Hoist FitnessメーカーRPL-5303の使用説明書/サービス説明書
ページ先へ移動 of 48
RECORD S ERIAL NUMBER HERE OWNER'S MANUAL (800) 548-5438 (858) 578-7676 Customer Service ADDENDUM READ THIS FIRS T! CATA LOG NUM BER 0608-001 RPL-5 3 0 3 A DDENDUM Fax (858) 578-9558 JULY , 2008 .
36 3/4" w/o RUBBER FOOT w/ RUBBER FOOT 37" MAJOR ADJUSTMENT: LOOSEN JAM NUTS (26, 27) AND TWIST TIE RODS (20) IN/OUT TO ADJUST THE PRESS ARM TO THE PROPER HEIGHT. ONCE THE PROPER HEIGHT IS REACHED AND THE PRESS ARMS ARE OF EQUAL HEIGHTS, BE SURE TO RE-TIGHTEN JAMS NUTS.
0608 - 002 OWNER' S MANUA L Customer Service Fax (800) 548-5438 (858) 578-7676 (858) 578-9558 Note: Both Serial Number and Model Nu mber are Required when Ordering Parts RECORD S ERIAL NUMBER HERE CATALOG NU MBER **WARNING !** TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE EXERCISE FLOOR.
OWNER'S MANUA L PAGE 01 RPL-5303 ASSE MBLY INST RUCT IONS ..................................................................... FRA ME ASS EMBLY .............................................................. MACHINE A DJUST MENT..................
OWNER'S MANUA L PAGE 02 RPL-5303 ASSE MBLY Ratch et Wrench 1 / 2" , 9/16" and 3/4" Sockets Adjustable Wrench Rubber Mallet Tape Measure Level Hex K ey Wrench Set Two People TOOLS REQUIRED Before begi nni ng assem bly pl ease take the tim e to read in struction s thorou ghly.
OWNER'S MANUA L PAGE 03 RPL-5303 ASSE MBLY ***THIS PAGE WAS INTENTIONALLY LEFT BLANK***.
OWNER'S MANUA L PAGE 04 RPL-5303 ASSE MBLY FRAM E ASSE MBL Y.
FRAM E ASSE MBL Y PAGE 05 OWNER'S MANUA L - HAND T IGHTEN HARDW ARE. RPL-5303 ASSE MBLY NOTE: - REPEAT A SSEMBLY FOR OPPOSITE SIDE. 3 49 12 28 14 2 58 74 83 58 50.
FRAM E ASSE MBL Y OWNER'S MANUA L - WRENCH T IGHTEN HARDWA RE. RPL-5303 ASSE MBLY NOTE: PAGE 06 72 60 60 57 16 48 18 16 48 72 57.
57 82 32 70 57 63 12 11 18 OWNER'S MANUA L - WRENCH T IGHTEN HARDWA RE. FRAM E ASSE MBL Y PAGE 07 RPL-5303 ASSE MBLY NOTE:.
- HAND T IGHTEN HARDW ARE. NOTE: FRAM E ASSEM BL Y RPL-5303 ASSE MBLY OWNER'S MANUA L PAGE 08 - ROTATE (13) UPWARD INTO PLACE 77 58 83 37 77 58 83 58 3 2 13 12 58 STEP 2: 13 3 STEP 1: - POSITION .
- HAND T IGHTEN HARDW ARE. FRAM E ASSE MBL Y OWNER'S MANUA L PAGE 09 RPL-5303 ASSE MBLY NOTE: 58 58 83 80 13.
58 76 58 36 3 2 83 NOTE: OWNER'S MANUA L HAND TIGHT ENED HARDWA RE. FRAM E ASSE MBL Y - WRENCH T IGHTEN HARDWA RE. RPL-5303 ASSE MBLY PAGE 10 - WRENCH T IGHTEN ALL PREVIOUSL Y.
- WRENCH T IGHTEN HARDWA RE. PAGE 11 OWNER'S MANUA L RPL-5303 ASSE MBLY - REPEAT A SSEMBLY FOR OPPOSITE SIDE. FRAM E ASSE MBL Y NOTE: 57 82 57 69 57 57 69 69 57 57 82 82 8 10 23.
- WRENCH T IGHTEN HARDWA RE. RPL-5303 ASSE MBLY PAGE 12 OWNER'S MANUA L NOTE: FRAM E ASSE MBL Y 12 58 83 81 38 23 58.
OWNER'S MANUA L PAGE 13 LOOSEN NUT JUST ENOUGH FOR ( 1 7) RPL-5303 ASSE MBLY NOTE: - WRENCH T IGHTEN HARDWA RE (79) T HEN TO PIVOT FREEL Y. FRAM E ASSE MBL Y 18 83 58 17 58 83 39 58 79 17 39 79 5.
- WRENCH T IGHTEN HARDWA RE. NOTE: OWNER'S MANUA L RPL-5303 ASSE MBLY PAGE 14 - REPEAT A SSEMBLY FOR OPPOSITE SIDE. FRAM E ASSE MBL Y 19 43 15 83 13.
PAGE 15 OWNER'S MANUA L REMOVED FOR CL ARITY. FRAM E ASSE MBL Y RPL-5303 ASSE MBLY NOTE: - HAND T IGHTEN HARDW ARE. - SOME PART S MAY HAV E BEEN 22 26 TIE ROD END (RH) TIE ROD JAM NUT (RH) 20 JAM.
22 AS SHOWN IN DETAIL. 84 98 BE SURE ORIENTATION OF CAP WASHER (98) 99 RPL-5303 ASSE MBLY PAGE 16 FRAM E ASSE MBL Y - WRENCH T IGHTEN HARDWA RE. OWNER'S MANUA L NOTE: - REFER TO PA GES 26 & 27 FOR SPECIFIC - REPEAT A SSEMBLY FOR OPPOSITE SIDE.
58 62 75 19 62 75 58 4 15 PAGE 17 OWNER'S MANUA L RPL-5303 ASSE MBLY NOTE: - REPEAT A SSEMBLY FOR OPPOSITE SIDE. FRAM E ASSE MBL Y - WRENCH T IGHTEN HARDWA RE.
NOTE: OWNER'S MANUA L - REPEAT A SSEMBLY FOR OPPOSITE SIDE. RPL-5303 ASSE MBLY FRAM E ASSE MBL Y - WRENCH T IGHTEN HARDWA RE. PAGE 18 57 73 73 60 42 60 54 2 54 42 3 57.
PAGE 19 OWNER'S MANUA L RPL-5303 ASSE MBLY NOTE: - WRENCH T IGHTEN HARDWA RE. FRAM E ASSE MBL Y 5 24 56 67.
23 9 MAKE SURE THE ORIENTATION OF PULL PIN (9) IS AS SHOWN. 23 68 9 24 FRAM E ASSEM BL Y NOTE: - WRENCH T IGHTEN HARDWA RE. OWNER'S MANUA L RPL-5303 ASSE MBLY PAGE 20.
OWNER'S MANUA L REMOVED FOR CL ARITY. FRAM E ASSE MBL Y PAGE 21 RPL-5303 ASSE MBLY - WRENCH T IGHTEN HARDWA RE. NOTE: - SOME PART S MAY HAV E BEEN 45 35 65 56 7.
FRAM E ASSE MBL Y - WRENCH T IGHTEN HARDWA RE. - SOME PART S MAY HAV E BEEN OWNER'S MANUA L PAGE 22 NOTE: REMOVED FOR CL ARITY. RPL-5303 ASSE MBLY 60 57 45 69 60 57 69 23.
65 56 44 6 66 34 OWNER'S MANUA L PAGE 23 RPL-5303 ASSE MBLY NOTE: REMOVED FOR CL ARITY. FRAM E ASSE MBL Y - SOME PART S MAY HAV E BEEN - WRENCH T IGHTEN HARDWA RE.
NOTE: OWNER'S MANUA L RPL-5303 ASSE MBLY PAGE 24 - SOME PART S MAY HAV E BEEN FRAM E ASSE MBL Y - WRENCH T IGHTEN HARDWA RE. REMOVED FOR CL ARITY.
RPL-5303 ASSE MBLY OWNER'S MANUA L PRE-A SSEMBLY PAGE 25 NOTE: - WRENCH T IGHTEN HARDWA RE. - SOME PART S MAY HAV E BEEN REMOVED FOR CL ARITY. - WRENCH T IGHTEN ALL PREVIOUSL Y HAND TIGHT ENED HARDWA RE. 59 55 1 *I MPO RTAN T* 3 ASS URE THAT Y OUR UNIT IS AS SEMBLED SQUA RE AND PERPENDICULAR.
53 12 STEP 1: MAJOR ADJUSTMENT: STEP 1: BE SURE THE BOTTOM DUAL HOLE BUMPER (53) OF THE LIFT ARM ASSEMBLY REMAINS IN CONTACT WITH THE BASE FRAME ASSEMBLY (12), AS SHOWN. STEP 2: ADJUST HEIGHT OF THE LIMITING STOP ASSEMBLY (14) SO THAT IT IS IN CONTACT WITH THE DUAL HOLE BUMPER (53), AS SHOWN.
w/ RUBBER FOOT 37" 36 3/4" w/o RUBBER FOOT MAJOR ADJUSTMENT: LOOSEN JAM NUTS (26, 27) AND TWIST TIE RODS (20) IN/OUT TO ADJUST THE PRESS ARM TO THE PROPER HEIGHT. ONCE THE PROPER HEIGHT IS REACHED AND THE PRESS ARMS ARE OF EQUAL HEIGHTS, BE SURE TO RE-TIGHTEN JAMS NUTS.
PRE-A SSEMBLY RPL-5303 ASSE MBLY OWNER'S MANUA L PAGE 28 53 31 31 15 30 29 53 58 83 98 101 47 99 100 98 18 29 30 78 58 53 98 100 99 71 61 40 25 25 51 30 46 99 58 83 23 41 30 29 29 24 71 61 40 47 .
95 91 87 94 93 88 92 91 96 97 93 89 85 90 92 86 OWNER'S MANUA L PAGE 29 UNLESS OTHERWISE ST ATED. - ALL DECALS A RE CENTERED DECAL PLA CEMENT RPL-5303 ASSE MBLY NOTE:.
OWNER'S MANUA L RPL-5303 ASSE MBLY PAGE 30 DECA L REFERENCE 021-0003405 021-0003135 SERIAL # DECAL 021-0003341 021-0003320 021-0003113 021-0003093 021-0003008.
PAGE 31 OWNER'S MANUA L RPL-5303 ASSE MBLY DECA L REFERENCE CO NTINUED 021-0003693 021-0003334 021-0018022 021-0003230 021-0004032.
OWNER'S MANUA L PAGE 32 RPL-5303 ASSE MBLY ***THIS PAGE WAS INTENTIONALLY LEFT BLANK***.
ITEM NO. PART NUMBER DESCRIPTION QTY 1 026-01PL2236 TOP CAP W/INSERTS 1 2 026-01X3294 REAR UPRIGHT LEFT ASSEMBLY 1 3 026-01X3377 REAR UPRIGHT RIGHT ASSEMBLY 1 4 026-01M2358 30 LB.
OWNER'S MANUA L RPL-5303 ASSE MBLY PAGE 34 PART LIST CO NTINUED NOT E: SOME OF T HESE PART S MAY C OME PRE-INSTALLED ITEM NO. PART NUMBER DESCRIPTION QTY 36 026-01F0251 BRACKET PLATE: 2 HOLES 7.00" X 2.75" 1 37 026-01F0316 8" FLNG.
ITEM NO. PART NUMBER DESCRIPTION QTY 71 011-0401002 3/8"-16UNC X 1.25" BHCS (SS) 2 72 011-0101034 3/8"-16UNC X 1.25" BHCS (WZ) 2 73 011-0101016 3/8"-16UNC X 2.75" BHCS (WZ) 4 74 011-0407042 1/2"-13UNC X 1.00" HHB (WZ) 4 75 011-0101020 1/2"-13UNC X 1.
PAGE 36 OWNER'S MANUA L S HCS = S o cket He ad Cap S crew RPL-5303 ASSE MBLY SHS S = Socket Head Shoulder S crew B Z = Bl ack Zinc W Z = White Zinc HHB = Hex Hea d Bo lt FHCS = Fla t Head Cap S c.
3 3/4" OWNER'S MANUA L PAGE 37 RP L-5303 ASSEMB LY 5 1/4" 4 1/4" 4 3/4" 5" 5 1/2" 4" 4 1/2" 4 3/4" 5" 5 1/2" 4" 4 1/2" 5 1/4".
OWNER'S MANUA L PAGE 38 RPL-5303 ASSE MBLY 3" 3/8" BHCS 1/4" HHB 0" 1" 1 1/ 4" 3/4" 1 1/ 2" 0" 1" 0" 1/ 2" FHC S 0" 3/8" FHCS.
OWNER'S MANUA L PAGE 39 RPL-5303 ASSE MBLY 013-0002003 1/ 4" FLAT WASHER SMALL, SAE, 13mm 013-01 02026 1/ 2" FLAT WASHER LARGE, USS, 34mm 014-001 8001 1/2" LONG SPACER 3/8" FE.
OWNER'S MANUA L PAGE 40 RPL-5303 ASSE MBLY 026-01M021 1 1/ 4" LO NG FLANGED SPACER 026-01M01 98 1/2" LONG FLANGED SPACER 026-01M0760 1/2" LONG HEAVY FLANGED SPACER 026-01M21 1T 1/4" LON G HEAVY FLANGED SPACER 026-01M0532 11/ 16" L ON G HE AV Y FLANGED SPACER 026-01M0551 1" LONG HEAVY FLANGED SPACER 026-01M0788 .
OWNER'S MANUA L PAGE 41 RPL-5303 ASSE MBLY Your equipment comes with a comme rcial maintenance decal. For pers onal, in home us e, please f ollow t he home maint enance sch edule l isted above.
OWNER'S MANUA L PAGE 42 RPL-5303 ASSE MBLY HOIST FITNESS SY STEMS GENERAL MA INTENA NCE INFORMA TION Links, Pull -Pins, Snap Hooks, Swivels, Weight Stack Pins: *Check all pieces for sign s of visible wear or damage. *Check springs in snap hooks and pu ll-pins for proper tension an d alignmen t.
OWNER'S MANUA L PAGE 43 RPL-5303 ASSE MBLY Alwa ys con su lt you r p hysi ci an b efore starti ng an y exerci se p rog ram . To be suc cess ful in you r exer ci se pr ogra m, i t is im por tant to deve lop an und erstanding of the basi c princi ples of strength train ing .
Exercise OWNER'S MANUA L RPL-5303 ASSE MBLY PAGE 44 Totals S = Sets R = Repetitio n per set W = Weight used Date RR W SR W WS R WS SR RW WS SR W WS W S R RW S RS R W WS R WEI GH T TR AIN I NG EXE.
OWNER'S MANUA L RPL-5303 ASSE MBLY PAGE 45 HOIST FI TNESS SYSTEMS LIMITED LIFETIME WARRANTY H o is t Fitn es s Sy ste ms w a rra nts th is p ro duc t to th e origin al purch aser to be free f rom de f ects in workm anship and/ or m ater i als under norm al use or servi ce.
デバイスHoist Fitness RPL-5303の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Hoist Fitness RPL-5303をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHoist Fitness RPL-5303の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hoist Fitness RPL-5303の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hoist Fitness RPL-5303で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hoist Fitness RPL-5303を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHoist Fitness RPL-5303の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hoist Fitness RPL-5303に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHoist Fitness RPL-5303デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
