HP (Hewlett-Packard)メーカー1706の使用説明書/サービス説明書
ページ先へ移動 of 60
User G uid e 15 06 , 17 06 and1906 L CD Monito rs Doc ument P art Number: 3 89 5 21-00 2 October 2005 This guide provides information on setting up the monitor , installing dri vers, using the on-screen display menu, troubleshooting and technical specifications.
© 2005 Hewlett-P ackard Dev elopment Company , L.P . HP , He wlett Packard, and the Hewlett-P ackard logo are trademarks of Hewlett-P ackard Company in the U.S. and other countries. Compaq and the Compaq logo are trademarks of Hewlett-P ackard Dev elopment Company , L.
Cont ent s 1 Product Features 2 Safety and Maintenance Guidelines Important Safety Information . . . . . . . . . . . . . . . . . . . . . . 2–1 Maintenance Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2 Cleaning the Monitor . . .
Cont ent s Optimizing Digital Conversion . . . . . . . . . . . . . . . . . 4–9 Identifying Monitor Conditions . . . . . . . . . . . . . . . . . . . 4–10 Sleep Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10 HP Display LiteSaver (Available with Select Models) .
Conte nts Korean Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–5 ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . C–5 Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . C–5 Japanese Power Cord Requirements .
Cont ent s User Gu ide vi.
1 Product Features The flat panel display has an acti ve matrix, thin-f ilm transistor (TFT), liquid crystal display (LCD). The monitor features include: 15 0 6 M o d e l ■ � 15-inch (38.1 cm) vie wable area display . ■ � 1024 x 768 resolution, plus fu ll-screen support for lower resolutions.
Produ ct F eatures ■ Compliant with the follo wing regulated specifications: ❏ � EP A ENERGY ST AR ❏ � European Union CE Directi ves ❏ � Swedish MPR II 1990 ❏ � Swedish TCO 1 7 06 Model ■ � 17-inch (43.18 cm) vie wable area display .
Pr oduct F eature s ❏ � European Union CE Directi ves ❏ � Swedish MPR II 1990 ❏ � Swedish TCO 19 0 6 M o d e l ■ � 19-inch (48.3 cm) vie wable area display . ■ � 1280 x 1024 nati ve resolution, plus full-screen support for lo wer resolutions.
Produ ct F eatures ■ Compliant with the follo wing regulated specifications: ❏ EP A ENERGY ST AR ❏ European Union CE Directi ves ❏ Swedish MPR II 1990 ❏ Swedish TCO 1–4 User G uide.
2 Safet y and Main tenan ce Gu ide li ne s Impor tant Safet y Information A po wer cord is included with your monitor . If another cord is used, use only a po wer source and connection appropriate for this monitor .
Safety and Maintenance Gui delines Ä CAUTION: F or the pr otecti on of y our monitor , as well as y our computer , connect all po we r cords f or yo ur computer and its per ipheral de vi ces (such a s a monitor , printer , scanner) to so me form of sur ge prot ection de vi ce such as a po wer str ip or Uninterr uptible P ow er Supply (UP S).
Safety and Maintenance Gui delines ■ � Slots and openings in the cabinet are provided for v entilation. These openings must not be blocked or co vered. Ne ver push objects of any kind into cabinet slots or other openings. ■ � Do not drop your monitor or place it on an unstable surface.
Safety and Maintenance Gui delines 2–4 User G uide.
3 Set tin g Up t he Monitor T o set up the monitor , ensure that the power is turned of f to the monitor , computer system, and other attached devices, then follo w the steps below . Installin g the Monitor P e destal T o install the monitor pedestal: 1.
Setting Up the Monitor 2. Using both hands, position the monitor ov er the pedestal base and press do wn firmly to lock the pedestal base in place. When the base locks, it will make a clicking sound. Make sure the pedestal base is securely locked before continuing with the setup.
Setting Up the Monitor Connec ting t he Monitor 1. Place the monitor in a con venient, well-ventilated location near your computer . 2. Connect the monitor signal cable on the back of the monitor to the video connector on the rear panel of the computer .
Setting Up the Monitor 3. Connect one end of the power cable to the back of the monitor , and the other end to an electrical wall outlet. Connec ting the Signal and P ow er Cables 3–4 User G uide.
Setting Up the Monitor 4. Adjust the monitor as needed for your comfort using the monitor’ s tilt adjustment capability . Tilting the Monit or 5. Press the power switch to turn on the monitor . Ä CAUTION: Burn-in image damage may occ ur on monitors that displa y the same static image o n scr een for a pr olonged per iod of time .
Setting Up the Monitor Rem o vi n g t he Mon itor B as e Y ou can remov e the monitor base to mount the monitor on a wall, a swing arm, or other mounting fixture.
Setting Up the Monitor 3. Remove the three scre ws 2 as sho wn in the follo wing illustration. Remo ving the Monitor Base Ä CAUTION: Ensur e that the bottom of the monitor ba se is positioned ov er a table or desktop bef ore r emov ing the base fr om the monitor .
Setting Up the Monitor Ä CAUTION: This mo nitor supports the VE S A industry standard 100mm mounting holes . T o attach a third party mounting solution to the monitor , four 4mm , 0.7 pitc h, and 10mm long sc re ws ar e re quired (not pr ov ided w ith the monitor).
4 Opera ting t he Monitor Soft war e and U tilities The monitor includes a CD that contains two f iles you can install on your computer: ■ an .INF (Information) file ■ an .ICM (Image Color Matching) file Adobe Reader is supplied on this CD and can be installed from the menu.
Oper ating the Monitor The Imag e Color M atc hing File The .ICM files are data f iles that are used in conjunction with graphics programs to provide consistent color matching from monitor screen to printer , or from scanner to monitor screen. The .ICM file contains a monitor color system prof ile.
Operating the Monito r Do wnloadin g from the W orldwide W eb T o download the latest v ersion of .INF and .ICM files from the HP monitors support W eb site: 1. Refer to ht tp://www .hp.com/support and select your country region. 2. Follow the links for your mon itor to the support page and do wnload page.
Oper ating the Monitor F ro nt P anel Contr ols ‘ Control Function 1 Menu Opens, s elects or e xits the O SD menu. 2 – ( Minu s button) • Nav igates bac kwar d thro ugh the OSD men u and decr eases adj ustment le vels. • If the OSD menu is inac tiv e , acti vates the au to adju stment featur e to optimi z e the scr een image.
Operating the Monito r Adjustin g Monitor Set tings Use the On-Screen Display (OSD) to adjust the screen image based on your vie wing preferences. T o access the OSD, do the follo wing: 1. If the monitor is not already on, press the Power switch to turn on the monitor .
Oper ating the Monitor 6. After adjusting the function, select Save and Return, or Cancel if you don’t w ant to sav e the setting, then select Exit from the Main Menu.
Operating the Monito r The Adv anced OSD Menu has up to three sublev els and can be vie wed in one of six av ailable languages. The following table provides the menus and their functions at each le ve.
Oper ating the Monitor Adv anced OSD Menu Le vels (Contin ued) Le vel 1 Le vel 2 Le vel 3 Fac t or y Preset Mode Displa y On / Off Selecti on N P ow er- On S tatus On / Off Selecti on N Display Sleep .
Operating the Monito r For more precise adjustments, run the Adjustment P attern provided on the CD and use the Clock and Clock Phase controls (accessible from the OSD menu) as described in the follo wing section.
Oper ating the Monitor Id entifying Monitor Co nditions Special messages will appear on the monitor screen when identifying the follo wing monitor conditions: ■ � Input Signal Out of Range— Indicates the monitor does not support the input signal because the resolution and/or refresh rate are set higher than the monitor supports.
Operating the Monito r ■ Set On T ime ■ T imer: On/Of f ■ Sleep No w T o set the timer: 1. Press the Menu button on the monitor front panel to display the Adv anced Menu. 2. Scroll down and highlight Management. 3. Press the Menu button to select Management.
Oper ating the Monitor 13. Set the Timer mode to On to acti vate the Sleep T imer settings. 14. When you are finished, select Sav e and Return to exit the menu. The fifth selection, Sleep No w , turns the monitor backlights off immediately and stays in sleep mode until the next On T ime acti vates or a monitor b utton is pressed.
Operating the Monito r 4. Select the following options to conf igure the HP Display LiteSav er features: Confi gure Options Function Enable Displa y Lite Save r Enables the HP Displa y L iteSa ver functi ons; deselec t to disable the HP Display L iteSa ver .
Oper ating the Monitor Confi gure Options Function OK Stor es the curr ent settings and minimi z es HP Displa y Lite Sav er to the S ys tem T ray . Cancel Re stor es the pr ev ious s ettings and minimi z es HP Displa y Lite Sav er to the S ys tem T ray .
Operating the Monito r C hangin g the C olor T em perature 1. Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD. 2. Select Advanced Menu to access all options in the Main Menu. 3. Select Color to display the Color T emperature menu.
Oper ating the Monitor 5. T o activ ate a color profile for your monitor , you must set it as the Default Monitor Prof ile. Select “sRGB Color Space Profile, ” then click Set as Default b utton.
A Tr o u b l e s h o o t i n g Solving Common Probl ems The follo wing table lists possible problems, the possible cause of each problem, and the recommended solutions. Pro blem P ossible Cau se Solutio n Scr een is bl ank. P ow er cord is disconnected .
T roubleshooting Pro blem P ossible Cau se Solutio n Image appears blurr ed, indis tinct, o r too dark . Bri ghtness and contr ast are too lo w . Pre ss the Auto A djust button on the fr ont panel. If this does not cor rect the image , pre ss the Menu button t o open the Basi c OSD Menu , and adju st the bri ghtness and contr ast scale s as needed.
T roubleshooting Pro blem “Out of R ange . Set Monitor to 12 80 x 10 2 4 @ 60Hz ” is displ ay ed on screen. P ossible Cau se Vi deo res olutio n and/or re fr esh rate ar e set higher than w hat your monitor suppo r ts . Solut ion Re start your comput er and enter S afe Mode .
T roubleshooting Pro blem P ossible Cau se Solutio n The HP Displa y Lite Saver may not be co mpatible w ith your compu ter syst em . Some notebook computers ar e not compatible and the monitor po wer can not be contr olled. Conf irm that the HP Displa y L iteSa ver is compatible w ith you r sys te m.
T roubleshooting Preparing to call T ec hnical Suppor t If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support.
T roubleshooting A–6 User G uide.
B T ec hnical S pec ifications ✎ All performance specifications are pro vided by the component manufacturers. Performance specif ications represent the highest specification of all HP’ s component manufacturers’ typical le vel specifications for performance and actual performance may v ary either higher or lo wer .
T echnical S pecif icatio ns 1 506 Flat P anel Monitor (Continued) V ertical Re fre sh Rate 50 to 7 6 Hz Env ironmental R equiremen ts T emperatur e: Operating T emperatur e 41 to 9 5 o F 5 to 3 5 o C.
T echnical Spec ificatio ns 1 7 06 Fla t P anel Monitor Display 17 . 0 inches 4 3.18 cm Ty p e TFT L CD Vi ew able Image Si z e 17 . 0 -inch diagonal 4 3 .18 cm Til t -- 5 to 30 o Maximum W eight 10.1 lbs. 4.60 k g (unpack ed) (Unpac ked) Dimensio ns (include pedest al) Hei ght 15 .
T echnical S pecif icatio ns 1 7 06 Fla t P anel Monitor (Continued) P ow er Consumption <3 7 watts typi cal Input T erminal 15-pin D-type connector w ith cable included.
T echnical Spec ificatio ns 1 906 Fla t P anel Monitor Display 19 .0 inc hes 48 .3 c m Ty p e TFT L CD Vi ew able Image Si z e 19 .0-inch diagonal 48 .3 cm Til t -- 5 to 30 o Maximum W eight 11.7 lbs. 5 .3 0 kg (un pack ed) (Unpac ked) Dimensio ns (includes pedes tal) Hei ght 16.
1 2 3 4 5 6 7 8 9 10 11 12 T echnical S pecif icatio ns 1 906 Fla t P anel Monitor (Continued) P ow er Consumption <3 7 watts Input T erminals 15-pin D-type connector w ith cable included. Recognizing Preset Displ ay R esolutions The display resolutions listed belo w are the most commonly used modes and are set as factory defaults.
T echnical Spec ificatio ns Factor y Preset Display Modes (Continued) Preset Pi xel F ormat Horz Freq (kHz) V ert Freq (Hz) 13 115 2 x 900 71.7 7 6.1 14 12 80 x 10 2 4 64.
T echnical S pecif icatio ns blanked, the backlight is turned of f, and the Po wer light is turned amber . When the monitor is in the reduced power state, the monitor will utilize less than 2 watts of po wer . There is a brief warm up period before the monitor will return to its normal operating mode.
C Agen cy R egul ator y N otices F ede ral Communic ations Comm issi on Not ice This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Agenc y Regulatory Notices Modifications The FCC requires the user to be notified that an y changes or modifications made to this de vice that are not expressly approv ed by He wlett Packard Company may v oid the user's authority to operate the equipment.
Agency R egulator y Notices T o identify this product, refer to the Part, Series, or Model number found on the product. Ma terials dis posal This HP product contains the follo wing materials that might require special handling at end-of-life: ■ Mercury in the fluorescent lamp in the display LCD.
Agenc y Regulatory Notices Compliance with these directi ves implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by He wlett-Packard for this product or product family .
Agency R egulator y Notices Japa nese No tice Ko r e a n N o t i c e ENERG Y S T AR C ompli ance Monitors that are marked with the ENERGY ST AR Logo meet the requirements of the U.
Agenc y Regulatory Notices The po wer cord set (flexible cord or wall plug) recei ved with the monitor meets the requirements for use in the country where you purchased the equipment. If you need to obtain a po wer cord for a different country , you should purchase a po wer cord that is approv ed for use in that country .
D L CD Monitor Q ualit y and Pi x el P o licy The TFT monitor uses high-precision technology , manufactured according to HP standards, to guarantee trouble-free performance. Ne vertheless, the display may hav e cosmetic imperfections that appear as small bright or dark spots.
L CD Monitor Quality and Pi xel P olic y T o locate defectiv e pixels, the monitor should be vie w ed under normal operating conditions, in normal operating mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (16 in.
デバイスHP (Hewlett-Packard) 1706の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) 1706をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) 1706の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) 1706の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) 1706で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) 1706を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) 1706の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) 1706に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) 1706デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
