an injury or damage. • Do not move the television during use. Before moving, disconnect the power plug and all external connections.
7 ENGLISH SAFETY INSTRUCTIONS (continued) Prevention of an obstacle to Radio receivers This television has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio receivers. • Keep the television away from Radio.
8 IMAGE RETENTION OF PLASMA TELEVISION There are different characteristics that result in panel image retention depending on how the plasma television is used.
9 ENGLISH Front Side Description of Indicators and Controls 1. Main Power Switch: To turn the unit on or off completely. 2. PROGRAM ▲ / ▼ -Buttons: Press ▲ to change to a higher numbered channel set into memory. Press ▼ to change to a lower numbered channel set into memory.
10 Function Page Turn the unit on or off Sleep-Timer Display program position number Turn the sound on/off Select channel Select Teletext page Switches between the present channel and the last selecte.
11 ENGLISH Z Z Z Z Z Z Install the batteries Use batteries type UM-4 (AAA-Size). Do not use the storage batteries. The remote control does not work properly with weak voltage from the storage batteries. Replace the exhausted batteries with new batteries.
12 Antenna connection Note: Before you connect something: • To avoid every possible damage, turn off the TV-unit with Main Power Switch and then pull the power plug out. • Arrange the desired connection. • When the connection made up firmly and correctly, connect the unit to AC100-240V, 50/60Hz and turn the unit on.
13 ENGLISH The e xact arrangement you use to interconnect v arious video and audio components to the Plasma T ele vision is dependent on the model and features of each component. Check the Owner's Manual provided with each component f or the location of video and audio inputs and outputs.
14 Rear lower of the Plasma T elevision If your D VD play er or Satellite receiver has a S-Video out jac k, connect cords as shown. Rear lower of the Plasma T elevision To S-Video OUT Audio cord (not .
15 ENGLISH To A udio (L) Input T o A udio (R) Input Audio cord (not supplied) Amplifier Rear lower of the Plasma T elevision AUDIO (R) OUTPUT AUDIO (L) OUTPUT Rear lower of the Plasma T elevision To C.
16 A udio cord (not supplied) V GA cable (not supplied) Monitor Display modes MODE Resolution Refresh rate VG A 640x480 60Hz VG A 800x600 60.3Hz WV GA 848x480 60Hz XGA 1024x768 60Hz WXGA 1280x768 60Hz.
17 ENGLISH Side of the Plasma T elevision A udio/Video cord (not supplied) To A udio/Video OUT Side of the Plasma T elevision To A udio/Video OUT A udio/Video cord (not supplied) Connections to other .
18 18 Quick guide for MENU-operation/Selecting the video input sour ce Make sure the antenna connection and power supply as the description on 12 . : SELECT : ADJUST : RETURN MENU AUTO TUNING MANUAL T.
19 ENGLISH On-screen Language Selection/T eletext Language Selection 1 Select LANGU A GE. Then press or to select the desired language. 2 Press MENU repeatedly until the MENU disappears. On-screen Language Selection 1 Select TEXT LANGUA GE. Then press or to select WEST or EAST .
20 20 PA L C H 1 : RETURN MENU Automatic station pr esetting with the built-in T uner Y our television has an A utomatic T uning System which makes tuning in your tele vision easy .
21 ENGLISH Change the or der of stored channel 1 Select SOR T . Then press . 2 Press or until the position number that y ou w ant to mov e appears (e.g. CH 40), then press ENTER . 3 Press or until the program-position on which you w ant to put the moving progr am appears (e.
22 22 Example: Preset the BBC on program position 2. 1 Select MANU AL TUNING. Then press . 2 Press or to select color system (e.g. P AL). Then press ENTER . 3 Press . The auto search star ts forw ard. It will stop at each station with good reception. Press again until you receive the BBC .
23 ENGLISH Basic Operation Press or to change to the program forward or backward. The changing takes approx. 2 seconds. If the auto search stored only 5 stations, these only 5 also will appear. Still uncovered or hidden store position will not appear 42 .
24 Timer functions The on timer feature allows you to automatically turn on your TV after a preset amount of time (up to 12 hours and 59 minutes) at the selected channel. The off timer also allows you to turn off your TV after a preset amount of time.
25 ENGLISH Stereo r eception with the built-in tuner This built-in T uner can receive Stereo-/2 channel-program. In case the Stereo broadcast was send out with NICAM, this unit can distinguish these NICAM Stereo broadcasts automaticall y . Notes: • In case of bad reception, the stereo sound also can be disturbed.
26 Ster eo reception with the built-in tuner (continued) In case of 2 channel-sound reception, you can select the desired sound with AUDIO 1/2. PICTURE POSITION MUL TI PICTURE MAIN/ SUB.
27 ENGLISH Bass, T reble and Balance/Perfect V olume 1 Select BASS. Then press or to adjust the bass. If you wish to set the treb le or balance, press or to select TREBLE or BALANCE.
28 Tu r ning of f the built-in speakers/Using the wow TM surr ound sound featur e NICAM AUTO BASS 25 TREBLE 25 BALANCE 0 PERFECT VOLUME OFF SPEAKERS ON / OFF HDMI HDMI : RETURN MENU : ADJUST : SELECT Turning off the built-in speakers Use this f eature to tur n the TV speakers off when you connect an audio system 15 .
29 ENGLISH Brightness, Contrast, Color and Sharpness/DNR 1 Select BRIGHTNESS. Then press or to adjust the brightness. If you wish to set the contrast, color , tint, or sharpness, press or to select CONTRAST , COLOR, TINT , or SHARPNESS. The menu “TINT” can be selected at A V -Playbac k, if a NTSC 3.
30 Selecting the color temperatur e/Film mode COLOR TEMPERA TURE COOL COOL / NORMAL / WARM FILM MODE OFF : RETURN MENU : ADJUST : SELECT Selecting the color temperature Change the picture quality by selecting from three preset color temperatures –cool, normal and warm– as described in the following table; 1 Select COLOR TEMPERA TURE.
31 ENGLISH Pictur e for mat Each time the PICTURE SIZE b utton is pressed, the screen display size will change in sequence. SUBTITLE SUBTITLE SUBTITLE SUBTITLE.
32 Scrolling the P ANORAMIC/ZOOM-Wide picture : SELECT : ADJUST : RETURN MENU AUTO TUNING MANUAL TUNING SORT TEXT LANGUAGE WEST LANGUAGE ENGLISH VERTICAL POSITION : SET ENTER : ADJUST Scrolling the PANORAMIC/ZOOM-wide picture During the PANORAMIC or Zoom-wide mode you can adjust the v er tical picture position.
33 ENGLISH Multi Picture Mode With this feature, you can watch different pictures simulta- neously on one screen in several ways. • To activate Multi Picture mode in either TV, AV, and PC mode, press MULTI PICTURE . 2-picture mode Y ou can watch two diff erent pictures side by side .
34 Multi Pictur e Mode (continued) Activate the Multi Picture Mode in PC Mode When you activ ate the Multi Picture mode in PC Input, the picture will be displa yed with Picture-in-Picture style (the Sub- screen displa yed inside of the large screen (Main-screen)).
35 ENGLISH Screen wipe Aids recovery of retained images on the screen. Select SCREEN WIPE. Then press . MENU disappears and the picture showing on the screen will be replaced with a white screen. The screen will retur n to normal when any button is pressed.
36 COLOR SYSTEM A UTO SCREEN WIPE SCREEN SA VER 20 ST A TIC IMAGE OFF BLACK SIDE P ANEL ON/ OFF : RETURN MENU : ADJUST : SELECT Static Image/Black Side Panel Static Image Automatically reduce the brightness in small steps if a static (stationary) image is displayed for a long time.
37 ENGLISH Y ou can lock the fr ont panel buttons to prevent your settings from being changed accidentally (by children, for example). When the panel lock is in ON, all control buttons on the TV front panel (except POWER) do not operate. 1 Select F .P ANEL LOCK.
38 Example: Adjust the contrast. 1 During PC mode press MENU once. The Menu appears on the TV -screen. 2 Press or to select CONTRAST . Then press or to adjust CONTRAST .
39 ENGLISH Selecting the HDMI audio input sour ce NICAM AUTO BASS 25 TREBLE 25 BALANCE 0 PERFECT VOLUME OFF SPEAKERS ON HDMI HDMI /DVI : RETURN MENU : ADJUST : SELECT.
40 T eletext T eletext is sent page by page . This unit is able to automatically store up to 812 pages. Storage lasts until all pages hav e been received. The pages can only be accessed when they hav e been stored. This can take a moment. F aste xt/T optext The F astext/T optext is telete xt with a special director y .
41 ENGLISH 667 667 BBC-Text 21.07.03 15:01:38 1/2 T eletext (continued) Hold Pages Some pages are divided up into subpages by the channel. Subpages are automatically shown in turn, as they are transmit- ted. In order to hold the page, press HOLD . Press HOLD again in order to display the next subpage.
42 The stored channels are switched back or fore individually using or . Channels that should not appear can be concealed. These channels are not deleted. They can be ac- cessed at any time with the 10 Number Buttons . 1 Select the channel to be concealed (i.
43 ENGLISH Connect with another equipment ~ 17 . 1 In.
44 Tr oubleshooting table/Specifications In menu, TUNING-line can not be selected. The unit is set to AV mode. Press 1 on the remote control. Symptom Possible solution Page No picture, no sound. Switch on the set. Check the 100~240 V wall outlet. Select appropriate input mode.
デバイスHitachi 42PD380TA-P2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Hitachi 42PD380TA-P2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHitachi 42PD380TA-P2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hitachi 42PD380TA-P2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hitachi 42PD380TA-P2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hitachi 42PD380TA-P2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHitachi 42PD380TA-P2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hitachi 42PD380TA-P2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHitachi 42PD380TA-P2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
