HooverメーカーVISION HDの使用説明書/サービス説明書
ページ先へ移動 of 32
W ashing machine Instructions for use ®.
Intr oduction Please read these instructions for use carefully and all other information enclosed with the washing machine. Keep all documentation in a safe place for future reference or for any future owners. Note: this machine is solely for domestic use.
Contents Page Introduction 2 General delivery notes 4 Safety notes 4 Quick start 5 Description of controls 6 Programme T able 14 Programme selector 16 Detergent drawer 18 Detergents, washing aids and .
General delivery notes Please check that the following items are delivered with the appliance: - Instruction manual - Certificate of guarantee - Inlet hose - Liquid detergent or liquid bleach compartment Check that no damage has occurred during transit, and if so, do not install the appliance and call the Customer Service Centre immediately .
M) N.B! If the appliance is installed on a carpeted floor ensure that the ventilation holes on the base of the appliance are not obstructed. N) If the appliance is not running properly or breaks down, switch it of f, turn off the tap and do not tamper with the appliance.
6 Description of contr ols Door handle A "Door Security" indicator light B "Start/Pause" button C "Fast Iron" button D "T emperature" Selection button E "D.
“Kg MODE” (Function active only on Cotton and Synthetics programmes) Through every wash phase “Kg MODE” allows to monitor information on the wash load in the drum.
“ST ART/P AUSE” button Press to start the selected cycle . Changing the settings after the programmes has started (P AUSE) Press and hold the “ST ART/P AUSE” button for about 2 seconds, the fl.
9 D The option buttons should be selected before pr essing the "Start/Pause" button. “TEMPERA TURE” selection button When a programme is selected the relevant indicator will light up to show the recommended wash temperature. The T emperature button can be used to decrease or increase the temperature of your chosen wash cycle.
10 “DELA Y ST ART” button This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours. T o delay the start use the following procedure: Set the required programme.
11 “ST AIN BLASTER” button By pressing this button, which can only be activated in the Cotton cycles, the sensors in the new system come into operation. They af fect both the selected temperature, keeping it at a constant level throughout the wash cycle, and the mechanical function of the drum.
12 2) SPIN SPEED Once the programme has been selected, the maximum spin speed allowed for that programme appears on the display . Pressing the spin button will reduce the speed by 100 rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is possible to omit the spin by pressing the spin button repeatedly .
PROGRAMME selector with "OFF" position When the programme selector is tur ned the display lights up to show the settings for the programme selected.
14 21 ●● ● ●● ●● ●● ● ●● ●● ●● ●● ●● ●● 7 7 4 2 - - - 1,5 2 3 1,5 2,5 3,5 1) 1) 1) RECOMMENDED TEMP . °C 60° 40° 40° 40° - - - 30° 40° 30° 30° 30°.
15 Please read these notes The spin speed may also be reduced, to match any guidelines suggested on the f abr ic label, or for v er y delicate f a br ics cancel the spin completely this option is av ailable with a spin speed button.
16 Pr ogramme selector For the various types of fabrics and various degrees of dirt the washing machine has different programme bands according to: wash cycle, temperature and lenght of cycle (see table of washing cycle programmes).
SPECIAL SILK PROGRAMME This washing machine also has a gentle Silk and Hand W ash programme cycle. This programme allows a complete washing cycle for garments specified as ‘Hand W ash only’ and laundry items made from Silk on the fabric label. The programme has a maximum temperature of 30° and concludes with 3 rinses and no final spin.
Detergent drawer The detergent drawer is split into 3 compartments: - the compartment labelled "1" is for prewash detergent; - the compartment labelled " " is for special additives, fabric softeners, fragrances, starch, brighteners etc; - the compartment labelled "2" is for main wash detergent.
Detergents, washing aids and amounts to use Choice of detergent General purpose detergents - Powder detergents , for a thorough wash, with bleaching agent, particularly suitable for use in hot wash programmes (60°C and over), for heavily soiled and stained laundry .
Dosages Only use detergents which are suitable for use in a washing machine. Y ou will obtain the best results from your wash with the minimum use of chemical products and the best care for your laundry if you take into consideration the degree of soiling as well as the type of detergent to choose.
Useful advice for users T ips on using your domestic appliance in the most environmentally-friendly and economical way Do a full load in your washing machine T o prevent any possible waste of energy , water or detergent we recommend that you put a full load in your washing machine, not exceed the recommended maximum load size.
Main wash Sorting the laundry - It is recommended you wash only items which are machine washable with water and detergent and not dry-clean items. - If you need to wash rugs, bedspreads or other heavy items, it is best not to spin them.
The correct way to wash Preparing the laundry A) Select the laundry . Loading the laundry B) Open the porthole. C) Put the laundry in the washing machine.
Cleaning and r outine maintenance Do not use alcohol-based scourers and / or thinners on the outside of your washing machine, just a wipe with a damp cloth will suffice. The washing machine needs very little maintenance: - Cleaning the drawer compartments.
Cleaning the door glass Regularly clean the door glass with a damp cloth. A build up of soiling and residues from the water may result in water leaking from the door .
Plug not in socket. Not switched on. Power failure. Fuse blown. Door open. See cause 1. T ap turned of f. Programme selector not correctly positioned. Fill hoses are kinked Kink in discharge hose. Foreign bodies in filter House drain is blocked Leaking gasket between tap and water inlet hose.
Note: The use of environmentally-friendly , phosphate-free detergents can have the following effects: - waste water from rinsing may be cloudier because of the presence of zeolites held in suspension,.
SETTING UP + INST ALLA TION Remove the polystyrene base and place the machine near its permanent position (diagram 1). Carefully cut through the hose retaining clip at the rear of the appliance (diagram 2). Remove the 4 fixing screws marked ( A ) and remove the 4 spacers marked ( B ) (diagram 3).
Note: we recommend you keep the scr ews to immobilise the machine for futur e transit. The Manufacturers will not be r esponsible for any possible damage to the machine caused by not following the rules relating to r eleasing the mechanism. The user is responsible for all costs of installation.
30 Note: it is advisable to tur n of f the tap after each wash to isolate the washing machine fr om the water supply . For the washing machine to function properly the terminal end of the discharge hose (mouth) must be at a minimum of 50 cm and a maximum of 85 cm from the ground.
...................................................................................................................................................................................................................... ....................................
EN This appliance is marked according to the European directive 2002/96/EC on W aste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly , you will help preve.
デバイスHoover VISION HDの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hoover VISION HDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHoover VISION HDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hoover VISION HDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hoover VISION HDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hoover VISION HDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHoover VISION HDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hoover VISION HDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHoover VISION HDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。