HoneywellメーカーL4007の使用説明書/サービス説明書
ページ先へ移動 of 20
PRODUCT DATA 60-2104—10 L4006,7,8; L6006,7,8 Aquastat ® Controllers GENERAL Aquastat ® Controllers are immersion typ e devices for limiting or regulating the temp erature of liquids in boil ers, storage tanks, and other applications where temperature control is required.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 60-2104—10 2 ORDERING INFORMATION When purchasing replacement and modern ization produ cts from your TRADELINE ® wholesaler or distributor, refer to the TRADELINE ® Catalog or price sheets for complete ordering number .
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 3 60-2104—10 Approvals: Underwriters Laboratories Inc: Remote bulb devices and well-mounted devi ces shipped without well are component recogni zed: File No.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 60-2104—10 4 Fig. 3. Approximate inst allatio n dimensions in inches (mm) for surface mount models. Fig. 4. App roximate immers ion well di mensions in inches (mm) for all models excep t L4006C and L6006B.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 5 60-2104—10 St anda rd Models: L4006,A,B,C,E,G; L4007,A,B; L4008A,B.E ; L6006A,B,C; L60 07A, L6008,A,G ,H T able 1.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 60-2104—10 6 L4006G High limit and circulator control 100° F to 200° F (38° C to 93° C) 10° F (6° C) fixed Horizontal T wo swi tches break simultaneously — External ad justment knob. — Insula tion depth 4 in.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 7 60-2104—10 T able 2. L6006, L6007, L6 008 Controller (SPDT Switching) Specifications. Model Appli cation Range °F (°C) Midscale Differential °F (°C.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 60-2104—10 8 INSTALLATION When Installing This Product… 1. Read these instructions carefully . Failure to fol low them could damage the product o r cause a hazardous condition. 2. Check the ratings given in the instructions and on the product to make sure the product is suitable for your application.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 9 60-2104—10 Fig. 6. Internal view of L6006A. Installing Direct Immersion Models (L4006C, L6006B) Models that provide for direct immersion of the sensin g element in to the boiler include a bulb compression fitti ng assembly instead of an immersion well.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 60-2104—10 1 0 Fig. 8. Immersion we ll fitting. Fig. 9. Internal view of L4008L or L60 08G . Mounting With Bulb Compression Fitting 1. Screw the fitting into the boiler or pipe tapping. 2. Slide the sealing w asher onto the bu lb.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 11 60-2104—10 Fig. 12. Bulb support. 3. Break the holder to the desired len gth. (See Fig. 13). NOTE: The holder must be long enough to hold the sensing bulb in freely circulating air away from the duct wall .
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 60-2104—10 1 2 Mounting on Suction Line 1. In cooling units with mo re than one suction line, place the sensing bulb on the common line. 2. Make certain the bulb is at least 2 ft (0.6 m) from the point at which the suction line leaves th e cooler .
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 13 60-2104—10 Fig. 20. T ypical oil -fired gravity system. Fig. 21. L6008A used to control cooling equipment and indicating light. Fig. 22. T ypical oil-fired hydronic system with domestic hot water . Fig.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 60-2104—10 1 4 Fig. 25. T ypical wiring hookup using L6006 or L6007 with L81 48A. Fig. 26. T ypica l systems with 1 20 volt electric heat prima ries. Fig. 27. T ypi cal Powerpile System wiring di agram. Fig.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 15 60-2104—10 Fig. 29. Operation of L6008G . Fig. 30. Opera tion of L4008L. Low Limit Controller R-B terminals provide low limit switching function (contacts open at set point on temperature rise). Maintains minimum boiler temperature for domestic hot water .
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 60-2104—10 1 6 Adjust the control point to correspond with th e boiler manufacturer recommendations. T o adjust, insert a screwdriver in the slotted screw type head located beneath the window in the cover .
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 17 60-2104—10 CHECKOUT WARNING Explosion Hazard. Can cause serio us injury , death o r property damage. This product is intended for use only in systems with a pressure relief valve. Check to make certain that the Aquastat Controller is properly installed and adjusted.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 60-2104—10 1 8 MATERIAL SAFETY DATA SHEET Section 1. Product And Company Identification Product Name: Heat Conducti ve Compound MSDS ID: DS9021 Synonyms: MS1699 Product Use: Heat conductive material used to enhan ce contact and heat transfer in te mperature sensor applications.
L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS 19 60-2104—10 Section 6. Accident al Release Measures Scrape up and dispose of as solid waste in accordance with state and federal regulations. Section 7. Handling and Storage S tore in dry place. Keep container closed when not in use.
Automation and Co ntrol Solutions Honeywell Internation al Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Dri ve North 35 Dynamic Drive Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9 customer.honeywell.com L4006,7,8; L6006,7,8 AQUASTAT ® CONTROLLERS ® U.
デバイスHoneywell L4007の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Honeywell L4007をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHoneywell L4007の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Honeywell L4007の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Honeywell L4007で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Honeywell L4007を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHoneywell L4007の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Honeywell L4007に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHoneywell L4007デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。