HitachiメーカーCP-X4015WNEFの使用説明書/サービス説明書
ページ先へ移動 of 123
1 Projector User's Manual (detailed) Oper a ting Guide Thank you for purchasing this projector . ►Before using this product, please read all manuals for this product. Be sure to read Safety Guide first. After reading them, store them in a safe place for future reference.
2 Contents Introduction ............... 3 Features . ..................... 3 Checking the contents of package ... 3 Part names . ................... 4 Setting up . ................ 7 Arrangement ................... 7 Connecting with your devices .....
3 Introduction Introduction • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector . Use special caution for the lens. • The projector may make a rattling sound when tilted, moved or shaken, since a flap to control the air flow inside of the projector has moved.
4 Introduction ►Do not open or remove any portion of the product, unless the manuals direct it. ►Do not subject the projector to unstable conditions. ►Do not apply a shock or pressure to this product. ►Do not look into the lens and the openings on the projector while the lamp is on.
5 Introduction Part names (continued) Control panel (1) ST ANDBY/ON button ( 21 ) (2) INPUT button ( 24 ) (3) MENU button ( 32 ) (4) LAMP indicator ( 11 5 ) (5) TEMP indicator ( 11.
6 Introduction Part names (continued) R emote control (1) VIDEO button ( 24 ) (2) COMPUTER button ( 24 ) (3) SEARCH button ( 25 ) (4) ST ANDBY / ON button ( 21 ) (5) ASPECT button ( .
7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. For the case of installation in a special state such as ceiling mount, the specified mounting accessories ( Specifications in the User ’ s Manual (concise) ) and service may be required.
8 Setting up Arrangement (continued) WARNING (continued on next page) ► Install the projector where you can access the power outlet easily . If an abnormality should occur , unplug the projector urgently . Otherwise it could cause a fire or electric shock.
9 Setting up Arrangement (continued) ► Place the projector in a cool place with sufficient ventilation. The projector may shutdown automatically or may malfunction if its internal temperature is too high. Using a damaged projector could result in a fire and an electric shock.
10 Setting up Connecting with y our de vices Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device.
11 Setting up • Plug-and-Play is a system composed of a computer , its operating system and peripheral equipment (i.e. display devices). This projector is VESA DDC 2B compatible. Plug-and-Play can be used by connecting this projector to a computer that is VESA DDC (display data channel) compatible.
12 Connecting with your devices (continued) • Before connecting the projector to a computer , consult the computer ’s manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector .
13 Setting up Connecting with your devices (continued) (continued on next page) • If an oversized USB storage device blocks the LAN port, use a USB extension cable to connect the USB storage device. NO TE ► Before connecting the projector to a network system be sure to obtain the consent of the administrator of the network.
14 Setting up • The HDMI port of this model is compatible with HDCP (High-band- width Digital Content Protection) and therefore capable of displaying a video signal from HDCP compatible DVD players or the like. - The HDMI supports the following signals.
15 Setting up Connecting with your devices (continued) Monitor AUDIO IN 1 2 3 AUDIO OUT Speakers (with an amplifi er) Mic • If a loud feedback noise is produced from the speaker , move the microphone away from the speaker . NO TE • Y ou can connect a dynamic microphone to the MIC port with a 3.
16 Connecting to a po wer supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector . 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange.
17 Use the supplied adapter cover to prevent the USB wireless adapter from coming of f easily . 1. Loosen the screw (marked with triangle) on the bottom left of the USB TYPE A port. 2. Insert the tab of the cover into the hole at the upper right of the USB TYPE A port in the direction of the arrow .
18 Remote control Installing the ba tteries Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.
19 (approx.) About the r emote control signal The remote control works with the projector ’s remote sensor . This projector has a remote sensor on the front. The sensor senses the signal within the following range when the sensor is active: 60 degrees (30 degrees to the left and right of the sensor) within 3 meters about.
20 When the simple mouse & keyboard function of this product does not work correctly , please check the following. • When a USB cable connects this projector with a computer having a built-in pointing device (e.
21 1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet. T ur ning on the po wer 2. Make sure that the POWER indicator is steady orange ( 11 5 ). Then remove the lens cover . 3. Press ST ANDBY/ON button on the projector or the remote control.
22 P ow er on/of f ►A strong light is emitted when the projector ’s power is on. Do not look into the lens of the projector or look inside of the projector through any of the projector ’s openings. ►Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot.
23 Operating 1. Adjusting the v olume Use the VOLUME + / VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds.
24 1. Press INPUT button on the projector . Each time you press the button, the projector switches its input port from the current port as below . Selecting an input signal ● While ON is selected for AUTO SEARCH item in OPTION menu ( 56 ), the projector will keep checking the ports in above order repeatedly till an input signal is detected.
25 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE DOWN ON OFF FREEZE UP 㧗 VOLUME MY SOURCE / DOC. CAMERA button 1. Press the MY SOURCE / DOC. CAMERA button on the remote control. The input signal will be changed into the signal you set as MY SOURCE ( 59 ).
26 Operating Selecting an aspect r a tio ● ASPECT button does not work when no proper signal is inputted. ● NORMAL mode keeps the original aspect ratio setting. ● The display will be dark for a split second while switching the Aspect, but this is not a malfunction.
27 Operating Adjusting the pr ojector’ s ele vator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 14 degrees.
28 Operating 1. Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen. Adjusting the position 2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position. When you want to reset the operation, press RESET button on the remote control during the operation.
29 Operating 1. Press KEYST ONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion. Cor r ecting the k eystone distor tions 2. Use the ▲/▼ cursor buttons to select AUTO or MANUAL operation, and press the ► button to perform the following.
30 Operating 1. Using the ma gnify f ea tur e 2. MAGNIFY ON/OFF button VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE DOWN ON OFF FREEZE UP 㧗 VOLUME 3. 4. Press the MAGNIFY ON button on the remote control.
31 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu ( 50 ). T o exit from the BLANK screen and return to the input signal screen, press BLANK button again.
32 Operating 1. T o start the MENU, press the MENU button. The MENU you last used (EASY or ADV ANCED) will appear . EASY MENU has priority to appear just after powered on. Using the menu function 2. (1) Use the ▲/▼ cursor buttons to select an item to operate.
33 Using the menu function (continued) 3. T o close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button.
34 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. (continued on next page) Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio.
35 EASY MENU Item Description ECO MODE Using the ◄/► buttons switches the ECO MODE. See the ECO MODE item in SETUP menu ( 47 ). INST ALLA TION Pressing the ► button displays the INST ALLA TION dialog. See the INST ALLA TION item in SETUP menu ( 47 ).
36 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
37 PICTURE menu (continued on next page) Item Description COLOR TEMP Using the ▲/▼ buttons switches the color temperature mode. T o adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.
38 PICTURE menu Item Description SHARPNESS Using the ◄/► buttons adjusts the sharpness. Weak Strong • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. ACTIVE IRIS Using the ▲/▼ cursor buttons changes the active iris control mode.
39 IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
40 IMAGE menu Item Description OVER SCAN Using the ◄/► buttons adjusts the over-scan ratio. Small (It magnifies picture) Large (It reduces picture) • This item can be selected only for a video, s-video and component video signal. • For an HDMI TM signal, this item can also be selected if either (1) or (2) applies.
41 IMAGE menu Item Description H PHASE Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker . Right Left • This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN , USB TYPE A , USB TYPE B or HDMI port.
42 INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
43 INPUT menu Item Description VIDEO FORMA T The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. (2) Using the ◄/► buttons switches the mode for video format. AUTO NTSC P AL SECAM N-P AL M-P AL NTSC4.
44 INPUT menu Item Description COMPUTER IN The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set. (2) Use the ◄/► buttons to select the computer input signal type.
45 INPUT menu Item Description RESOLUTION The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector . (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed.
46 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
47 SETUP menu Item Description AUTO ECO MODE Using the ▲/▼ buttons turns on/off the AUTO ECO MODE. ON OFF • When ON is selected, the projector will always be set to Eco mode at start-up regardless of the ECO MODE ( below ) setting.
48 Item Description ST ANDBY MODE Using ▲/▼ buttons switches the standby mode setting between NORMAL and SA VING. NORMAL SA VING When SA VING is selected, the power consumption in the standby .
49 A UDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table.
50 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
51 SCREEN menu Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST ART UP screen. Display the image you want to capture before executing the following procedure. Selecting this item displays a dialog titled “MyScreen”.
52 SCREEN menu Item Description MyScreen Lock Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON OFF When the ON is selected, the item MyScreen is locked.
53 SCREEN menu Item Description SOURCE NAME Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed.
54 SCREEN menu Item Description SOURCE NAME ( continued ) (6) The current name will be displayed on the first line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. T o erase 1 character at one time, press the RESET button or press the ◄ and INPUT button at the same time.
55 SCREEN menu Item Description C.C. (Closed Caption) The C.C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.
56 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FIL TER TIME.
57 OPTION menu Item Description AUTO POWER OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically .
58 OPTION menu Item Description MY BUTT ON This item is to assign one of the following functions to MY BUTT ON 1/2 on the remote control ( 6 ). (1) Use the ▲/▼ buttons on the MY BUTT ON menu to select a MY BUTTON - (1/2) and press the ► or ENTER button to display the MY BUTT ON setup dialog.
59 OPTION menu Item Description MY BUTT ON ( continued ) • ACTIVE IRIS: Changes the active iris mode. • PICTURE MODE: Changes the PICTURE MODE ( 34 ).
60 OPTION menu Item Description SERVICE (continued) AUTO ADJUST Using the ▲/▼ buttons to select one of the mode. When the DISABLE is selected, the automatic adjustment feature is disabled. FINE F AST DISABLE FINE: Finer tuning including H.
61 OPTION menu Item Description SERVICE (continued) REMOTE FREQ. (1) Use the ▲/▼ button to change the projector's remote sensor frequency setting ( 19 ). 1:NORMAL 2:HIGH (2) Use the ◄/► button to change the projector's remote sensor on or off.
62 OPTION menu Item Description SERVICE (continued) COMMUNICA TION (continued) COMMUNICA TION TYPE Select the communication type for transmission via the CONTROL port. NETWORK BRIDGE: Select this type, if it is required to control an external device as a network terminal, via this projector from the computer .
63 OPTION menu Item Description SERVICE (continued) COMMUNICA TION (continued) RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port.
64 OPTION menu Item Description SERVICE (continued) CLONING (continued) The following items are exempted. OPTION: LAMP TIME, FIL TER TIME, SERVICE(GHOST) NETWORK: WIRELESS AND WIRED SETUP (IP ADDRESS,.
65 OPTION menu Item Description SERVICE (continued) CLONING (continued) Load MyScreen data • Please save the image data as "pj_logo.bmp" or "pj_logo.gif" into USB memory . • Please note that the only compatible formats are as follows.
66 OPTION menu Item Description SERVICE (continued) INFORMA TION Selecting this item displays a dialog titled “INPUT_INFORMA TION”. It shows the information about the current input. • The “FRAME LOCK” message on the dialog means the frame lock function is working.
67 NETWORK menu Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select “NETWORK” from the main menu to access the following functions.
68 NETWORK menu Item Description WIRELESS SETUP (continued) DHCP (Dynamic Host Configuration Protocol) Use the ▲/▼ buttons to turn DHCP on/of f. ON OFF Select OFF when the network does not have DHCP enabled. T o save the setting, press the ► button.
69 NETWORK menu Item Description WIRELESS SETUP (continued) DA TE AND TIME Use the ▲/▼/◄/► buttons to enter the Y ear (last two digits), Month, Date, Hour and Minute. • When this item is set, the same item in the WIRED SETUP menu is overwritten with the same setting ( 73 ).
70 NETWORK menu Item Description WIRELESS SETUP (continued) SSID Use the ▲/▼ buttons to select the SSID to display the SSID menu. #1 DEF AUL T #2 DEF AUL T #3 DEF AUL T #5 CUSTOM #4 DEF AUL T Select one of the DEF AUL T (#1~#4) and press ► or ENTER button.
71 NETWORK menu Item Description WIRELESS INFORMA TION "Selecting this item displays the WIRELESS_INFORMA TION dialog for viewing the wireless LAN settings." Use the ▲/▼ buttons to switch the page. The first page shows the wireless LAN settings.
72 NETWORK menu Item Description WIRED SETUP Selecting this item displays the WIRED SETUP menu for the wired LAN. Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item. DHCP (Dynamic Host Configuration Protocol) Use the ▲/▼ buttons to turn DHCP on/of f.
73 NETWORK menu Item Description WIRED SETUP (continued) TIME DIFFERENCE Use the ▲/▼ buttons to enter the TIME DIFFERENCE. Set the same TIME DIFFERENCE as the one set on your computer . If unsure, consult your IT manager . Use the ► button to return to the menu after setting the TIME DIFFERENCE.
74 NETWORK menu Item Description PROJECTOR NAME (1) Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJECT OR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the first 3 lines.
75 NETWORK menu Item Description MY IMAGE Selecting this item displays the MY IMAGE menu. Use the application to transfer the im- age data. It can be downloaded from the Hitachi web site.
76 NETWORK menu Item Description PRESENT A TION Selecting this item displays the PRESENT A TION menu. Use ▲/▼ buttons to select one of the following items, then press ► or ENTER button to use the function. • T o use Network Presentation, an exclusive application, "LiveV iewer" is required.
77 NETWORK menu Item Description PRESENT A TION (continued) MUL TI PC MODE (continued) • T o change from Single PC mode to Multi PC mode, press ► button to choose OK in the dialog and press the ENTER or INPUT button.
78 SECURITY menu (continued on next page) This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed. T o use SECURITY menu: User registration is required before using the security functions.
79 SECURITY menu Item Description MyScreen P ASSWORD The MyScreen P ASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten.
80 SECURITY menu Item Description PIN LOCK PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 1 T urning on the PIN LOCK 1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/off menu.
81 SECURITY menu Item Description TRANSITION DETECTOR If this function is set to ON and the vertical angle of the projector or the INST ALLA TION setting is different from the previous recorded setting, the TRANSITION DETECTOR ON alarm will be displayed and the input signal will not be displayed.
82 SECURITY menu Item Description MY TEXT P ASSWORD The MY TEXT P ASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT ; • The MY TEXT DISPLA Y menu will be unavailable, which can prohibit changing the DISPLA Y setting.
83 SECURITY menu Item Description MY TEXT DISPLA Y (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLA Y and press the ► or ENTER button to display the MY TEXT DISPLA Y on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLA Y on/of f menu to select on or off.
84 Presentation tools Presentation tools The PC-LESS Presentation reads image and audio data from the storage media inserted into the USB TYPE A port and displays the image in the following modes. The PC-LESS Presentation can be started by selecting the USB TYPE A port as the input source.
85 Presentation tools • Files with a resolution larger than the following are not supported. CP-X2015WN, CP-X2515WN, CP-X3015WN, CP-X4015WN: 1024 x 768 (Still) , 768 x 576 (Movie) CP-WX2515WN, CP-WX3015WN: 1280 x 800 (Still) , 768 x 576 (Movie) (* Some computers may not support 1280 x 800.
86 Presentation tools PC-LESS Presentation (continued) The SETUP menu for the selected image Item Functions SETUP Use the ◄/► cursor buttons to switch each setting or use the ► cursor button to execute the functions as follows. RETURN Press the ► cursor button or ENTER to return to the Thumbnail screen.
87 Presentation tools Y ou can also control the images by using the menu on the Thumbnail screen. PC-LESS Presentation (continued) Operating by the menu on the Thumbnail screen Item Functions Moves to an upper folder . SORT Allows you to sort files and folders as following.
88 Presentation tools PC-LESS Presentation (continued) • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode is able to display up to 20 files in one page. • It is not possible to change the input port by using the INPUT button when the Thumbnail screen, Slideshow , or Full Screen is displayed.
89 Presentation tools PC-LESS Presentation (continued) The Full Screen mode shows a full display image. T o display in Full Screen mode, select an image in the Thumbnail screen. Then press the ENTER button on the remote control, the INPUT button on the control panel or click [ ENTER] on the W eb Remote Control.
90 Presentation tools PC-LESS Presentation (continued) Button operation Functions The remote control Control panel Web Remote Control ▲ ▲ [▲] (Play) / (Pause) toggle ► ► [►] (FF) Fast-forward ◄ ◄ [◄] (REW) Fast-rewind ENTER INPUT [ ENTER ] (Stop), Displays Thumbnail.
91 Presentation tools PC-LESS Presentation (continued) Slidesho w mode While the Slideshow is displayed, the following button operations are enabled when still images are displayed, and the same button operations in the Full Screen mode are enabled when movies are displayed.
92 Presentation tools PC-LESS Presentation (continued) Y ou can play the Slideshow at your desired configuration. Configure the Slideshow items in the Thumbnail. 1) RETURN : Returns to the thumbnail mode. 2) PLA Y : Play the Slideshow . 3) ST ART : Set the beginning number of the Slideshow .
93 Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files in the Thumbnail or Slideshow . The playlist file name is “playlist.txt” and it can be edited on a computer .
94 Presentation tools This function is an interactive tool for use with Hitachi projectors; it offers ef fective features for making classroom and business presentations more fun and easier to understand. Main Functions Drawing on projected images Y ou can draw pictures or text on images projected by our projectors.
95 Presentation tools Connect into the USB TYPE A port on your projector . T o save an image that has been drawn, a USB memory device must also be connected to a USB TYPE A port of the projector . If the projector only has one USB TYPE A port, use a USB hub to connect both devices.
96 Presentation tools Drawing Function (continued) USB (A) USB TYPE B USB TYPE A USB TYPE A Wireless adapter USB memory device T ablet Projector USB hub Computer Mouse Fig.3 Example of connections Wireless adapter USB memory device USB TYPE B USB TYPE A USB TYPE A USB (A) T ablet Projector Computer Fig.
97 Presentation tools Using the Drawing Function T ouching/clicking Hitachi Pen tablet (ex. TB-1)/USB mouse function key starts up the drawing mode. A tool bar like the fi gure below is displayed on the projector screen while in the drawing mode. T ouching/clicking an icon on the tool bar enables the following functions.
98 (continued on next page) 5. Erase Erases all the lines drawn with the pen. Projector 6. Operation Operates the projector . Calls up and display the previous fi le in the USB memory device from that currently selected. This function is available when the projector is displaying a fi le from a USB memory device.
99 Projector 6. Operation (Continued) T urns of f the projector . T ouch/click the icon for three seconds or so. If you turn the projector off while using the drawing function, • any unsaved drawings will be lost. T oggles between display/hide the Pattern (grid lines).
100 USB Display(W indows computer) The projector can display images transferred from a computer via an USB cable ( 12 ). When you connect your computer to the USB TYPE B port on the projector using a USB cable, the projector will be recognized as a CD-ROM drive on your computer .
101 Presentation tools This application will appear in the Windows notification area once it starts. Y ou can quit the application from your computer by selecting “Quit” on the menu. • The “LiveViewer” (refer to the Network Guide ) and this application cannot be used at the same time.
102 Presentation tools Display : The Floating menu is displayed, and the icon disappears from the Windows notification area. Quit : The application is closed, and the icon disappears from the Windows notification area. The menu shown in the right will be displayed when you right-click the application icon in the Windows notification area.
103 Presentation tools If you select the Option button on the Floating menu, the Options window is displayed. Optimize P erf or mance The “LiveV iewer Lite for USB” captures screenshots in JPEG data and sends them to the projector . The “LiveV iewer Lite for USB” has two options that have different compression rate of JPEG data.
104 USB Display(Mac computer) The projector can display images transferred from a computer via an USB cable ( 12 ). • The image transmission from the computer is suspended while the password-protected screen saver is running. T o resume the transmission, exit the screen saver .
105 Presentation tools • The “LiveViewer” (refer to the Network Guide ) and this application cannot be used at the same time. If you connect your computer to the projector by using a USB cable while the “LiveV iewer” is running, the following message will be displayed.
106 Presentation tools USB Display(Mac computer) (continued) Menu If you select “Display” on the Right-Click menu, the Floating menu shown in the right will appear on your computer screen. q Start capture button The transmission to the projector is started and the images will be displayed.
107 Presentation tools If you select the Option button on the Floating menu, the Options window is displayed. Optimize P erf or mance The “LiveV iewer Lite for USB” captures screenshots in JPEG data and sends them to the projector . The “LiveV iewer Lite for USB” has two options that have different compression rate of JPEG data.
108 Maintenance Maintenance A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
109 Maintenance Lamp war ning Replacing the lamp (continued) HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ► The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.
11 0 Maintenance The air filter unit of this projector consists of a filter cover , two kinds of filters, and a filter frame. The new double large filters system is expected to function longer . However , please check and clean it periodically to keep ventilation needed for normal operation of the projector .
111 Maintenance Cleaning and replacing the air filter (continued) 9. T urn the projector on and reset the filter time using the FIL TER TIME item in the EASY MENU. ►Before taking care of the air filter , make sure the power cable is not plugged in, then allow the projector to cool sufficiently .
11 2 Maintenance Other car e In order to ensure the safe use of your projector , please have it cleaned and inspected by your dealer about once every year . 1. T urn the projector of f, and unplug the power cord. Allow the projector to cool sufficiently .
11 3 T roubleshooting T roubleshooting If an abnormal operation should occur , stop using the projector immediately . Otherwise if a problem occurs with the projector , the following checks and measures are recommended before requesting repair . If this does not resolve the problem, please contact your dealer or service company .
11 4 Message Description The internal temperature is rising. Please turn the power off, and allow the projector to cool down at least 20 minutes. After having confirmed the following items, please turn the power ON again.
11 5 T roubleshooting R e gar ding the indicator lamps When operation of the LAMP , TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER indicator LAMP indicator TEMP indicator Description Lighting In Orange T urned off T urned off The projector is in a standby state.
11 6 T roubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red T urned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the projector to cool down at least 20 minutes.
11 7 • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off.
11 8 T roubleshooting R esetting all settings When it is hard to correct some wrong settings, the F ACTOR Y RESET function of SER VICE item in OPTION menu ( 66 ) can reset all settings (except settings such as LANGUAGE, LAMP TIME, FIL TER TIME, FIL TER MESSAGE, SECURITY and NETWORK) to the factory default.
11 9 T roubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables.
120 Phenomenon Cases not involving a machine defect Reference page No pictures are displayed. (continued) The projector does not recognize the USB storage device inserted into USB TYPE A port.
121 Phenomenon Cases not involving a machine defect Reference page Some kind of image degradation such as flickering or stripes appear on screen. When the projector is operating in Eco mode, flickering may appear on screen. Set ECO MODE to NORMAL, and set AUTO ECO MODE to OFF , in the SETUP menu.
122 • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.
123 Specifications Specifications Please see the Specifications in the User ’ s Manual (concise) which is a book. End User License Ag reement for the Projector Software • Software in the projec.
デバイスHitachi CP-X4015WNEFの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hitachi CP-X4015WNEFをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHitachi CP-X4015WNEFの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hitachi CP-X4015WNEFの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hitachi CP-X4015WNEFで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hitachi CP-X4015WNEFを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHitachi CP-X4015WNEFの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hitachi CP-X4015WNEFに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHitachi CP-X4015WNEFデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。