HP (Hewlett-Packard)メーカー15の使用説明書/サービス説明書
ページ先へ移動 of 113
HP Pavilion Sleekbook 15 and HP Pavilion Ultrabook 15 Maintenance and Service Guide.
© Copyright 2012 Hewlett-Packard Development Company, L.P. AMD is a trademark of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel, Intel Centrino, Intel Co re, and Pentium are trademarks of Intel Corporation in the U.
Safety warning notice WARNING! To reduce the possibility of heat-related in juries or of overheating the device, do not place the device directly on your la p or obstruct the device air vents.
iv Safety warning notice.
Table of contents 1 Product description .................... ........... .............. ............. ............... ........... ............ ........ ... 1 2 External component identification ............... .......... ............ ......... .......
Display pane l .................. ..................... ............... .................. ................... .............. 36 Keyboard .......... ......... ........... ......... ........... ......... ........... ......... ........... ........ .....
7 Specifications ......................................... .......................... .................................... ...... ..... 85 Computer s pecifications ................ ............ .......... ............. ........... ............ .......
viii.
1 Product description Category Description Intel HM77 UMA Intel HM70 UMA Intel HM77 Discrete Produc t Name HP Pavilion Sleekbook 15 HP Pavilion Ultrabook 15 √√ √ Processors 3rd Generat ion Intel® Core™ i5 processors: Intel Core i5-3317U (1.7 GHz, turbo u p to 2.
Category Description Intel HM77 UMA Intel HM70 UMA Intel HM77 Discrete ● Intel HD Graphics 4000 for use with computer models with 3rd Generation Intel Core processors √√ ● Intel HD Graphics 30.
Category Description Intel HM77 UMA Intel HM70 UMA Intel HM77 Discrete Supports up to 8 GB of system RAM in the following configurations: ● 8192 MB total system m emory (4096 MB × 2) (no support fo.
Category Description Intel HM77 UMA Intel HM70 UMA Intel HM77 Discrete HP TrueVision HD camera (fixed, no tilt) with activity LED, USB 2.0, M-JPEG, 1280 x 720 by 30 frames per second √√ √ Ethern.
Category Description Intel HM77 UMA Intel HM70 UMA Intel HM77 Discrete ● HP AC power adapter √√ √ ● RJ-45 (Ethernet, includes lin k and activity lights) √√ √ ● USB 3.0 (2 ports) √√ √ ● USB 2.0 (1 port) √√ √ Keyboard/ pointing devices Island-style keyboard with nu meric keypad 1.
2 External component identification Finding your hardware and software information Locating hardware To find out what hardware is installed on your computer: 1. From the Start screen, type c , and then select Co ntrol Panel . 2. Select System and Security , and then in the System area, clic k Device Manager .
Component Des cription (2) Hard drive light ● Blinking white: The hard drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive.
Left side Component Des cription (1) Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is design ed to act as a deterrent, but it may not prevent the comp uter from being mishandled or stolen. (2) Vent Enables airflow to c ool internal components.
Display Component Des cription (1) WLAN antennas (2)* Send and receive wirele ss signals to communicate with wireless local area networks (WLANs). (2) Webcam light On: The webcam is in use. (3) HP TrueVision HD Webcam Records video, c aptures still photographs, and allows you to video conference and chat on line using streaming video.
Top TouchPad Component D escription (1) TouchPad light ● Amber: The TouchPad is off. ● Off: The TouchPad is on. (2) TouchPad on/off button Turns the TouchPad on or off. (3) TouchPad zone Moves the on-screen p ointer and selects or activates items on the screen.
Lights Component Des cription (1) Power light ● White: The computer is on. ● Blinking white: The computer is in the Sleep state, which is an energy-saving mode. The compu ter shuts off power to the display and other unneeded comp onents. ● Off: The computer is off or in Hibernation.
Buttons and speakers Component Description (1) Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the butt on briefly to initiate Sleep (disabled by default). ● When the computer is in the Sleep state, press the button briefly to exit Sleep.
Keys Component Des cription (1) esc key Displays system in formation when pressed in combination with the fn key. (2) fn key Displays system information when press ed in combination with the esc key. (3) Operating system key For Windows systems, returns you to the Start screen from an open app or the Desktop.
Bottom Component Des cription (1) Battery bay Holds the battery. (2) Battery lock Locks and unlocks the battery. (3) Vents (4) Enable airflow to cool internal components. NOTE: The computer fan st arts up automatically to cool internal components and prevent overheating.
3 Illustrated parts catalog Service label When ordering parts or requesting information, provide the co mputer serial number and model description provided on the service label. The serv ice label is located o n th e bottom of the computer. NOTE: Your label may look slightly diff erent from the illustration in this section.
Computer major components Item Component Spare part number (1) 39.6 cm (15.0 in), high definition (H D), WLED, SVA BrightView display assembly. The display assembly is spared at th e subcom ponent level only. NOTE: For a full list of display spare parts, see Display assembly subcomponents on page 21 .
Item Component Spare part number ● For use in Canada 701684-DB1 ● For use in France 701684-051 ● For use in Germany 701684-041 ● For use internationally 701684-B31 ● For use in Israel 701684.
Item Component Spare part number (6) System board (inclu des replacement thermal material): For use with computer models with Intel processors and UMA graphics: For use with computer m odels with HM77 chipsets and i5-3317U process ors: ● For Windows 8 Professional 701694-601 ● For Windows 8 Standard 701694-501 ● For FreeDOS 1.
Item Component Spare part number ● For Windows 8 Standard 712794-501 ● For FreeDOS 1.0 or Ubuntu Linux 712794-001 For use with computer m odels with HM77 chipsets and i3-U processors: ● For Windows 8 Professional 712795-601 ● For Windows 8 Standard 712795-501 ● For FreeDOS 1.
Item Component Spare part number ● For Windows 8 Professional 701700-601 ● For Windows 8 Standard 701700-501 ● For FreeDOS 1.0 or Ubuntu Linux 701700-001 (7) Memory modules (two, DDR 3-1600 MHz,.
Item Component Spare part number ● Ralink RT3290LE 802.11 b/ g/n 1x1 WiFi and Bluetooth 4.0 Combo Adapter (s elect models only) 690020-005 ● Ralink RT5390R 802.
Item Component Spare part number (1) Display bezel 701680-001 (2) Display Hin ge Kit (includes left an d right display hinges and brackets) 701683-001 (3) 35.
Component Spare p art number Optional extern al optical drive , not illus trated, (includes bezel and bracket): ● DVD±RW Super Multi Double-Layer Combination Drive 659940-001 Screw Kit (not illustr.
Spare part number Description 669299-005 500 GB, 5400 rpm hard drive (9.5 mm (0.37 in) × 6.35 cm (2.50 in) SATA, does not include hard drive bumpers, bracket, or cable) 669300-005 640 GB, 5400 rpm hard drive (9.
Spare part number Description 701684-031 Keyboard with black finish for use in the Un ited K ingdom (includes cable), for use with com puter models with Intel processors only 701684–041 Keyboard wit.
Spare part number Description 701684-FL1 Keyboard with black finish for use in the C zech Repu blic (includes cable), for use with computer models with Intel processors 701685-001 TouchPad button boar.
Spare part number Description 701700-501 For use only with computer models equ ipped with Discrete Graphics video memory, an HM77 chipset, an i3-2377M processor, 1 GB of de dicated video memory, and W.
Spare part number Description 712798-001 Processor for use with computer models with HM77 ch ipsets. i3-2377M for FreeDOS 1.0 or Ubuntu Linux 712798-501 Processor for use with computer models with HM 77 chipsets and i3-3277M for u se with Windows 8 Standard 712798-601 Processor for use with computer models with HM77 ch ipsets.
4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to comple te the removal and replacement procedures: ● Flat-bladed screwdri.
Drive handling CAUTION: Drives are fr agile componen ts that must be handled with care. To prev ent damage to the computer, damage t o a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer.
The following table shows how humidity affects the electrostati c voltage levels generated by different activities. CAUTION: A product can be degra ded by as little as 700 V.
Packaging and transp orting guidelines Follow these grounding guidelines when packagin g and transporting equipment: ● To avoid hand co ntact, transport pr oducts in static-safe tube s, bags, or bo xes. ● Protect ESD-sensitive part s and assemblies with co nductive or approved co ntainers or packaging.
Equipment guidelines Grounding equipment must include either a wrist st rap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a gr ounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords.
Battery Description Spare p art number 4 cell, 37 Whr, 2.55 Ah Li-ion battery 695192-001 Before disass embling the computer, fo llow these steps: 1. Shut down the computer.
2. Reset the battery release lock (2) to the locked position. Component re placement procedures 35.
Computer feet Description Spare part number Rubber Feet Kit 697906-001 The computer feet are adhesive -backed rubber pads. There are 5 rubber feet that a ttach to the base enclosure in the locat ions illustrated below. Display panel Description Spare part number Display beze l 701680-0011 39.
3. Disconnect the power from the computer by firs t unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34 ). NOTE: To replace the entire display assembly , additional steps are required (see Display Assembly on page 73 ).
4. Remove the four Phillips sc rews for the display panel. 5. Move the panel towa rd the keyboard (1) . NOTE: Support the display panel as you lean the panel forward. 6. Release the ad hesive support str ip (2) that secures the displa y panel cable connector to the display panel.
Keyboard NOTE: The keyboard spare part kit inc ludes a keyboard cab le. Description Spare part number Black key board: ● For use in Canada 701684-D B1 ● For use in France 701684-051 ● For use in.
IMPORTANT: Make special note of each screw and scre w lock size and loca tion during removal and replacement. Before removing the keyboard, follo w these steps: 1. Shut down the computer. 2. Disconnect all external device s connected to the computer. 3.
2. Turn the computer right-side up with the fron t toward you. Open the display and stand the computer on its right side. Insert a thin tool th rough the keyboard access hole. (The keyboard icon indicates the keyboard access hole .) Push firmly on the bottom of the keyboard until it disengages from the computer.
4. Gently slide your finger along the top edge of th e keyboard to re lease the keyboard clips. Lift up on the rear of the keyboard. 42 Chapter 4 Removal an d replacement procedures.
5. Tilt the keyboard forw ard (1) onto the palm rest. Release the zero insertion force (ZIF) connector (2) to which the keyboard cabl e is attached, and then disc onnect the keyboard cable (3) from the system board. 6. Remove the keyboard. Reverse this procedure to install the keyboard.
4. Remove the battery (see Battery on page 34 ). 5. Remove the keyboard (see Keyboard on page 39 ). Remove the top cover: 1. Remove the five Phillips screws that s e cure the top cover to the base e nclosure. 2. Disconnect the power button cable (1) and t he TouchPad cable (2) .
4. Remove the eight Philli ps screws from the bottom of the co mputer. 5. Turn the computer o ver and open the display. 6. Gently lift around the edges of the top cover (1) and lift to remove the top cover (2) .
Power button board Description Spare p art number Power button board (includes cable) 701686-001 IMPORTANT: Make special note of each screw and scre w lock size and loca tion during removal and replacement. Before removing the power bu tton board, follow these steps: 1.
Hard drive NOTE: The hard drive spare part kit does not include th e ha rd drive cable, or hard drive bracket and screws. Description Spare p art number 9.
Remove the hard drive: 1. Disconnect the USB cable on top of the hard drive from the compu ter. NOTE: If it is necessary to replace the ha rd drive cable, see System board on page 54 . 2. Remove the two Phillips screws (1) . Lift the hard drive (2) to remove and disconnect the hard drive cable (3) .
3. Remove the four Phillips screws (1) , and then remove the bracket (2) from the hard drive. To install a hard drive, re verse the removal procedure. Component re placement procedures 49.
USB board/Audio jack Description Spare p art number USB board (includes cable and audio-out/audio-in jack) 701687-001 IMPORTANT: Make special note of each screw and scre w lock size and loca tion during removal and replacement. Before removing the USB board, follow these steps: 1.
WLAN module Description Spare p art number Intel Centrino Wireless-N 2230 802.11 b/g/n 2×2 WiFi and Bluetooth 4.0 combinat ion adapter, for use with comput ers with Intel processors 670290-005 Qualcomm Atheros AR9485 802.11 b/g/n 1×1 WiFi Adapter 675794-005 Qualcomm Atheros A R9565 802.
Remove the WLAN module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal. The 2/white WLAN antenna cable is connect ed to the WLAN module 2/Aux terminal.
3. Remove the WLAN module by pulling the mo dule away from the slot at an angle (3) . NOTE: The WLAN module is designed with a no tc h to prevent incorrect installation into the WLAN m odule socke t.
System board NOTE: The system boar d Thermal Material Kit, part number 680571 -001, inclu des replacement thermal paste an d pads. Description Spare p art number For use with comp uter models with Int.
Description Spare p art number For use with computer models with HM70 ch ipsets and Pentium 997 processors: ● For Windows 8 Professional 703714-601 ● For Windows 8 Standard 703714-501 ● For FreeDOS 1.
Description Spare p art number For use with computer models with HM 77 chipsets. i3-2377M processors, and 1 GB of dedicated video memory ● For Windows 8 Professional 701700-601 ● For Windows 8 Standard 701700-501 ● For FreeDOS 1.
NOTE: The heat sink on your system board may ap pear different from the heat sink shown. 1. Disconnect the following cables from the system board: (1) Display panel cable (2) Speaker cable (3) Fan power connector 2. Remove the power connect or bracket Phil lips screw (1) and remove the power connector bracket (2) .
6. Disconnect the power connector cable (3) . 7. Remove the hard drive cable: a. Turn the system board upside do wn, with t he front toward you. b. Disconnect the hard drive cable from the system board. Reverse this procedure to ins tall the system board.
Memory module WARNING! To reduce the ris k of electric shock a nd damage to the equipment, unplug the power cord and remove all batteries befo re installing a memory module.
3. Remove the memory module (2) by pulling it away from the slot at an angle. CAUTION: To prevent damage to the memory module , hold the memory module by the edges only. Do not touch the components on the memory module. CAUTION: To protect a memory module after remova l, place it in an electrostatic-safe container.
2. Press down on the left and righ t sides of the memory module (2) until the side retention clips snap back into place. 3. Reverse the previous removal steps to replace the following items: ● Syste.
RTC battery Description Spare p art number RTC battery 697917-001 IMPORTANT: Make special note of each screw and scre w lock size and loca tion during removal and replacement. Before removing the RTC battery, follow these steps: 1. Shut down the computer.
Reverse this procedure to install the RTC battery. Component re placement procedures 63.
mSATA solid-state drive Description Spare p art number mSATA solid-state drive, 32 GB dr ive (for use with computers with Intel Core processors, not supported on Ubuntu Linux) 698524-001 mSATA solid-s.
2. Remove the Phillips screw (1) and slide out the mSATA solid-state drive (2) . NOTE: The drive tilts up to remove . The drive also ha s a notch that you line up to ensure it is installed correctly. Reverse this procedure to install the mSAT A drive onto a replacement system board.
PCH heat sink Description Spare p art number PCH heat sink 699248-001 IMPORTANT: Make special note of each screw and scre w lock size and loca tion during removal and replacement. Before removing the PCH heat sink, follow these steps: 1. Shut down the computer.
Reverse this procedure to install the PCH heat sink onto a replacemen t system board. Heat sink Description Spare p art number UMA graphics heat sink 697915-001 Switchable discrete graphics heat sink 697916-001 Thermal material 680571-001 IMPORTANT: Make special note of each screw and scre w lock size and loca tion during removal and replacement.
2. Remove the heat sink. If you have an UMA graphics heat sink, go to step c. a. Loosen all of the captive screws (1) and (2) and then lift the switchable discrete graphics heat sink (3) from the system board. CAUTION: To prevent damage to the cooling tube s, do not lift the assembly by the cooling tubes.
b. Thoroughly clean the thermal connections (1), (3) on the syst em board and the heat sink (2), (4) before replacing a heat sink onto a system board. Continue to step 3. c. Loosen the captive screws (1) and lift the UMA graphics heat s ink (2) from the system board.
Fan Description Spare p art number Fan 697914-001 IMPORTANT: Make special note of each screw and scre w lock size and loca tion during removal and replacement. Before removing the fan, follow these steps: 1. Shut down the computer. 2. Disconnect all external device s connected to the computer.
Speaker assembly Description Spare p art number Speaker assembl y 701690-001 IMPORTANT: Make special note of each screw and scre w lock size and loca tion during removal and replacement. Before removing the speaker assembly, follow these steps: 1. Shut down the computer.
Reverse this procedure to install the speaker asse mbly on the base enclosure. RJ-45 cover Description Spare p art number RJ-45 cover 703075-001 IMPORTANT: Make special note of each screw and scre w lock size and loca tion during removal and replacement.
Display Assembly Description Spare p art number Antenna Kit (includes l eft and right wireless antenna cables and transceivers) 701676-001 Display Panel Cable Kit (in cludes display panel cable and we.
CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to th e display assembly and ot her comput er components. 1. Remove the four Phillips scre ws from the disp lay hinges (1) an d lift the display assembly (2) .
3. Remove the two top screws (1) and two bottom screws (2) from the display bracket and lift the display brackets (3 ) to remove them. 4. If it is necessary to re place the display panel c able: a. Gently remove the cable from the routing clips (1) . b.
c. Remove the wireless antenna cables and transceivers. Reverse this procedure to reassemble and install the display assemb ly. Power connector Description Spare p art number Power co nnector 701682-001 IMPORTANT: Make special note of each screw and scre w lock size and loca tion during removal and replacement.
NOTE: The power connector screw and bracket were removed during the process to remove the system boar d. 1. Release the powe r connector (1) . 2. Lift out the power connector (2) to remove it from the base enclosure. Reverse these procedures to re place the power connector.
5 Using Windows 8 Setup Utility (BIOS) and System Diagnostics Setup Utility, or Basic Input/Outp u t System (BIOS), controls communication between all the inp ut and output devices on the s ystem (such as d isk drives, display, keyboard, mouse, and printer).
Downloading a BIOS update CAUTION: To reduce the risk of damage to t he comput er or an unsuccessful ins tallation, download and install a BIOS update only when the computer is connected to reliable e xternal power using the AC adapter.
Using System Diagnostics System Diagnostics allows you to run diag nostic tests to determine if the computer hardware is functioning properly. To start System Diagnostics: 1. Turn on or restart the computer, quickly press esc , and the n press f2 . 2.
6 Using Ubuntu Linux Setup Utility (BIOS) and System Diagnostics Setup Utility, or Basic Input/Outp u t System (BIOS), controls communication between all the inp ut and output devices on the s ystem (such as d isk drives, display, keyboard, mouse, and printer).
Displaying system i nformation 1. Start Setup Utility . 2. Select the Main menu. System information such as the system time and date, an d identification information about the computer is displayed. 3. To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding Changes , and then press enter .
BIOS version information (also known as ROM date and System BIOS ) can be displayed by using Setup Utility. 1. Start Setup Utility . 2. If the system information is not displa yed, use the arrow keys to select the Main menu. BIOS and other system information is displayed.
Using System Diagnostics System Diagnostics allows you to run diag nostic tests to determine if the computer hardware is functioning properly. To start System Diagnostics: 1. Turn on or restart the comput er. While the “Press the ESC key for St artup Menu” m essage is displayed in the lower-left corner of the screen, press esc .
7 Specifications Computer specifications Metric U.S. Dimensions: Width 38.57 cm 15.18 in Depth 25.9 cm 10.19 in Height (front to back) 2.07 cm to 2.1 cm .81 in to .83 in Weight: 2.08 kg 4.6 lbs Input power Operating voltage and current 18.5 V dc @ 3.5 A or 19.
35.6 cm (14.0 in), display specifications Metric U.S. Dimensions Width 32.4 cm 12.8 in Height 19.3 cm 7.6 in Diagonal 35.6 cm 14.0 in Number of colors 262K (6 bit) Contrast ratio 500:1 (typical) Bright ness 200 cd/m 2 (nits) (ty pical) Backlight WLED Total power con sumption 3.
1 TB* 750 GB* 640 GB* 500 GB* 320 G B* *Size refers to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightl y.
8 Windows 8 Backing up, restoring, and recovering Your computer includes tools provided by HP an d the operating system to help you safeguard your information and retrieve it if you ever need to. Th ese tools will help yo u retu rn your computer to a proper working state or even back to the or iginal factory state, all with simple steps.
libraries, des ktop, contacts, and fav orites. If files are a ccidentally deleted fro m the hard drive a nd they can no longer be restored from the Recycle Bin, or if files become corrupted, you can restore the files that you back ed up using File History.
Restore and recovery There are several options for recovering your sy stem. Choose the method that best matches your situation and level of expertise: ● If you need to restore your pe rs onal files and data, you can use Windows File Hist ory to restore your information from the backups you created.
Using Windows Refresh for quick and easy recovery When your computer is not working pr operly and yo u need to regain system stability, the Windows Refresh option allows you to start fres h and keep what is impo rtant to you. IMPORTANT: Refresh removes any traditional applications that were not originally installed on the system at the factory.
3. Click Change PC settings in the bottom-right corner of the screen, and then select General from the PC settings screen. 4. Under Remove everything and reinstall Windows , selec t Get started , and follow the on-screen instructions.
To start HP Recovery Manager fr om the HP Recovery partition: 1. Press f11 while the computer boots. – or – Press and hold f1 1 as you press the power button. 2. Select Troubleshoot from the boot options menu. 3. Select HP Recovery Manager , and follow the on -screen instructions.
Follow these steps to remove the HP Recovery partition: 1. From the Start screen, type recovery , and then select HP Recovery Manage r . 2. Select Remove Recovery Partition , and follow the on-screen instructions to continue.
9 Ubuntu Linux Backing up, restoring, and recovering Recovery after a system failure is as good as your most recent backup. As you add new softwar e and data files, you should continue to back up your system on a regula r basis to maintain a reasonably current back up.
on the drivers and software installed on your co mputer, you may need slightly more than 8 GB of space. HP recommends that you use a 16 GB device or above for best results. IMPORTANT: Remember to ins ert your USB device into the USB port on the computer before starting this procedure.
NOTE: Before you back up your in formation, be sure you have designated a location to save the backup files. 1. Click the System menu icon at the far right of the top panel, and then click System Settings > Backup icon.
10 Power cord set requirements The wide-range input feature of the computer permit s it to operate fr om any line voltage f rom 100 to 120 V ac, or from 220 to 240 V a c. The 3-conductor power cord set in cluded with the computer me ets the requiremen ts for use in the country or region where the equipment is purchased.
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Argentina IRAM 1 Australia SAA 1 Austria OVE 1 Belgium CEBEC 1 Brazil ABNT 1 Canada CSA 2 Chile .
Country/region Accredited agency Applicable note number The United States UL 2 1. The flexible cord must be Type HO5VV-F, 3-conductor, 0.75 mm² conductor size. Powe r cord set fittings (appliance coupler and wall plug) must bear the certification mark of th e agen cy responsible for evaluation in the co untry or region where it will be used.
11 Recycling When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the loca l laws and regulations in your area for battery disposal. HP encourages customers to recy cle used electronic hardware, HP original print cartrid ges, and rechargeable batteries.
Index A AC adapter 7 spare part number 22 , 24 action keys identifying 13 antenna removal 75 spare part number 22, 24, 76 Antenna Kit spare part number 22, 73, 76 audio, product description 3 audio-in.
Hard Drive Hardware Kit spare part number 20, 27, 47 hard drive light 7 HDMI port, identifying 7 heat sink removal 67 spare part numbers 20, 24, 67 hinge spare part number 22, 24, 73 HP Recovery Manag.
processor s 1 product name 1 security 5 serviceability 5 video 3 wireless 4 product name 1 R recovery 90, 91 discs 89, 93 HP Recovery Manager 92 media 93 starting 93 supported disc s 89 system 92 USB .
restoring files 90 system restore po int 88, 90 Windows applications key, identif ying 13 Windows key, identifying 13 wireless antenna removal 75 spare part number 22, 24, 76 wireless light 11 wireles.
デバイスHP (Hewlett-Packard) 15の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) 15をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) 15の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) 15の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) 15で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) 15を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) 15の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) 15に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) 15デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
