HoneywellメーカーDemosの使用説明書/サービス説明書
ページ先へ移動 of 46
Dolphin ® Demos For Windows Mobile ® 6 User’s Guide.
Discl aimer Honeywell International Inc. (“Honeywell”) reserves t he right to make changes in specifications and other information contained in this document without prio r notice, and the reader should in all cases consult Honeywell to determine wh ether any such changes hav e been made.
Dolphin® Demos User’s Guide Rev A 8/6/08 iii Table of Contents Chapter 1 - Installi ng and Accessing Demos Overview ........................................... ..................................................... ....................... .1 - 1 Accessing Demos .
iv Rev A 8/6/08 Dolphin® Demos User’s Guide Chapter 5 - Scan Demo Overview ..................................................... ..................................................... ............. .. 5-1 To Use the Scan Demo .......................
Dolphin® Demos User’s Guide Rev A 8/6/08 1 - 1 1 Installing and Accessing Demos Overview Demos demonstrate some of the most common features and functions of Dolphin te rminals, such as bar code scanning, imaging, and capt uring signatu res, without loading additional software applications.
1 - 2 Rev A 8/6/08 Dolphin® Demos User’s Guide Exiting Demos To close the Demos main window, • Tap the Exit icon • Tap File > Exit (ESC) • Press ESC on the keyboard View Options The View menu in the co mmand bar at the bottom of the screen changes the organization of th e Demos main window.
Dolphin® Demos User’s Guide Rev A 8/6/08 1 - 3 Upgrading Demos Demos are loaded on every Dolphin termi nal and are include d in system upgrades. Acquiring Upgrades Upgrades are available from Customer Support (see page 9-1) or www.honeywell.com/aidc .
1 - 4 Rev A 8/6/08 Dolphin® Demos User’s Guide 3. Click Next . If you a ccept the terms of the license agreement, select I acc ept the terms … 4. Click Next.
Dolphin® Demos User’s Guide Rev A 8/6/08 1 - 5 6. Click Install and t he programs begin installing. 7. The following screen appears when the progr ams have finished installing: 8.
1 - 6 Rev A 8/6/08 Dolphin® Demos User’s Guide Folder on the W orkstation After installation on the workstation is complete, the upgrade files are stored on the workstat ion at C:Program FilesHoneywe llPower Tools and Demos for WM 6.
Dolphin® Demos User’s Guide Rev A 8/6/08 1 - 7 9. When all the files are pasted, cold boot th e terminal. 10. The Power Tools upgrade installs du ring startup. Install Locations When install is complete, • The Demos CAB file remains in the IPSMAutoin stall folder.
1 - 8 Rev A 8/6/08 Dolphin® Demos User’s Guide.
Dolphin® Demos User’s Guide Rev A 8/6/08 2 - 1 2 Imaging Demo Overview The Imaging Demo demonstrates the imaging functionality of the on-board image engine, such as picture formatting, saving and printing. T o Capture Images 1. Tap Start > Demos > Imaging Demo .
2 - 2 Rev A 8/6/08 Dolphin® Demos User’s Guide Tap File > Save As . The Save As window open s. Folder None - Selecting this option sa ves f iles to the My Documents f older .
Dolphin® Demos User’s Guide Rev A 8/6/08 2 - 3 T o Select a Pr ofile 1. Tap Image > Profile . The Profile menu op ens. 2. Select the profile; Normal is selected by defau lt. 3. The selected profile will now be used to take images. A vailab le Image Profiles The following profiles come with the Imaging Demo and cannot be edited or deleted.
2 - 4 Rev A 8/6/08 Dolphin® Demos User’s Guide Menus File Menu Menu Item Description Exit Exits the Imaging Demo . Restore Defaults Restores the Imaging Demo to the def ault settings. Open Opens images; see To Open Images on page 2-2. Save Sa ves images according to syste m def aults; see To Save Ima ges on page 2-1.
Dolphin® Demos User’s Guide Rev A 8/6/08 2 - 5 Setup Menu Menu Item Description Aimer Enable s and disab l es the imager’ s aimer . Illumination Enables and disabl es the illumi nation LEDs on the imager . P or t Config Enable s you to config ure a specific IP address and TCP port.
2 - 6 Rev A 8/6/08 Dolphin® Demos User’s Guide.
Dolphin® Demos User’s Guide Rev A 8/6/08 3 - 1 3 IQ Ima ging Demo Overview The IQ Imaging Demo decodes intellig ent bar codes, inserting the data from the bar code into the appropriate fields on the IQ Imaging Demo window. In a ddition, the IQ Imaging Demo captures an image of the bar code simultaneously.
3 - 2 Rev A 8/6/08 Dolphin® Demos User’s Guide 2. Scan the bar code below. Note: This bar code has been created with informatio n that the IQ Imagin g Demo can decode and insert into th e fields. 3. A readout appears on the IQ Ima ging Demo screen: Field Descript ion T r acking Nu mbe r This is the trac king number embedded in th e ba r code.
Dolphin® Demos User’s Guide Rev A 8/6/08 3 - 3 T o Save Scanned I nf ormation You can save an image of th e scan or an image of the bar code. Tap File > Save Image or File > Save Bar Code . T o Clear Scanned Information Tap View > Clear . The fields clear.
3 - 4 Rev A 8/6/08 Dolphin® Demos User’s Guide.
Dolphin® Demos User’s Guide Rev A 8/6/08 4 - 1 4 Print Demo Overview The Print Demo test-prints a sample bar code or receipt to compatible Blueto oth or Infrared (IrDA) printers. The bar code and re ceipt files that print are formatted for O’Neil ® or Ze bra ® printers depending on which item you select.
4 - 2 Rev A 8/6/08 Dolphin® Demos User’s Guide Printing to a Bluetooth Printer A Dolphin terminal configured with a Bluetoo th radio can communicate with other Bluetoo th serial devices. Applications can take advantage of the Bluetooth seria l profile by communicating with the COM port that has been assigned to the Bluetooth serial profile.
Dolphin® Demos User’s Guide Rev A 8/6/08 4 - 3 Printing to an IrD A Printer Every Dolphin terminal contai ns an IrDA port that communicates with IrDA devices. Requirements • The IrDA printer must be turned on. • The IrDA printer must be in ra nge of the terminal.
4 - 4 Rev A 8/6/08 Dolphin® Demos User’s Guide.
Dolphin® Demos User’s Guide Rev A 8/6/08 5 - 1 5 Scan Demo Overview The Scan Demo decodes bar codes and provides a readout on the screen . In addition, the Scan Demo provides scanning statisti cs for each bar code read. T o Use the Scan Demo 1. Tap Start > Demos > Scan Demo .
5 - 2 Rev A 8/6/08 Dolphin® Demos User’s Guide Clearing Scan Data Tap File > Clear to erase the cu rrent scan data. Field This fiel d displays … Symbol The symbology t ype. Length The length of the bar code. Count The number of sc ans completed since Vie w Statistics was tur ned on.
Dolphin® Demos User’s Guide Rev A 8/6/08 5 - 3 A uto Scan When AutoScanning, Scan Demo scans continuously. 1. Place the Dolphin terminal so tha t it is pointing directly at a bar code. 2. Tap Scan > Automatic . 3. The Dolphin terminal be gins scanning continuously.
5 - 4 Rev A 8/6/08 Dolphin® Demos User’s Guide Decode Modes The Scan Demo has t hree scan modes: 1. Full Omni/Standar d This is the defa ult scan mode. The scan engine looks f or any bar code within r a nge. 2. Quick Omni The scan engine scans only those b ar codes within th e aiming beam or aiming patt ern projected b y the scan engine.
Dolphin® Demos User’s Guide Rev A 8/6/08 5 - 5 Symbologies The Scan Demo can decode a bar code only if its bar co de symbology is selected in the symbologies list. To see this list, tap Setup > Symbologies . The symbologies highlight ed in blue are the symbol ogies th at are currently selected.
5 - 6 Rev A 8/6/08 Dolphin® Demos User’s Guide Default Settings To restore the Scan Demo to default se ttings at any time, tap File > Restore Defau lts . T aking Images of Bar Codes The Scan Demo takes an image of ea ch bar code it scans. T o save that image, tap File > Save Last Image immediately after you scan a bar code.
Dolphin® Demos User’s Guide Rev A 8/6/08 6 - 1 6 Signature Capture Demo Overview The Signature Capture Demo captures a signature o n the touch screen. T o Capture a Signature 1. Tap Start > Demos > Signature Capture . The Signature Capture Demo opens.
6 - 2 Rev A 8/6/08 Dolphin® Demos User’s Guide 3. Tap File > Save . T o Clear a Signature To clear a signature from the screen, t ap Clear Signature . The written text disappears from the screen. P en Width Options You can select the width of t he line on the to uch screen from 1–4 points.
Dolphin® Demos User’s Guide Rev A 8/6/08 7 - 1 7 GPS Demo Overview The GPS Demo enables you to test the functionality of the GPS receiver integrated in to the Dolphin 9900 terminal. The GPS Demo uses COM7 to connect to the GPS receiver. Activ ating the GPS Demo To activate the GPS Demo, simply tap Start > Demos > GPS Demo .
7 - 2 Rev A 8/6/08 Dolphin® Demos User’s Guide Satellites T ab The Satellites tab displays the position of the satellites found by the GPS receiver. Logger T ab The Logger tab enables logging functionality f or the GPS Demo. Tap Start Logger to begin compiling the data in a lo g file recorded to the IPSM folder with the name GPSDemo.
Dolphin® Demos User’s Guide Rev A 8/6/08 7 - 3 The GPS Demo will continue to compile data until you tap Stop Logger . Raw Data T ab The Raw Data tab shows the data the GPS receiver is downloading. The raw data starts do wnloading when the tab is tapped.
7 - 4 Rev A 8/6/08 Dolphin® Demos User’s Guide.
Dolphin® Demos User’s Guide Rev A 8/6/08 8 - 1 8 Using Image Vie w Overview Image View is a software installed on the ho st workst ation and receives data via wireless connection from the following.
8 - 2 Rev A 8/6/08 Dolphin® Demos User’s Guide T o Connect Demos on the T e rminal to the Image View The following Demos contain a Port Conf ig feature that enables you to co nnect with Image View on the workstation: Imaging Demo T ap Setup > P ort Config .
Dolphin® Demos User’s Guide Rev A 8/6/08 8 - 3 Send and A utoSend The Imaging, IQ Imaging, Scan, an d Signature Capture De mos contain Send and/or AutoSend features. Send and AutoSend send data fro m these Demos to Image View on the wor kstation. Send sends the current data ma nually.
8 - 4 Rev A 8/6/08 Dolphin® Demos User’s Guide T o T ransmit Demo Data to Image View After setup on the workstation and the te rminal is complete: 1. On the host workstation, open Image View ( Start > Programs > Hand Held Products > Image View ).
Dolphin® Demos User’s Guide Rev A 8/6/08 9 - 1 9 Customer Suppor t T echnical Assistance If you need assistance installing or troubleshooting y our de vice, please call y our distributor or the nearest technical suppor t office: North America/Canada Telephone: (800) 782-4263 (8 a.
9 - 2 Rev A 8/6/08 Dolphin® Demos User’s Guide.
.
™ Honeywell 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 DEMOS-WM6-UG Rev A 8/6/08.
デバイスHoneywell Demosの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Honeywell Demosをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHoneywell Demosの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Honeywell Demosの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Honeywell Demosで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Honeywell Demosを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHoneywell Demosの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Honeywell Demosに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHoneywell Demosデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
