Hondaメーカー2010 Accord Crosstourの使用説明書/サービス説明書
ページ先へ移動 of 156
Navigation System 1 Table of Contents Introduction .................................. 4 Manual Overview .................... ..... ... 4 System Overview .................... ..... ... 4 Accessories Precautions .................. 5 Important Safety Information .
2 Navigation System Table of Contents Landmark Icons ... .................... ..... . 5 8 Showing Icons on the Map... .. .......... 60 Icon Options ................ .. ......... .. ....... 60 Going Off the Route . .................... . 62 Off-road Tracking .
Navigation System 3 Table of Contents Rearview Camera ................... .... 101 Visible Range of the Rearview Image ......... .......... .......... ........... .. 101 Rearview Camera Brightness Adjustme nt ........ .......... ....... ......... 102 System Initialization .
4 Navigation System Introduction Manual Overview The manual is divided into the following sections: • Getting Started - A basic introduction that discusses the controls and how to communicate with the system. • Entering a Destination - How to enter an address or locate a point of interest (POI).
Navigation System 5 Introduction The navigation system applies location, direction, and speed information to the maps and calculates a route to the destination you enter. As you drive to that destination, the system provides map and voice guidance. The navigation system is easy to use.
6 Navigation System While driving, do not look at the screen or operate the system controls for more than a second or so at a time, and only after deciding you can do so safely. Pull to the side of the road if you need more time to look at the screen or operate the controls.
Navigation System 7 Introduction Verified streets (dark colore d) Unverified streets (light colored) When displayed These roads are found within metropolitan areas, and include interstate freeways and major roads connecting cities. These roads are found in rural areas, and typically include residential stre et s away fr om the center of a town.
8 Navigation System User Agreement In using this DVD “Satellite Linked Navigation System” (the “DVD”), which includes HONDA MOTOR CO., LTD. software, ALPINE ELECTRONICS, INC. software, NAVTEQ database contents, INFO USA CORPORATION database, ZAGAT SURVEY database contents, and ZENRIN CO.
Navigation System 9 User Agreement • The terms and conditions hereof apply to all subsequent users and owners as well as to the original purchaser. • The logos of oil comp anies, hotels, convenien.
10 Navigation System Getting Started System Controls CANCEL button SETUP button INFO button Interface Dial/ ENTER button MENU button AUDIO button MAP/GUIDE button Lower Display Screen Display Mode but.
Navigation System 11 Getting Started Display Mod e button Displays the Brightness control on the bottom of the screen. You can adjust the brightness of the screen by rotating the Interface Dial knob . When the Brightness control is displayed, e ach press of this button switches the displ ay between Day mo de, Night mode, and OFF.
12 Navigation System Getting Started Screen All selections and instruct ions are displayed on the screen. In addition, the display is not a “touch screen” - y ou can enter information into the system either by voice or by using the Interface Dial .
Navigation System 13 Getting Started Voice Control Basics Your vehicle has a voice control system that allows hands-free oper ation of most of the navigation system functions .
14 Navigation System Getting Started Using the Voice Control System You should use the v oice control system as much as possible, and consider manual entry using the Interface Dial as a backup method of entry. Most of the system’s functions can be controlled by voice commands activated with the NAVI TALK button.
Navigation System 15 Getting Started • If more than one person is speaking at the same time, the system may misinterpret your command. • After pressing and re leasing the NAVI TALK button, wait for the beep, then give a voice command while the icon is displayed on the top left of the screen .
16 Navigation System Getting Started Entering Information When the system needs input from you, the display changes to a screen similar to the one at the right.
Navigation System 17 Getting Started System Start-up When you turn the ignition to ON (II), it takes several seconds for the navigation system to bo ot up. The first screen to appear is the navigation system globe screen. The screen then changes to the Disclaimer screen: NOTE: The OK button does no t ap pear immediately.
18 Navigation System Getting Started If you press the CANCEL button, the message will be displayed the next time you start the vehicle. NOTE: The system will display the current message and any old er or previously unread messages, with the newest message listed first.
Navigation System 19 Getting Started Map Screen Legend Acura Dealer School Restaurant AT M P arking Lot P ost Office Honda Dealer Hospital Grocer y Store Gas Station Hotel/Lodging P arking Garage F re.
20 Navigation System Getting Started Map Screen Description Zoom In/Out Rotate the Interface Dial knob to change the map scale. Zooming in increases the detail, while zooming out gives you a wide a rea view. After changing the scale, give the system a few moments to update the display.
Navigation System 21 Getting Started System Function Diagram This diagram shows th e navigation system features, starting at the ce nter and working outward in lay ers. The navigation program starts at “Key ON,” and then displays th e globe screen (blue).
22 Navigation System When you press the MENU bu tton, th e display changes to: NOTE: If you press the MENU button while en route, the MENU screen ( Route ) will be displayed. To enter the destination, select the “Enter destination by” tab by moving the Interface Dial to the left.
Navigation System 23 By Address After you select Address from the MENU screen ( Enter destination by ), the display changes to: Tip: • When entering an address by voice, it is more efficient to say the city name first, then the street name. • When entering an ad dress by the Interface Dial , it is usually easier to enter the street first.
24 Navigation System To enter the city name by voice spelling, say or select CHANGE TO SPELL MODE on the Say city name scre en, and the display will change to the Enter city name screen. Say the city name by saying individual letters, or words that represent the letters, one at a time.
Navigation System 25 If the system does not find an exact match, select LIST when you finish entering the name of the city. Most of the cities and towns for that s tate are listed. Listings of cities and towns in the non- detailed coverage area m ay have an asterisk “*” next to their names.
26 Navigation System The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you. For example, if you say “E” but the system does not recognize t.
Navigation System 27 Entering the Street Number After you have completed the street name, the display changes to the Enter street number screen. Use the voice control system and say the address number as a continu ous string of numbers. For ex ample, the address 1 527 should be spoken as “One, five, two, seven.
28 Navigation System The system then displays a list of the places entered in your personal Addres s Book. By using the Interface Dia l , you can sort the displayed addresses by ALL , BUSINESS , PERSONAL , or by other categories you may cr eate. Scroll through the lis t to find your desired destin ation.
Navigation System 29 • The second best method is to select Category , Restaura nt , and CAFÉ/ COFFEE SHO P . After you select Place Name by Keyword and search method, enter the keyword “Bucks.” The list will include all restaurants that have the letters “bucks” anywhere in the name.
30 Navigation System Auto Service Lodging Shopping Honda Dealers Auto Repair & Maintenance Bed & Breakfast Resort All Shopping*2 Office Supplies/Electronics Acura Dealers Car Wash & Detail.
Navigation System 31 Finding a restauran t The ZAGAT SURVEY for some restaurants is available in the system. See the Information screen, “Key to Zagat Ratings” for an explanation of these ratings (see page 75 ). On the Select a place screen, restaurants with a Zagat Rating have a icon at the end of the line.
32 Navigation System Place Name by Keyword If you do not know the exact na me of the destination, you can find the place with a keyword. When you select this option, the d isplay changes to: You can find your des tination with a keyword using the Sort b y Distance to Travel option or City Vicinity option.
Navigation System 33 City Vicinity The system allows you to find points of interest in the vicinity of the city you entered. When yo u select this option, the display changes to the Enter city name screen. Enter the name of the city using the Interface Dial .
34 Navigation System Finding the Place by Zagat 2009 The ZAGAT 2009 option allows you to find a restaurant by the Zagat Rating information. The system lets you select the metro area, neig hborhood, and foo d type to search the restaurant you like.
Navigation System 35 By Intersection After you select Intersection from the MENU screen ( Enter destination by ), the display changes to: Tip: When entering an address , it is usually easier to enter the street first. A city or cities that the street appears in will be displayed.
36 Navigation System To enter the city name by voice spelling, say or select CHANGE TO SPELL MODE on the Say city name scre en, and the display will change to the Enter city name screen. Say the city name by saying individual letters, or words that represent the letters, one at a time.
Navigation System 37 If the system does not find an exact match, select LIST when you finish entering the name of the city. Most of the cities and towns for that s tate are listed. Listings of cities and towns in the non- detailed coverage area m ay have an asterisk “*” next to their names.
38 Navigation System The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you. For example, if you say “E” but the system does not recognize t.
Navigation System 39 If you did not select a city in the beginning, and the intersection appe ars in more than one city, you will see the Select a city screen. The system will give you a list of cities that the intersection appears in. Select the desired city from the list.
40 Navigation System • When finishing a “Today’s Destinations” trip, the Today’s Destinations list entries are stored to this list, beginning with the date (e.
Navigation System 41 If desired, rotate the Interface Dial knob to change the map scale. When you have the crosshairs in the desired icon, map feature, or road, push in on the Interface Dial . The address of the location will appear at the top of the screen.
42 Navigation System Entering a Destination Showing the Map of State With the State selection, the display changes to the Select a state screen. After you select the desired s tate, the display changes to a map of the state, with the crosshairs located near the middle.
Navigation System 43 Entering a Destination Showing the Map of Continental USA With the Continental US A selection, the display changes to: The yellow box indicat es the area you will see when you click on the current map with the Interface Dial .
44 Navigation System Entering a Destination Editing Today’s Destinations List If you change your p lans, you can modify the Today’s Destinations list order by distance or order of entry. Say or select Sort by Entry to sort the list by the entry order, an d say or select Sort by Distance to sort the list by the distance order.
Navigation System 45 Entering a Destination NOTE: When finishing a “Tod ay’s Destinations” trip, the Today’s Destinations list entries are stored to the Previous Destinations list, beginning with the date (e.g ., item 1 shown below). This entry contains all the destinations that were included in the Today’s Destinations itinerary.
46 Navigation System Driving to Your Destination Driving to Your Destination A route typically has three phases. • Initial route calculation ( Calculate route to screen) (see page 46 ). • Change the route while en route (see page 65 ). • Resume the route when restarting the engine (see Continue Trip Screen on page 69 ).
Navigation System 47 Driving to Your Destination Changing Routing Method The system lets you select the way you want to drive to your destinat ion. Before selecting OK to calculate a route, you can change the routing method by moving the Interface Dial down.
48 Navigation System Viewing the Routes Selecting View Routes on the Calculate route to screen allows you to scroll through an d view the various routes (Direct, Easy, Maximize Freeways, etc.
Navigation System 49 Driving to Your Destination Viewing the Destination Map Selecting View Dest. Map displays a map of the destination vicinit y. Press the CANCEL or NAVI BACK button to return. You can view the destination map anytime while en route by saying, “Display destination map.
50 Navigation System Voice Guidance Prompts As you get near the maneuver, you will hear a voice reminder and see a pop-up window showing you the maneuver. The number of reminde rs that you will hear before a maneuver is determined by Guidance Prompts in SETUP on page 78 .
Navigation System 51 Driving to Your Destination Map Screen Le gend Acura Dealer School Restaurant AT M P arking Lot P ost Office Honda Dealer Hospital Grocer y Store Gas Station Hotel/Lodging P arkin.
52 Navigation System Guidance Screen The guidance screen offers an alternative way to view your route information. Many of the icons and screen features are similar to those on the map screen. While driving to your destination, press the MAP/GUIDE button to switch between the map and guidance screens.
Navigation System 53 Driving to Your Destination Distance and Time to Destination When you select a destination, the distance to the destin ation is the actual road distance of the calculated route, and not “as the crow flies.
54 Navigation System Direction List If you select Directions from the Map menu , the display c hanges to: NOTE: • The map and voice guidance in unverified areas differ from those in verified areas.
Navigation System 55 Driving to Your Destination On the map screen, you can display freeway exit information using the Interface Dial . The exit info icon wil l only be displayed on the map screen if there is any freeway exit information available.
56 Navigation System Map Scale Rotate the Interface Dial kno b or say a voice command such as “Display 1/2 m ile scale” (see page 141 ) to change the s cale of the map. Zooming in incre ases the detail, while zoomin g out gives you a view of a wider area.
Navigation System 57 Driving to Your Destination Map Orientation The map can be orientated two ways: • North-up: North po inting up as you would normally view a pa per map. • Heading-up: The map cons tantly rotates so the road you are driving on always points up (as you see the road through your front windshi eld).
58 Navigation System The display automatically changes to the map scre en when you reach your destination. Press the MENU button to return to the MENU screen ( Enter destinatio n by ). NOTE: • For information on the available voice commands, see Voice Command Index on page 140 .
Navigation System 59 Driving to Your Destination For some icons, you can choose either to show or hide them on the map, while others like Honda Dealer are always shown.
60 Navigation System Showing Icons on the Map Selecting Show Icon on Map from the Map menu (see page 53 ) displays the following screen: The screen consists of the following items: Icon Bar (curved row of icon symbols) The icon bar allows you to manually select the icons that are displayed on the map (see page 58 for a list of these icons).
Navigation System 61 Driving to Your Destination For instance, let’s assume that hospital icons are not displayed on the map, and you want to make sure that your settings are correct. You would do the following: • First, you would ensure that the “OTHER ICON” button on the Icon bar is blue (see Icon Bar on pa ge 60 ).
62 Navigation System Going Off the Route If you leave the calculated route, “Recalculating...” is displayed at the top of the screen. The system will recalculate the route from your current location and direction to the desired destination, and then give you a new route instruction.
Navigation System 63 Driving to Your Destination Viewing/Saving the Current Location Whenever you are on a map screen, you can always obtain your current location either by pushing in on the Interface Dial , selecting Show Icon on Map , and selecting Current Location , or by using the voice co ntrol system and saying “Display current location.
64 Navigation System Pop-Ups and Disclaimers When you say “OK” in the Calculate Route to screen, or if you chang e your route, the system chec ks your route and provides you with po p-up messages for the following situations: • Your route takes you into an area that you previously set as an “Avoid Area” (see Edit Avoid Area on page 91 ).
Navigation System 65 Driving to Your Destination Changing the Route While en route, you may wish to alter your route, add an interim “Waypoint” (pit stop), choose a different destination, or cancel your current destination.
66 Navigation System Search Waypoint Waypoints allow you to add an interim “pit stop” while traveling to a destination. For instance, yo u may want to stop for gas or foo d, and then continue on to your destination. Although you can en ter up to five waypoints at a time, typically you may never use more than one at a time.
Navigation System 67 Driving to Your Destination From Places Around the Destination , the system displays matches in a spiral pattern outward from the destination. The search “corridor” distance value can be changed in Edit Waypoint Search Area in SETUP (see page 93) .
68 Navigation System Changing Your Destination There are four methods by which you can change or add a waypoint to your route. These are: Find Nearest (Voice command) From the map screen, say one of the “Find Nearest...” voice commands to locate the nearest gas station, ATM, restaurant, or other point of interest.
Navigation System 69 When the pop-up menu is displayed, select Set as Dest. to set your location as a replacement destination, or Se t as Waypoint to set as a waypoi nt. The system will return to the map screen and recalculat e the route to your new destination or waypoint.
70 Navigation System Information Features Information Screen When you say “Information” or press the INF O button, the display changes to: NOTE: If some items appear to be grayed out and cannot be.
Navigation System 71 Information Features Elapsed Time Shows the elapsed time that the ignition has been on. Average Speed Shows you the average speed in miles per hour (mph) since the trip meter was last reset. Range Shows the estimate d distance you can travel on the fuel remaining in the tank.
72 Navigation System Information Features Entering You r Schedule Set your schedule by selecting the day on the calendar, and the display changes to: Reminder The default for Reminder is ON . This allows the system to remind you of the calendar item the next time you start the vehicle.
Navigation System 73 Information Features Calculator When you say or select Calcul ator , the display changes to: Use the Interface Dial and its Knob to use the following fe atures: Calculator The calculator function operates like a standard handheld calculator.
74 Navigation System Information Features Voice Command Help When you say or select Voice Command Help , you will see the following screen: NOTE: You can select an item by saying ei ther the line number or the item name. There is a tutorial av ailable for the voic e command help.
Navigation System 75 Information Features Map Legend You can use the Map legend screens to learn the meaning of map features, icons, colors, etc. us ed in this system. When you say or select Ma p Legend , the display changes to: Say or select the desired item or item number to view each section of the map legend.
76 Navigation System Information Features Use the Interface Dial to scroll through the Key to Zagat Ratings screens. 2010 Accord Crosstour.
Navigation System 77 System Setup SETUP Mode The SETUP function consists of two main screens that al low you to change and update information in the system. To display the SETUP screen ( Main Setup ), use the voice control system and say “Setup” or press the SETUP button.
78 Navigation System System Setup Volume The navigation voice vo lum e has 10 settings and can be adjusted by: • Using the voice control system and saying “Volume up ” or “Volume down.” • Selecting Volume and changing the setting by rotating the Interface Dial knob .
Navigation System 79 System Setup SETUP Screen (Other) Select the “Other” tab to view additional SETUP functions and th e following screen appears: to Personal Information From the SET UP screen (.
80 Navigation System System Setup Accessing the Address Book List After selecting Address Book , the system prompts you to select User 1 or User 2 . If an Address Book PIN has bee n set, the system prompts you to enter your PIN. Verify that the correct user is displayed, then en ter your PIN.
Navigation System 81 System Setup Edit Address When you say or select Edit Address , the display changes to: Current Position - Allows you to use your current position as the address. Address - Requires you to enter the city and address you wish to store.
82 Navigation System System Setup Edit Category If desired, you can specify the cate gory of the address. Say or select Edit Category to display the Select a category screen. Scroll the screen and select a category by saying the numbe r next to your choice, or by pushing in on the Interface Dial .
Navigation System 83 System Setup Home Address This feature lets you return “Home” from any location simply by saying “Go home” at the map screen. Alternati vely, you can select Go Home on the MENU screen ( Enter destination by ). See By Go Home on page 45 .
84 Navigation System System Setup 4. When you have en tered your PIN, the display changes to the Please re- enter new PIN screen. Enter the same number to validate the number you have selected. 5. If you have entered the same number both times, the display returns to the Edit personal informa tion screen.
Navigation System 85 System Setup 2. Scroll through the list and find the address you want to delete. 3. Select the address to delete by saying the line numbe r, or by using the Interface Dial . NOTE: To cancel the deletion of Pre vious Destinations, press the CANCEL button before performi ng step 4.
86 Navigation System System Setup Routing & Guidance From the SETUP screen ( Other ), say or select Routing & Gui dance and the following screen appears: to Rerouting If Rerouting is set to AUTOMATIC and you deviate fro m the route, you will see “Recalculating.
Navigation System 87 System Setup Unverified Area Routing Allows you to receive turn-by-turn ma p and voice guidance in unverified areas when en route to a destination (see Map Ov erview on page 6) . The chart below illustrates th e routing differences with this setting ON or OFF .
88 Navigation System System Setup Unverified Area Routing When driving to your destination, you have the choice of using or not using “unverified” roads. You ma ke this choice in the SETUP screen. The next few pages contain an example of a route to a destination in an unverified area explaining the routing differences found in unverified areas.
Navigation System 89 System Setup With Unverified Area Routing OFF , the moment you enter an unverified street, a caution box appears on the screen and is read by the voice. This lets you know that you are ab out to enter an unverified area and tha t you will be following a dotted “vector line” that points to your destination.
90 Navigation System System Setup With Unverified Area Routing OFF , you are presented with a blu e “vector line” that always points to the destination. You must manually choose streets from the map that will lead to your destination. No guid ance is provided, and there are no directions to the destination.
Navigation System 91 System Setup Edit Avoid Area This function allows you to select areas you wish to avoid when calculating a route to your destination. You can select up to five areas to avoid. You may wish to set up an “avoid area” to route around long-term road construction, closures, or any area you wish to avoid.
92 Navigation System System Setup After selecting the choice, a map screen will be displayed. Rotate the Interface Dial knob to select the map scale (available scales are 1/20, 1/8, and 1/4 m ile scales).
Navigation System 93 System Setup NOTE: • You can select areas to avoid, however you cannot select roads or areas that you want the system to use for routing.
94 Navigation System System Setup For “Places Along the Route,” the system looks in fron t of you within a corridor width specified by your values for “On Freeways” or “On Surface Street.” The system checks the upcoming area, b ased on your inpu t.
Navigation System 95 System Setup Auto Daylight Sets automatic daylight saving time ON or OFF . If set to ON , the clock will automatically “spring ahead” or “fall back” by one hour when a daylight saving time change occurs. If you reside in a state or area where day light saving time is not used, then you may want to turn this feature off.
96 Navigation System System Setup Daylight Saving Time (DST) Selection (Change DST Schedule) This option lets you select the schedule ( April-October or March- November ) when daylight saving time will automatically occur in your navigation system. The system default is the March-November schedule as mandated by the U.
Navigation System 97 System Setup After you have traveled approximately 1/2 mile away from a mapped road, the system will display a series of white dots on the map screen to show the path you have traveled. This is provided so you can follow the dots to backtrack to the mapped road you originally left.
98 Navigation System System Setup 4. Rotate the Interface Dia l knob so the vehicle position arrowhead is pointing in the corr ect direction, and push in on the Interface Dial . The display will return to the previous screen. NOTE: If you continually have to do this, there are either problems in the database or GPS reception problems.
Navigation System 99 System Setup Menu Color Allows you to choos e the menu color from one of five colors for the Day and Night modes. Say “Return” or press the CANCEL button to return to the previous screen. NOTE: • Choose “Silver metal” (factor y default) as the Day color to obtain the best daytime display contrast.
100 Navigation System System Setup Switching Display Mode Automatically I Recommended Display Mode Day/Night Settings: • With the headlights on, select mid-range for the dash illumination (see your Owner’s Manual for location of kn ob).
Navigation System 101 System Setup System Information From the SETUP screen ( Other ), say or select System Information and the following screen appears: This information is for dealer use only. For ordering updates, use the versio n number stamped on the label (as Ver.
102 Navigation System System Setup NOTE: • The rearview camera ha s a special lens that makes distance s appear closer than they actually are. • The rearview camera disp lay has a limited range, and th e size and position of objects arou nd the area may appear different from reality.
Navigation System 103 System Initialization System Initialization If for any reason you lose power to the navigation system (e.g., the battery was disconnected), the navigation system will require initialization. Once completed, your system will be ready to use.
104 Navigation System System Initialization GPS Initialization Depending on the leng th of time the battery was disconnected , your system may require GPS initialization. If it does, the following screen appears: If this procedure is not necessary, the system proceeds directly to the Disclaimer screen (see page 17 ).
Navigation System 105 System Limitations Although your navigation system is on e of the most highly sophisticated piece s of equipment yo u wil l find in a modern automobile, y ou m ay f ind duri ng its u se that it has certain limitations. The system uses GPS signals to aid in determin ing its current location.
106 Navigation System System Limitations The destination icon shows the approximate location of the destination. This occurs because a city block can have as many as 100 possible addresses (for example, the 1400 bl ock is followed by the 1500 block).
Navigation System 107 Database Limitations You will find that some points of interest (POI) may be miss ing when you search the database. This can be caused if at the time the database was gathered, the name was misspelled, the place was improperly categorized, or the POI change is not yet in the database.
108 Navigation System Database Limitations • Road traffic, safety, or conditio ns • Weather conditions • Special events • Pavement characteristics or conditions • Traffic congestion • Travel time We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted abov e.
Navigation System 109 Customer Assistance Reporting Errors Occasionally, you may encounter database errors. • If the error pertains to freeways and main “verified” roads shown in black on the map, then report it online at http://update.navteq.com/ .
110 Navigation System Customer Assistance Visiting Your Dealer We strive to make this manua l as complete as possible and to answer all questions regarding o peration of the system. Occasionally , you may run into a specific issue that you cannot find in the book.
Navigation System 111 Customer Assistance Changing the DVD NOTE: The system’s database is stored on a removable DVD. The system will not work without the DVD. Ensure the door remains closed at all times. 1. Locate the control unit. It is in the right side floor st orage compartment of the cargo area.
112 Navigation System Coverage Areas Map Coverage The system provides map co verage for the lower 48 U.S. states, Hawaii, and southern Canada. The U.S. ma p coverage consists of accurately mapped (verified) metropolitan areas (in the following list) and a less accurate (unverified) rural database.
Navigation System 113 Coverage Areas Florida Cape Canaveral/Cocoa Beach/ Titusville Dixie County Florida Keys Fort Myers Metro area – including Naples Fort Pierce Gainesville Jacksonville Metro – includin g St.
114 Navigation System Coverage Areas Louisiana Baton Rouge Lafayette New Orleans Metro Shreveport Maine Bangor Bar Harbor/Acadia National Park Portland/Lewiston/Auburn Maryland State of (partial) - Baltimor e/ Washington D.
Navigation System 115 Coverage Areas New Jersey Camden Metro Newark Metro Southern New Jersey – including Atlantic City/Cape May/ Cumberland Metro Trenton Metro – including Ocean and Hunterdon Cou.
116 Navigation System Coverage Areas South Carolina Beaufort Charleston Columbia Greenville/ Spartanburg – including additional cities in Greenville and Spartanburg Counties Myrtle Beach Metro Rock .
Navigation System 117 Coverage Areas West Virginia Charleston Harper’s Ferry Metro Huntington Morgantown Parkersburg Wisconsin Appleton Beloit Eau Claire Green Bay Janesville Kenosha County La Cross.
118 Navigation System Coverage Areas Fraser Valley Abbottsford Chilliwack Mission Squamish-Lillooet Lillooet Pemberton Squamish Whistler Thompson -Nicola Kamloops Central Okanag an Kelowna Peachland O.
Navigation System 119 Coverage Areas Grey Blue Mountains Chatsworth Georgian Bluffs Meaford Grey Highlands Hanover Owen Sound Southgate West Grey Haldimand Haldimand Halton Burlington Halton Mills Mil.
120 Navigation System Norfolk Norfolk Northumberland Alnwick/Haldimand Brighton Cobourg Cramahe Hamilton Twp Port Hope Trent Hills Ottawa Ottawa Oxford Blandford-Blenheim East Zorra-Tavistock Ingersoll Norwich South-West Oxford Tillsonburg Woodstock Zorra Peel Brampton Caledon Mississauga Perth North Perth Perth E ast Perth So uth St.
Navigation System 121 Coverage Areas Wellington Centre Wellington Erin Guelph Guelph/Eramosa Mapleton Minto Puslinch Wellington North York Aurora East Gwillimbury Georgina King Markham Newmarket Richm.
122 Navigation System QUÉBEC Montreal-Laurentians Beauharnois-Salaberry Beauharnois Salaberry-de-Valleyfield Ste-Martine St- É tienne-de-Beauharnois St-Louis-de-Gonzague St-Stanislas-de-Kostka St-Ur.
Navigation System 123 Les-Jardins-De-Napierville Hemmingford Hemmingford Village Napierville St-Bernard-de-Lacolle St-Cyprien-de-Ch â teauguay St- É douard St-Jacques-le-Mineur St-Michel St-Patrice-.
124 Navigation System Coverage Areas Ste-Catherine St-Constant St-Isidore St-Mathieu St-Philippe Sherbrooke Sherbrooke Therese-de-Blainville Blainville Boisbriand Bois-des-Filion Lorraine Rosemere Ste.
Navigation System 125 CANADA CONNECTO R ROADS The Cross-Canada Connector Road allows for travel between the provinces of British Columbia and Quebec in DCA 11.
126 Navigation System Coverage Areas Operation in Alaska and Hawaii Certain functions that rely on a satellite signal will not work correctly in Alaska and Hawaii. These fu nctions include but are not limited to XM radio, automatic clock updates, and time z one adjustments.
Navigation System 127 Address and POI Entry Screens When in Hawaii, the following differences occur for map, address, and POI selection: • It is not possible to enter U.S. mainland addresses or scroll the map east to the U.S. mainland. • Selection of the “State” is confined to the state of Hawaii only.
128 Navigation System Frequently Asked Questions Map and Features, Voice Oper ation, Entering Addresses Problem Solution Why does the Disclaimer screen need to be displayed every time I st art the car? I am the only driver. The Disclaimer screen reminds you and your guest drivers to always operate the navigation sy stem in a safe ma nner.
Navigation System 129 Frequently Asked Questions When I drive at night, the screen is bright and will not switch to the night display mode. Why? Verify the following: Th e nighttime dash brightness control is not set to maximum, and Map Color in SETUP is set to Black for Night.
130 Navigation System Frequently Asked Questions Guidance, Routing Problem Solution The navigation does not route me the same way I would go, or the way some other mapping progr am displays. Why is this? The navigation system attempts to generate the optimum route.
Navigation System 131 Frequently Asked Questions While I drive, my screen s hows white dots (“bread crumbs”) on it. What do they mean? These are called “breadcrumbs.” If you drive more than 1/2 mile from mapped roads, the off-road tracking feature begins to function.
132 Navigation System Frequently Asked Questions Ordering a Navigation DVD, Covera ge, Map Errors, Limitations Problem Solution I want to buy a new DV D. How do I purchase one ? You cannot obtain a new DVD from the dealer. See Obtaining a Navigation Update DVD on page 110 .
Navigation System 133 Frequently Asked Questions Display, Accessories Rear Camera Miscellaneous Other Que stions Problem Solution The display appears dim when st arti ng the car in really cold weather. Is there a problem? No. This is normal, and it will be come brighter after a few minutes.
134 Navigation System Frequently Asked Questions Daylight saving time occurred, but the na vigation system did not change time even though SETUP shows Auto Daylight is ON . Go to the Clock adjustment screen in SETUP and select DST Selection . Ensure that the cor rect DST sche dule i s select ed.
Navigation System 135 Troubleshooting Screen Error Message Solution Navigation system is unabl e to acquire a proper GPS signal. Make sure there is nothing near th e dashboard blocking the GPS antenna (aftermarket metalli c window tinting or aftermarke t devices placed near the dashboard like radar de tectors, cell phones, or loose items).
136 Navigation System Troubleshooting * If the error pers ists or is shown for a wide area, see your dealer. Route has not been completed. Please try agai n from a different location. This message will appear when you are routi ng to or from a place (new area) that is not in the database.
Navigation System 137 Glossary Glossary The following is a glossary of terms pertaining to the vo ice recognition navigation system. Average Fuel - The average fuel economy value as displayed by the Trip computer screen. Avoid Area - Areas you wish to avoid can be entered into the system, and will be avoided while routing.
138 Navigation System Glossary Initiali zation - This refers to the period needed to reacquire the GPS satellite orbital in formation wheneve r th e navigation system po wer has been disconnected. This can take 10 to 45 minutes with the ve hicle out in an open area.
Navigation System 139 Glossary Vehicle Speed Sensor - Provides speed signal to the navigation system for moving the VP icon on the map. Verified Streets - These streets consist of the detailed metropolitan covera ge areas and all other inter-town connection roads.
140 Navigation System Voice Command Index Global Commands The system accepts these comma nds on any screen. Help (reads list of the commands for the displayed screen) Setup (displays the SETUP screen .
Navigation System 141 Voice Command Index Voice command help How long to the destination? (when en route, tells the time to destination)* How far to the destination? (when en route, tells the distance.
142 Navigation System Voice Command Index Hide: (hide the selected icon from the screen) ATM gas station restaurant post office grocery store lodging (hotel, motel) parking garage parking lot school h.
Navigation System 143 Voice Command Index convention center library school city hall court house higher education amusement park golf course historical monument marina movie theater museum park perfor.
144 Navigation System Voice Command Index Fan speed up Fan speed down Fan speed # (#: 1-7) (for best voice control, lower the fan speed) * Repeating these commands switches (toggles) the function between On and Off, so the action that occurs may not match the command you speak.
Navigation System 145 Voice Command Index XM channel # (#: 1-255) XM channel up XM channel down XM category up XM category down XM preset # (#: 1-6) XM1 preset # (#: 1-6) XM2 preset # (#: 1 -6) XM sca.
146 Navigation System Voice Command Index AUX Voice Commands The system accepts these comma nds on most screens. AUX play (or Auxiliary play) NOTE: For more information on USB features, see your Owner’s Manual .
Navigation System 147 Voice Command Index Interface dial feedback off Interface dial feedback auto Interface dial feedback on Guidance prompts minimum/min. Guidance prompts normal Guidance prompts maximum/max. On-Screen Commands The system accepts these commands on any screen.
148 Navigation System Voice Command Index Letters Assist Definitions: Say Or say “...” Say Or say “...” S ay Or say “...” Say Or say “...
Navigation System 149 Voice Command Index Symbol Assist Definitions: NOTE: The term “grave” (used for symbols À , È , Ì , and Ù ) is pronounced like “save.” Symbols Say “...” or “Symbol ...” Symbols Say “...” or “S ymbol ...” Symbols Say “.
150 Navigation System Voice Command Index Numbers and Additional Symbol Assist Definitions: Numbers Say “...” or “Num ber ...” Symbols Say “.
Navigation System 151 Index A Accessing the Address Book List ..... 80 ADD TO Today’s Destinations ........................... 44 , 46 Adding Destinations to the List ........ 44 Address .............................. 22, 23 , 81 Address Book ......
152 Navigation System Index E Easy Route ..................................... 47 Edit Avoid Area .............................. 91 Edit Waypoint Search Area .............. 93 Edit/Dele te Address ........................ 82 Editing Today’s De stinations Li st .
Navigation System 153 Index N Name ....................................... 28 , 33 NAVI BACK button ........................ 13 NAVI TALK button ........................ 13 Navigation Display Commands ...... 141 Navigation Gene ral Commands ...... 140 O Off-road Tracking .
154 Navigation System Index U Unit Conversion .............................. 73 Units (mile or km) ........................... 85 Unverified Area Routing ................. 87 Unverified Streets ......................... .... 7 Update DVD .............
Navigation System 155 License notice You have acquired a device (“DEVICE”) that includes software licensed by ALPINE ELECTRONICS, INC., from an affiliate of Microsoft Corporation (collectively “ MS”).
156 Navigation System the SOFTWARE after the date you obtain your initial copy of the SOFTWARE (“Supplemental Components”). • If ALPINE ELEC TRONICS,INC., provides or makes available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply.
デバイスHonda 2010 Accord Crosstourの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Honda 2010 Accord Crosstourをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHonda 2010 Accord Crosstourの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Honda 2010 Accord Crosstourの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Honda 2010 Accord Crosstourで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Honda 2010 Accord Crosstourを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHonda 2010 Accord Crosstourの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Honda 2010 Accord Crosstourに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHonda 2010 Accord Crosstourデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。