HitachiメーカーDV-RX5000Uの使用説明書/サービス説明書
ページ先へ移動 of 62
Region number supported by th is unit Region numbers are allocated to D VD pla yers and software according to where they are sold. ≥ The region number of this unit is “ 1 ”. ≥ The unit will play D VDs marked with labels containing “ 1 ” or “ ALL ”.
2 Getting started . CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORM- ANCE OF PROCEDURES O THER THAN THOSE SPECI- FIED HEREIN MA Y RESUL T IN HAZARDOUS RADIA TION EXPOSURE. DO NO T OPEN CO VERS AND DO NOT REP AIR Y OUR- SELF .
3 Getting started IMPOR T ANT SAFETY INSTR UCTIONS Read these operating instructions carefully before using the unit. Follo w the safety instructions on the unit and the applicabl e saf ety instructions listed below . Keep these operating instructions handy for future reference .
4 Getting started T able of contents IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Accessories . . . . . . . . . . . . . . .
5 Setting up STEP 1 Antenna and television connections Preparation ≥ Refer to the tele vision’ s operating instructions. ≥ T ur n the television off and disc onnect its AC po wer supply cord.
6 Setting up STEP 2 The remote contro l ≥ Inser t so the poles ( i and j ) match those in the remote control. ≥ Do not use rechargeable type batteries. Do not: ≥ mix old and new batteries. ≥ use different types at the same time. ≥ heat or expose to flame .
7 Setting up Preparation ≥ Confir m that the antenna is connected correctly . ≥ T ur n on the television and select the appropriate video input to suit the connections to this unit. 1 Press [ Í , D V D PO WER] to turn the unit on. 2 Press [ 3 , 4 ] to select the men u lan- guage and press [ENTER].
8 Setting up STEP 4 VCR Plus i guide channel se ttings Set these guide ch annels so you can use VCR Plus i codes for timer recording. Before starting the settings, prepare a char t show- ing the channels, station names, and guide channels. e.g. , 1 Press [SETUP] to show the menus.
9 Setting up 1 Press [SETUP] to show the menus. 2 Press [ 3 , 4 ] to select “Channel” and press [ 1 ]. 3 Press [ 3 , 4 ] to select “Preset Chan- nel Caption” and press [ENTER]. 4 Press [ 3 , 4 ] to select the caption and then press [ 1 ]. Y ou can choose from t he following captions.
10 Setting up Change the setti ngs if your telev ision is: ≥ Widescreen (16:9 aspect ratio) ≥ Progressive – Read y our television’ s operating instr uctions for details . 1 Press [SETUP] to show the men us. 2 Press [ 3 , 4 ] to select “TV Screen” and press [ 1 ].
11 Setting up Disc inf ormation ≥ We recommend using Hitachi Max ell discs as they ha ve been con- firmed to be compatible with this unit. Other discs ma y not perform correctly .
12 Setting up Contr ol reference guide 1 PO WER b utton ( Í , DV D (POWER) ) . . . . . . . . . . . . . . . . . . 7, 14 Press to switch the unit from on to standb y mode or vice v ersa. In standby mode, the unit is still consuming a small amount of power .
13 Setting up U Remote control signal sensor . . . . . . . . . . . . . . . . . . . . . . . . . 6 V Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 W L2 input terminals (L2) . . . . . . . . . . . . . . . .
14 Recor ding Recor ding television pr ograms [RAM] [DVD-R] 1 Press [ Í , D V D PO WER] to turn the unit on. 2 Press [ < OPEN/CLOSE] to open the tray and insert a disc ( ➜ next pa ge). ≥ Press the button again to close the tra y . ≥ It is not possible to record contin uously from one side of a double sided disc to the other .
15 Recor ding [RAM] [DVD-R] Y ou can inser t a car tr idge or non-car tr idge disc. [Note] ≥ Load double-sided discs so the label for the side y ou want to record/play is facing up . ≥ When using 8 cm (3 ″ ) D VD-RAM, remove the disc from the car- tridge and in ser t it, making sure you align it with the groov e.
16 Playing back Pla ying discs [RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3] 1 Press [ Í , D V D PO WER] to turn the unit on. 2 Press [ < OPEN/CLOSE] to open the tray and insert a disc ( ➜ page 15).
17 Playing back [VCD] Switch [D VD , TV] to “ DV D ” and Press the numbered buttons (0, 1 j 9) to select an item. e.g., “5”: [0] ➜ [5] “15”: [1] ➜ [5] [DVD-V] Press [ 3 , 4 , 2 , 1 ] to select an item and press [ENTER]. ≥ Y ou may also be ab le to use the numbered buttons (0, 1 j 9) to select an item.
18 Playing back Other methods of pla y [RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3] During play or while paused Press [ : ] or [ 9 ]. ≥ Press [ D ] or [ E ] on the main unit.
19 Playing back [RAM] [DVD-R] 1 During play Press [TIME SLIP]. 2 Within 5 seconds Press [ 3 , 4 ] to enter the time and then press [ENTER]. Press to alter in one-minute units. Press and hold to alter in 10-minute units. [RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3] During play Press [ 6 ] or [ 5 ].
20 Playing back Marking places to pla y again—MARKER Y ou can mark positions by pres sing [MARKER]. Also use on-screen menus to mark, recall, and clear po sitions. [RAM] [DVD-R] Mark up to 999 positions. The unit records the markers directly onto the disc and they remain intact ev en if y ou remov e the disc.
21 Playing back Using menus to pla y MP3 discs [MP3] This unit can play MP3 files recorded on CD-R/RW with a computer . Files are treated as tracks and f olders are treated as groups . 1 Press [T OP MENU]. 2 Press [ 3 , 4 ] to select the track and press [ENTER].
22 Playing back Pla ying while y ou are rec or ding [RAM] Press [ 1 ] (PLA Y). Play starts from the beginning of the program being recorded. (Time slip indicator lights.) [Note] Sound is not output while fast-f orwarding. [RAM] Y ou can play a progra m pre viously recorded.
23 Playing back Changing audio [RAM] [DVD-V] [V CD] Y ou can change the audio being received or pla yed. Press [A UDIO]. How the type changes depends on when you press the b utton.
24 Timer recording Timer recor ding [RAM] [DVD-R] This is a simple wa y of specifying a time to stop recording when you are in a hurry or be fore y ou go to bed.
25 Timer recording Y ou can enter up to 16 programs up to a month in advance. Each daily or weekly program is counted as one program. 1 Press [PROG/CHECK]. 2 Press [ENTER]. 3 Press [ 1 ] to mo ve through the items and change the items with [ 3 , 4 ]. ≥ The current settings are shown each time you press [ 1 ].
Timer recording 26 Timer recor ding [RAM] [DVD-R] 1 Press [PR OG/CHECK]. Icon explanations W The times ov erlap those in a nother program. Note the follo wing if times overlap: The program with the earlier star t time receives priority . Recording of the program with the later star t time star ts when the earlier program finishes recording.
27 Editing Entering text [RAM] [DVD-R] This page shows how to enter te xt f or : ≥ Program titles f or timer recording ( ➜ pages 24 and 25) Program titles ( ➜ page 32) ≥ Play list titles ( ➜.
28 Editing Creating pla y lists [RAM] Specify star t and end points to create scenes, then specify the order in which they are to be pla yed. These scenes are not recorded sep- arately so this doesn’t use much capacity . Y ou can create a maximum of 99 play lists and 999 scenes.
29 Editing 1 While stopped Press [PLA Y LIST]. 2 Press [ 3 , 4 ] to select the play list and press [ENTER]. ≥ Y ou can also select play list s b y entering a 2-digit number with the numbered buttons. e.g., “5”: [0] ➜ [5] “15”: [1] ➜ [5] All the scenes in the play list are pla yed.
30 Editing Editing pla y lists [RAM] Once a play list has been er ased, it is irretriev able . Chec k carefully before proceeding. The copied play list appears at the bottom of the list. Play Scenes Operation While stopped Press [PLA Y LIST]. T o clear the pla y list or scene list screen Press [PLA Y LIST].
31 Editing Repeat to erase other scenes. Press [ , ] to select “Exit ” and press [ENTER]. The new scene is inser ted before the highlighted scene. Press [ , ] to select “Ne xt ” and press [ENTER]. (Repeat to add other scenes.) Repeat to move other scenes.
32 Editing Editing pr ograms Erase Program 0 : 58 SP Erase Cancel Corresponding PLA Y LIST will also be erased. Remaining Recording Time Protection Ye s No Set up Program Protection. RETURN ENTER SELECT Shorten Segment – : – – . – – Start – : – – .
33 Editing The disc’ s availab le recording time may not increase after erasing short programs. Computer data cannot be erased. The a vailab le recording time on D VD-R does not increase when you erase prog rams. The lock symbol appears when the program is write- protected.
34 Editing Disc setting Enter Title If set, this will protect the disc from accidental erasure. Disc Protection Format Finalize (D VD-R recorded on this unit only) Y ou can play D VD-R on compatible D VD players b y finalizing them on this unit, effectiv ely making them into D VD-Video.
35 Editing The lock symbol appears closed when the disc is write-protected. Press [ 2 ] to set disc protection and press [ENTER]. [Note] Computer data cannot be erased.
36 Adv anced operat ion Using on-screen menus 1 Press [DISPLA Y]. e.g., DVD-RAM 2 Press [ 3 , 4 ] to select the menu and press [ 1 ]. 3 Press [ 3 , 4 ] to select the item and press [ 1 ]. 4 Press [ 3 , 4 ] to select the setting. T o c lear the on-scr een menus Press [DISPLA Y].
37 Adv anced operat ion e.g., D VD-RAM Not av ailable when pla ying Video CDs, CDs and MP3 discs. e.g., D VD-Video Pla y menu Disc Video Audio Play Repeat pla y Marker OFF † † † † † † † .
Adv anced operat ion 38 Using on-screen menus Not av ailable when pla ying CDs and MP3 discs. [RAM] [DVD-R] [DVD-V] [VCD] ∫ When you have set “TV T ype” to “Aspec t 4:3 & 480P” or “Asp.
39 Adv anced operat ion On-screen displa ys Displays appear on the tele vision when y ou operate the unit to let you kno w what operation was perf ormed and what condition the unit is in. ≥ Y ou can change the setting in the SETUP menu so the first displa y does not appear automatically ( ➜ page 47, Display—Status Mes- sages).
40 Adv anced operat ion Home Theater Refer to the rele v ant pages for details. Other uses Record to digital recording equipment or cassette deck ( ➜ page 42) Record from a video cassette recorder (.
41 Adv anced operat ion ≥ The equipment connections described are examples. ≥ P eripheral equipment and optional cables sold separately unless otherwise indicated. ≥ Before connection, turn off all equipment and read the appropr iate operating instr uctions.
Adv anced operat ion 42 Home Theater This model can play Dolb y Digital, but only in tw o channels. This model does not ha v e a DTS decoder . Y ou must connect a unit wi th a Dolby Digital or DTS decoder to enjo y surround sound.
43 Adv anced operat ion § By using the S video cable instead of the yellow video cab le you may mak e recordings of higher picture quality . [Note] If the audio output of the other equipment is monaural, connect to L/ MONO . (Both left and right channels are recorded when connected through L/MONO .
44 Adv anced operat ion Other antenna connections Use one of the follo wing connections to suit the antenna lead. ∫ A single twin lead ∫ A twin lead and a coax ial cable ∫ T wo twin leads ≥ If your television has both lead and coaxial VHF ter minals, use the lead connection to mi nimize signal loss.
45 Adv anced operat ion Changing the remote contr ol code Hitachi D VD players and recorders use the same remote control system so they ma y respond unintentionally to a command from this remote control. Change the code on this unit and its remote control (the two must match) if you place equipment close together .
46 Adv anced operat ion Changing the unit’ s settings This chart shows the initial sett ings for this unit. See page 48 for details on menu operation. ≥ Underlined items are the factor y presets. Summary of settin gs T abs Menus Options Channel Antenna System ( ➜ page 7) Select to suit the type of antenna you are using.
47 Adv anced operat ion Video Still Mode Select the type of picture shown when you pause pla y . ≥ Automatic ≥ Field: Less blurred field stills are shown. Select if jittering occurs when “Automatic” is selected. ≥ Fra m e : Shar per frame stills are shown.
Adv anced operat ion 48 Changing the unit’ s settings See page 46 for menu and option details. 1 While stopped Press [SETUP] to show the menus. 2 Press [ 3 , 4 ] to select the menu’ s tab and press [ 1 ]. 3 Press [ 3 , 4 ] to select the menu and press [ENTER].
49 Adv anced operat ion Preparation If you connect the unit through a cab le TV bo x or DSS receiver ( ➜ page 41), tune to your local PBS station before starting auto clock setting. Use man ual clock setting if auto cloc k setting does not work or if there is no local PBS channel in your area.
50 Reference Glossary Bitstream This is the digital f orm of multi-channel audio data (e.g., 5.1 chan- nel) before it is decoded into its v arious channels. CPRM (Content Protection for Recor dable Media) CPRM is the copy right protection technology that is used to protect broadcasts that are allowed to be recorded only once (e .
51 Reference Err or messages On the t elevision Page On the u nit’ s display No disc. ≥ Y ou hav en’t inser ted a disc. Correctly in ser t a disc that this unit can use. ≥ The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
52 Reference T r oubleshooting guide Before requesting service, make the belo w checks . Po w e r Pag e Operation Picture ≥ When progressive output is on, ref er also to “ Progressive video ” below . Progressive video No power . ≥ Inser t the AC power supply cord securely into a known activ e AC outlet.
53 Reference Sound Pag e Play Displ ays Remote control No sound. Low v olum e. Distorted so und. ≥ Check the connections . Check the input mode on the amplifier if you ha ve connected one . ≥ T ur n V .S .S. off if it causes distortion. 5, 41–43 37 Cannot hear the desired audio type.
Reference 54 T roubleshooting guide Recording and timer recording Pag e The precision par ts in this unit are readily affected b y the en vi- ronment, especially temperature, humidity , and dust. Cigarette smoke also can cause malfuncti on or breakdown.
55 Reference Specifications Recording system: D VD video recording standards (D VD-R AM), D VD video standards (D VD-R) Optical pick-up: System with 1 lens, 2 integ ration units (662 nm wa v elength for D VDs, 790 nm wa velength f or CDs) Recordable discs: 12 cm (5 q ) 4.
56 Español Instalación básica Preparación ≥ Confirme que la antena esté conectada correctamente. ≥ Encienda el televisor y seleccione en él la entrada de vídeo apropiada para ajustar las cone xiones realizadas al aparato . 1 Pulse [ Í , D VD PO WER] para encender el aparato.
57 Español Ajuste esta guía de canales d e manera que pueda utilizar los códigos i VCR Plus para la grabación con temporizador . 1 Pulse [SETUP] para visualizar los menús. 2 Pulse [ 3 , 4 ] para seleccionar “Canal” y pulse [ 1 ]. 3 Pulse [ 3 , 4 ] para seleccionar “VCR Plus r Ajuste canal” y pulse [ENTER].
58 Español Grabación de programas de tele visión [RAM] [DVD-R] 1 Pulse [ Í , D VD PO WER] para encender el aparato. 2 Pulse [ < OPEN/CLOSE] para abrir la bandeja e introduzca un disco ( ➜ siguiente página). ≥ V uelva a pulsar el botón para cerrar la bandeja.
59 Español [RAM] [DVD-R] Puede introducir un disco con o sin estuche. [Note] ≥ Cargue discos de doble cara de manera que la etiqu eta de la cara que desee grabar/reproducir quede mirando hacia arriba. ≥ Al utilizar D VD-RAM de 8 cm (3 ″ ), retire el disco del estuche e introdúzcalo , asegurándose de que quede alineado con la ranura.
60 Español Repr oducción de discos [RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3] 1 Pulse [ Í , D VD PO WER] para encender el aparato. 2 Pulse [ < OPEN/CLOSE] para abrir la bandeja e intr oducir un disco ( ➜ página 59). ≥ V uelva a pulsar el botón para cerrar la bandeja.
61 Español [VCD] Interruptor [D VD , TV] a “ DV D ” y Pulse los botones numerados (0 , 1 j 9) pa ra seleccionar un elemento. por ejemplo., “5”: [0] ➜ [5] “15”: [1] ➜ [5] [DVD-V] Pulse [ 3 , 4 , 2 , 1 ] para sele ccionar un elemento y pulse [ENTER].
62 Index Angle . . . . . . . . . . . . . . . . . . . . . . . . 36 Antenna system . . . . . . . . . . . . . . . . 7 Audio attribute . . . . . . . . . . . . . . . . 36 Channel captio n . . . . . . . . . . . . . . . . 9 Channel setting . . . . . . . . . .
デバイスHitachi DV-RX5000Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Hitachi DV-RX5000Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHitachi DV-RX5000Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hitachi DV-RX5000Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hitachi DV-RX5000Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hitachi DV-RX5000Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHitachi DV-RX5000Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hitachi DV-RX5000Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHitachi DV-RX5000Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
