HitachiメーカーL26H01U L26HR1Uの使用説明書/サービス説明書
ページ先へ移動 of 40
L 26 H 0 1U GB Instructi ons for use Digital LCD olo r T elevision Cu L26HR1U Downloaded From TV-Manual.com Manuals.
- 1 - Contents Parental Settings .......................................... 18 Timer s ............................................................... 18 Recording From IDTV ................................... 1 9 Language ............................
- 2 - Install Menu ....................................................... 24 Program T abl e .............................................. 25 N a m e ................................................................... 25 Ins er t ...................
- 3 - Safety Precautions Please read the following recommended safety pre- cautions carefully for your safety . IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV Dos and Donts DOs This T elev.
- 4 - 1.Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience. 2.Power Cord Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord.
- 5 - 13. T o prevent injury , this device must be securely attached to the wall in accordance with the in- stallation instructions when mounted to the wall (if the option is available). 14. Connection to a television distribution system (Cable TV etc.
- 6 - Features Remote controlled colour LCD TV . Fully integrated Digital TV (DVB-T) 100 programmes from VHF , UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system.
- 7 - LCD TV Front View Rear View and Peripheral Connections S-VIDEO Input Video Input Audio Inputs Headphone Audio Line Outs Subwoofer Out Power Cord Input Power On/Off Switch HDMI Input 2 HDMI Input.
- 8 - Remote Control Buttons ** These buttons can control most Hitachi DVD Players and Recorders. = S tand by On/Off = Info DVD = Select DVD TV/DTT = Selector button for Digital/Analogue mode = Hold i.
- 9 - Preparation For ventilation, leave a space of at least 10 cm free all around the set. T o prevent any fault and unsafe situ- ations, please do not place any objects on top of the set. Use this apparatus in moderate climates. Before Switching On Y our TV Power Connection IMPORT A N T : The TV set is designed to operate on 220-240V AC, 50 Hz.
- 10 - Switching The TV ON/OFF T o switch the TV on Y our TV will switch on in two steps : 1- Connect the power cord to the system. Press Power On/Off switch.
- 11 - $XWR 3UR JUD P By pressing _ / ` button, adjust the Country item and press b to highlight Language item. Use _ / ` button to set Language . Use _ / ` buttons to select T X T Language and set it by using _ / ` buttons.
- 12 - Everyday Operation Pressing the button at any time while watch- ing television programmes will switch the TV set be- tween displaying the digital terrestrial television broad- casting and its normal analogue broadcasting.
- 13 - If you press button you can see the detailed help information easily . And by pressing button again you can exit Help menu. The starting time for EPG is the current time.Y ou can see the event information for the next two hours. By pressing a / b button, you can go to the next/ previous hours while Programmes list is highlighted.
- 14 - IDTV Menu System The IDTV menu can only be shown when watching Digital terrestrial broadcasting. Press the but- ton to turn IDTV on while TV is in analogue mode.
- 15 - Now pressing _ / ` button moves to the previous/ next character. Pressing a / b button toggles the current character, i.e., b character becomes a by b and c by a .
- 16 - Installation The Installation menu mainly intends to help you for building a Channel T able in the most efficient way . 0DLQ0 HQX This menu includes the following items: 1.
- 17 - First of all choose Language,Country and TXT Lan- guage by using a / b and _ / ` buttons. This will affect the sort process in APS. T o start APS press OK button: $36L VU XQ QLQ J After APS is finalized, the programme table will ap- pear on the screen.
- 18 - There are two possibilities for Receiver software to be upgraded: automatic and manual . Automatic Download (Automatic upgrade) Automatic Download can be enabled or disabled by pressing _ / ` button. If it is enabled, then there are two ways for automatic upgrade.
- 19 - Up to five separate timer events can be set and each is displayed in the Timer screen, showing the event number , the channel to be selected, the start time, end time, date and the mode - whether that event is active (and will be acted on) or not.
- 20 - TV Setup T o be able to go through TV functions, you can use this item. The digital TV Setup menu screen is accessed from the main menu. Press the button to display the main menu and use a / b button to highlight TV Setup , press the OK button to display TV Setup menu screen.
- 21 - Analogue TV Menu System Picture Menu 3,&785 ( In the picture menu; if PC, YPbPr or HDMI modes is selected, resolution information is displayed at the bottom of the menu OSD. Mode By pressing a / b button, select Mode . Press _ / ` button to choose from one of these options: Cinema, Dynamic and Natural.
- 22 - Note: Equalizer menu settings can be altered only when the Equalizer Mode is in User . Balance By pressing a / b select Balance .Press _ / ` button to change the level of the balance.Balance level can be adjusted between -32 and +32. Headphone By pressing a / b button, select Headphone.
- 23 - Feature Menu )($785 ( PIP In the Feature menu, highlight PIP item by pressing a / b buttons. Press ` button to enter PIP submenu: 3,3 PIP ON-OFF Y ou can activate or deactivate PIP mode by pressing _ / ` button. PIP Picture Press ` button to enter PIP Picture submenu.
- 24 - P AP Source Select P A P Source item by using a / b button. Use _ / ` button to set P A P source . Note: When main picture source is TV , AV -1, A V -2 or AV -3, PIP window can only be set to HDMI-1, HDMI-2, A V-5, PC source or vice versa. PA P S WA P Select PA P S W A P item by using a / b button.
- 25 - Program T able By pressing a / b button, select Program T able . Press ` to display Program T able . 3URJUDP 7 DEOH By moving the cursor in four directions you can reach 20 programmes in the same page. Y ou can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except the A V mode).
- 26 - Band Band can be selected either C o r S by press _ / ` button. Channel Channel can be changed by _ / ` button or Digit Buttons. Colour System By pressing a / b button, select Colour System. Press _ / ` button to change the colour system to PA L , SECAM , P AL60 o r AUT O .
- 27 - PC Mode Installation Power off both Computer and Display before making any connections. Set your PCs resolution correctly before connect- ing to the T V . See the t able on Appendix A on page 3 6 . Use 15-pin display cable to connect a PC to the LCD TV .
- 28 - Other Features TV Status Programme Number , Programme Name, Sound Indicator and Zoom Mode are displayed on the screen when a new programme is entered.
- 29 - Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. 4:3 Use to view a normal picture (4:3 aspect ratio) as this is its original shape. 14:9 Zoom This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.
- 30 - Connect Peripheral Equipment High Definition Y our LCD T elevision is capable of displaying High Definition pictures from devices such as a High Defi- nition Satellite Receiver or DVD Player . These devices must be connected via the HDMI socket or Compo- nent Socket.
- 31 - Tips Care Of The Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer . Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.
- 32 - Peripheral Equipment Connections 2XWGRRU $HULDO&RQQHFWLRQ Aerial Connection Downloaded From TV-Manual.com Manuals.
- 33 - Specifications Downloaded From TV-Manual.com Manuals.
- 34 - Specifications Downloaded From TV-Manual.com Manuals.
- 35 - Signal Input PC RGB T erminal (D-sub 15-pin connector) When different kinds of input signals are simul- taneously input to the monitor via a graphics board or the like, the monitor will aut.
- 36 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1360 x 768, frequency range of 56-75 Hz. The following table is an illustration of some of the typical video display modes.
- 37 - Appendix B: Main and PIP-P A P Picture Combinations 0 DLQDQG3, 3 3$3 SLFW X U HFRPEL QD W L RQV Downloaded From TV-Manual.
- 38 - UK Guarantee Your Guarantee of Excellence Thank you for purchasing this Hitachi T elevision. In the unlikely event that this product should develop a fault, we undertake to replace or repair an.
www .hitachidigitalmedia.com Hitachi, Ltd. Consumer Business Group Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, T okyo 100-0004 Japan HIT ACHI EUROPE L TD.
デバイスHitachi L26H01U L26HR1Uの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hitachi L26H01U L26HR1Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHitachi L26H01U L26HR1Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hitachi L26H01U L26HR1Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hitachi L26H01U L26HR1Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hitachi L26H01U L26HR1Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHitachi L26H01U L26HR1Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hitachi L26H01U L26HR1Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHitachi L26H01U L26HR1Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。