HoneywellメーカーMS2420の使用説明書/サービス説明書
ページ先へ移動 of 84
MS24 20 Bar C ode Sc anner / Av ery S cale Installation and User’s Guide.
Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in s pecifications and other information contained in this document w ithout prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.
iii T able of Contents Introduction Manual Scope .............................................................................................................................................. 1 Product Overview ........................................
iv Startup ....................................................................................................................................................... 42 Power - Up Test Mode ................................................................
1 Introduction Manual S cope This guide provides an ov erview of the MS2 4 20 bar code scanner/ Ave ry scale operation w ith detailed information about setup and installation. Adobe ® Acrobat ® Pr oduc t O ver vi ew versions of the user's manual s are also available for download from www.
2 Base Ki t Components Part # Descrip tion MS2420 - 105Az MS2420 Scanner/Avery Scale z D Diamonex Horizontal W indow S Sapphire Horizontal W indow 00 - 02407 M etroSelect ™ 00 - 02034 Configuration .
3 Optional Accessories Part # Desc riptio n Optional Remote Scale Di splay 46 - 00248 Remote Scale Display ( lb. ) 46 - 00249 Remote Scale Display (kg) Figure 1 . Optional Remote Scale Display Di mensions Figure 2 . Optional Remote Scale Display C ontrols (46 - 00248 lb, 46 - 0024 9 kg) Specifications are subject to change without notice.
4 Replacement Parts Part # Desc riptio n Caution W indow types (Diamonex and Sapphi re) are not interchangeable due to la ser safety and/or scanner performance differences. To change window type, the scanner must be returned to the m anufacturer for reconfigur ation.
5 General Precautions The following are s ome general precautions to r emember when handli ng the MS 2 4 20 s canner/Avery s cale . Do Not Turn the unit upsi de down with the platter i n place. Do N ot Press on the wi ndow in the replacement platter or the vertical window fr ame.
6.
7 MS2 4 20 Scanner/A very Scale Design Specific ations Opera tional Light Source: VLD 650 nm Peak Laser Power: < 1.5 mW Embedded Laser: Max Optical Power: 10 m W W avel ength: 650 nm Horizontal Depth of Field: 0 mm - 100 mm (0 "- 4" ) for 0.
8 Scale Capacities Capacity: kg unit 15 kg lb. unit 30.0 lb. Minimum Increment: kg unit 0.005 kg lb. unit 0.01 lb. Maximum Static W eig ht : kg unit 75 kg lb. unit 150 lb. Adjustments required: Calibration is required for scaled units. Electrical Voltage Supply: 4 A @ +5V / 0.
9 Base M odel Charact eristi cs Components Figure 7. MS2 4 20 Components.
10 Components It em No. Description of It em in Figure 7 1 Scale Zero Button (s ee pag e 43 ) 2 Amber LED, Scale Zero Indi cator (see page 43 ) 3 Vol ume/Tone Multi - Function Button (see page 41 ) 4 .
11 Dimens ions Figure 8 . MS 2 4 20 Dimensions Conne ctor Panel Figure 9 . MS 2 4 20 Connector Panel Specifications are subject to change without notice.
12 Caution a nd Serial Num ber Label s F ig ur e 10 . MS2 4 20 Label Locations (Top) and Examples (Bottom) Caution: To maintain compliance wi th applicable standards, all circuits connected to the i mager must meet the re quirements for SELV ( S af et y E xt ra L ow V oltag e) according to EN/IEC 60950 - 1.
13 Installat ion Quick Inst alla tio n Ou tline The following is a quick preview of the steps required for f irst time installations. Each item is discu ssed in detail later in this section. Determine clearance, ventilation and service access requiremen ts.
14 Service A ccess W hen routing and installing the cable(s) and power supply, make sure to leav e access that these components may be swapped easily without the need to remo ve the unit from the chec kout counter .
15 Unpacki ng the Unit 1. Make sure the shipping box is topside up be fore opening. 2. Remove the accessories box and chec k the box’s content for the f ollow ing items. Product Manuals Power Supply Communication Cables Remote Scale Display (Optional) 3.
16 MS2 4 20 Package Warning All hardware securing the scale a rms during shipping must be remov ed or the scale w ill not function! Figure 14 . * Do not discard instructions and sh ipping hardware! These items must be rei nstalled if the unit is going to be shipped .
17 MS2 4 20 Mounting Diagram Figure 15 . MS 2 4 20 Mounting Diagram Specifications are subject to change without notice..
18 Cable Installation (Interface Specific) RS232 The following st eps describe how to properly install the cables for an RS232 scanner application . T he scanner/ A ver y scale must then b e co nf i gured to m atch the host’s RS232 parameters.
19 Cable Installation (Interface Specific) RS232 11. Configure the MS2420 scanner to match t he host system ’ s RS232 parameters . Note: Refer to t he MetroSelect Configuration G uide ( PN 00 - 02407x ) under Section G : RS2 32 f or enabling RS232 Mode (scan the recall de faults bar code first) .
20 Cable Installation (Interface Specific) Full Speed USB The following steps describe how to properly install the cables for a Full Speed USB scanner application. The scanner/ A ver y scale must then be configured to matc h the host’s USB parameter s.
21 Cable Installation (Interface Specific) Full Speed USB 10. Configure the MS2420 scanner to match the host system’s USB para meters. For Single Cable Applications: The IBM OEM Full Spee d USB Engl.
22 Cable Installation (Interface Specific) Full Speed USB xx** Specifies international connection. See the Ba se Kit Components and Optional Accessories section of this guide fo r a complete listing. See Power Source caution sta tement located on page 12 o f thi s manual.
23 Cable Install ation (I nt erface Specific) RS485 The following steps describe how to properly install the cables for an RS485 scanner application. The scanner/ A ver y scale must then be configured to matc h the host’s RS485 parameters.
24 Cable Installation (Interface Specific) RS485 10. Configure the MS2420 to ma tch th e host system’s RS485 para meters. For Single Cable Applications: The IBM 3rd Generation 46xx, English and Metr.
25 Cable Install ation ( Secondary Scanner ) The following steps describe how to properly install the cables betw een a secondary scanner and the MS2420 .
26 Cable Install ation ( Secondary Scanner ) † See Aux power notes Er ror! Bookmark not defined. . See Power Source caution sta tement located on page 12 o f thi s manual.
27 EAS Deactivation S W 1 and S W 2 a re the swi tch banks inside the Check p oi nt d evice that set the deactivation range. The following is a list of Check p oint recommended sw itch bank settings.
28.
29 Scanner Op eration Scan Zone Figure 22 . Checker - Side (13 mil) Figure 23 . Horizontal Left/Right (13 mil) Specifications are subject to change without notice .
30 Scan Zone Figure 24 . Hor izontal Direct ( 13 mil) Figure 25 . Vertic al Direct ( 13 mil) Specifications are subject to change without notice . Typical Scan Zones shown.
31 Wake Act ivation Are a (Photocel l LED Output) The MS2420 scanner’s de fault power save mode † 39 is Dual Action Pow er Save Mode #2 (see pa ge ). T his power save mode turns the l aser OFF after a confi gured period of non - use then turns the motor OFF after thirty - minute interval s.
32 Changing the Wake Ar ea Sensiti vity Level (Photoc ell LED Range Adj ust) The MS2400 Series bar code scanne r wake area sensitivity l evel can be set to the end user s preference by scanning one of the Phot ocell Sensitivity adjustment bar codes below .
33 Audible Indicator s W hen in operation th e MS2420 scan ner provide s audible feedback that indi cates the status of the unit and the current scan. Eight settings are av ailable for the tone o f the beep (normal, six alternate tones and no tone) plus thr ee volume settings.
34 Visua l Ind icato rs The blue LED is located near the bottom cor ner of the vert ical output window on the M S2420 . W hen the scann er is ON , the flashing or constant, illumination of the LEDs i ndicates the status of the scanner and the current scan.
35 Fail ure Modes One Razz berry Tone This indicates that the scanner has ex perienced a laser subsystem failure. The scanner wil l try up to thr ee times to correct the failure condition.
36 Diagnost ic I ndicator Displa y Th er e is a t wo - digit error code display located under ho rizontal output window near the vertical output window (see f igure below) . Figure 28 . Error Cod e Display (Optional Product Roll Bar S hown) The following is a list o f possible error codes and their meanin gs.
37 Diagnostic Indicator Displ ay Error Code Description 09 COPROCES SOR COMMUNICAT ION ERRO R – Th e main microprocessor is not communicating with the interface coprocessor. The inter face coprocessor may be in a fault condition with the host or just not able to respon d.
38 Diagnostic Indicator Displ ay Error Code Description 25 LASER #2 (RIG HT HORIZONT AL) HIGH CURRENT W ARNING – The laser in the vertical scanning subsystem is drawi ng excessive current. This could be a w arning for a future total failure. Have the unit checked at an authorized service center w hen convenient.
39 Power Save Modes Th e MS 2 4 20 has f ive config urable power save m odes. Refer to the M etroSelect Con figuration Guide f or additional information on Power Sav e Modes. 1. Blink Power Save M ode: Blinks the laser OFF & O N after a conf ig ur ed period of non - use.
40 Beeper O ptions and Button Funct ions Changing the Beepe r Tone Beeper tones may be conf ig ur ed incrementally using the follow ing bar code. The new tone will be heard followed by a short pause. Two more new tones will be heard signi fying the new setting has been stored in memory.
41 The Multi - Function Button Figure 29 . The Multi -F unction Button Changing the Beeper Volume A short (<3 second) depression and the beeper volume wil l change.
42 Startup W hen the scanner first receives power, the blue LED w ill turn on and the scanner will beep once . The scanner is now ready to scan. Power- Up Test Mode W hen a MS2420 scanner is first powered up, it cycles throu gh a number of sel f - tests before starting normal operation.
43 Scale Opera ti on Scal e Zeroing After the unit has been o fficially calibrated (see page 44) the scale can be re - zeroed by pressing the scale zeroing button on either the unit o r on the remote display stand. W he n t he s cal e i s at zer o t he amber LED will be illuminated.
44 Cali bration The scanner/scale must be calibrated i f: it is a fir st time insta llation the scale cannot be re - z eroed the calibration verification tests indicate errors there is a c hange in the units of measure [i. e. from pounds (lbs.
45 Primi ng the Scale for Calibrati on (lbs. or kg) P rime the scale before star t ing either method of calibration . Note: Calibra t e the scanner/scale after the unit is installed in the checkout countertop. It is important to use the correct certified (lb.
46 Scal e Calibrati on Procedur e (lbs. or kg) with Remot e Displa y 1. Temporarily Remove the platter and place it in a s afe location. Note: It is the responsibility of the owner of the scale to con.
47 Scal e Calibrati on Procedur e (lbs. or kg) with Remot e Displa y 4. Enter full service access mode. Pow er down the uni t if necessary. Press and hold dow n the Calibration push button then pow er up the scanner/scale. Release the Calibration pu sh button .
48 Scal e Calibr ation Pr ocedure (lbs. or kg) with Remote Dis play 7. Make sure there is no l oad on the s cale platter. 8. Calibrate a zero load. Pre ss t he r ight ar ro w ( ►) button once when the remote display reads CAL 1 and there is no load on the scale platter.
49 Scal e Calibrati on Procedur e (lbs. or kg) with Remot e Displa y 12. Remove the remainin g half load from the scale then press clear (C). The message done w ill flash briefly on the display. Figure 46 . 13. Exit calibration mode. Pr ess and hold the test but ton for at least 3 second s then release.
50 Bar Code Ca libration Pr ocedur e without Remote Display The following calibration procedure can be used w hen the remote scale display i s not prese nt. This procedure requires that the scanner/scale have a s oftware serial number o f 15001, or greater.
51 Bar Code Ca libration Pr ocedur e without Remote Display 4. Enter the scale pro gram mode. Power down the unit and slide the scale p rogram swi tch to the program position. If the system is a dual cable system, disconnect the host to scale RS232 cable from the unit.
52 Bar Code Ca libration Pr ocedur e without Remote Display 7. Make sure there is no l oad on the s cale platter. The blu e LED w ill be used to indicate the cu rrent step in the calibration process. 8. Calibrate a zero load. The blue LED w ill blink once periodically.
53 Bar Code Ca libration Pr ocedur e without Remo te Display 11. Remove half of the load and center the re maining load. The blue LED will blink four t imes periodic ally. W ai t for scale stability, and then press the beeper v olume switch once. The beeper will beep 4 times indicating that the Cal 4 v alue has been stored.
54 Cali bration Veri fication U.S. Pounds (lbs.) The following tests verify if the scale's Calibra tion is accurate. For Kilogra ms see instructions starting on page 55 . Note: Th e following tests are based on a 2 - digit accuracy setting for poun ds.
55 Cali bration Veri fication Kilograms (k g) The following tests verify if the scale's Calibra tion is accurate. For US Pounds see instructions starting on page 54 . Note: The following tests are based on a 3 - digit accuracy setting for kilogr ams.
56 Security Seal Installation Note: The certification of the weighing mechanism of the scale ve rsion of this scanner is subject to federal, state and local Weights and M easures statutes and regulations and can only be performed by authorized government agencies and/or their duly registered agen ts.
57 Wire Se curity S eal ( Seal C onv ersion K it 46 - 0023 9 ) 1. Temporarily remove the platter and place it in a s afe location. 2. Install the calibration switch/button cover. 3. Secure the cover in plac e with the flat head Phi llips screw provided.
58.
59 Main tenance Horiz ontal Scan Window Re placeme nt Figure 65 . Pla tter /Ho rizontal Scan Window Replacement * See replacement parts on page 4 ..
60 Dail y Maintenanc e Smudges and dirt on the unit’s w indow can interfere wi th the unit’s performance. If the horizontal or vertical output windows require cleaning, use only a mild glass cleaner containing no ammonia.
61 T roubleshoo ting The following guide is for re ference purposes only. Contact a customer se rvice representative to preserve the limited warranty terms. Symptom Possible Cause(s) Solution All Interfaces No LEDs, beep or moto r spin. No power is being s upplied to the scanner.
62 Symptom Possible Cause(s) Solution All Interfaces The unit scans a bar co de, but locks up a fter the first scan (the blue LED stays on). The scanner is configured to support some form of host handshaking but is not receiving the signal.
63 Symptom Possible Cause(s) Solution RS232 Only The unit powers up OK and scans OK but does not communicate properly to t he host. The com port at the host is not working or is not configured properly. Check to make sure that the baud rate and parity of the scanner and the com munication port match and th e pr og ram is loo king f or RS232 data.
64.
65 Scanner an d Cabl e T erminations Scanner Pinout Connecti ons The MS2420 scanner terminates to 10 - pi n modular jacks located on the bottom of the unit. The se rial number label indicates the model number and i nterface of the scanner. EAS DC Power Figure 66 .
66 Scanner Scale Pinout Conne ctions There are four additional 10 - pin modular jacks located on the bot tom of the o f the MS2420 scanner models that may be used for an i ntegrated scale application and the use of a remo te display. Note: Please keep in mind that every application is uniq ue.
67 Cable Connector Configur ati ons RS232 Interface Cable , PN 57 - 57210x -N-3 Pin Function ** 9- Pin D - Type Connector 1 No Connect 2 RS232 Transmit Out put 3 RS232 Receive Input 4 DTR Input 5 Powe.
68 Cable Connector Configur ati ons Aux Port Configuration Cable* PN 57 - 57008x -N-3 Pin Function ** 9- Pin D - Type Connector 1 No Connect 2 Output fr om Scanner 3 Input to Scanner 4 No Connect 5 Gr.
69 Regulatory Compliance Safety ITE Equipment IEC 60950 - 1 Second Ed itio n EN 60950 -1 Second Edition Laser Laser Class 1: I EC 60825 - 1: Second Edition 2007 , EN 60825 - 1: Second Edi tion 2007 Caution Use of controls or adjust ments or performance of procedures other than those specified herein ma y result in hazardous laser light exposure.
70 EMC Emissio ns FCC Part 15, ICES - 003, CISPR 22, EN 55022 Immunity CISPR 24, EN 55024 Note : Immunity performance is not guaranteed for scanner cables greater than 3 meters in len gth when fully extended.
71 A ttenzione Questo e’ un prodotto di classe A. Se usato in v icinanza di residenz e private potrebbe causare interferenze radio che potrebbero richiedere all’utilizzatore opportune misure. A ttenti on Ce produit est de classe “A”. Dans un environne ment domestique, ce produit peut être la cause d’interfére nces radio.
72.
73 Limit ed Warr anty Honeywell International Inc. ("HII") warrants its products and op tional accessories to be free from de fects in materials and workmanship and to conform to HII’s published specifications applicable to the produ cts purchased at the time of shipment.
74.
75 Index A AC .......................................................... see power amber LED ........................................ see indicators application ........................................................... 36 audible ...................
76 power ................... 2, 7 , 8 , 13 , 14 , 18 – 2 4, 61 , 65, 66 power sav e .................................................... 39, 41 protocols .............................................................. 42 R razzberry tone ............
77 C ustomer S upport Technical Assistance If you need assistance installing or troubleshooting your device, please contact us by using one of the me thods below: Knowledge Base: www .hsmknowledgebase.com Our Knowledge Base prov ides thousands of immediate solutions.
.
.
Honey w ell Scanning & Mobilit y 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 00 - 05312 Rev E 10/12.
デバイスHoneywell MS2420の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Honeywell MS2420をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHoneywell MS2420の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Honeywell MS2420の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Honeywell MS2420で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Honeywell MS2420を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHoneywell MS2420の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Honeywell MS2420に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHoneywell MS2420デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。