HP (Hewlett-Packard)メーカー3C339の使用説明書/サービス説明書
ページ先へ移動 of 30
TokenLink Velocity PCI Network Interface Card 3C33 9 Installation Guid e.
Notic e The information contained in this document is subject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM 3C339TokenRing card and drivers disk DOS ODI - File Name: tlvmp339.
1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE . 8 Specify the settings as listed below : ❒ C:NWCLIEN T ❒ Ye s ❒ Ye s ❒ C:WINDOW S ❒ N o ❒ 3Com Fast E.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8 with Windows 95 SR2 installed . • 3COM 3C 339 Token Ringcard and drivers disk • Windows 95 SR2 media . • Novell Netrware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols .
1 Connecting to a Netware 3.12 Serve r Windows 95 SR 2 (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:MASTERSLANDRV3C509B” ) 11 Highlight the adapter labeled “3Com Token Ring in PCI Mode” and press “OK. ” 12 At the “Network” dialogue box, click on the “Identification” folder .
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM 3C339TokenRing card and drivers disk DOS ODI - File Name : tlvmp339.
2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE . 8 Specify the settings as listed below : ❒ C:NWCLIEN T ❒ Ye s ❒ Ye s ❒ C:WINDOW S ❒ N o ❒ 3Com Fast E.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8 with Windows 95 SR2 installed . • 3COM 3C 339 Token Ringcard and drivers disk • Windows 95 SR2 media . • Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX, an d NWLink NetBIOS transfer protocols .
2 Connecting to a Netware 4.11 Serve r Windows 95 SR 2 10 Insert the 3C339 drivers diskette and set path to “A:” and hit Enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:MASTERSLANDRV3C509B” ) 11 Highlight the adapter labeled “3Com Token Ring in PCI Mode” 12 and press “OK.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Ver. 3.1 1 Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM Token Ring 3C339 card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Ver. 3.1 1 ❒ C:WINDOW S ❒ N o 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:NETWARECLIENT.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8with Windows 95 SR2 . • 3COM TokenRing 3C 339 card and drivers disk • Windows 95 media . • Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols .
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box .
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 3.51 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 3.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 4.0 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 4.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 4. Connecting to a Windows NT Server 4. 0 Windows for Workgroups Ver. 3.1 1 Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM Token Ring 3C339 card and drivers disk ver.
4. Connecting to a Windows NT Server 4. 0 Windows for Workgroups Ver. 3.1 1 ❒ C:WINDOW S ❒ N o 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:NETWARECLIENT.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8with Windows 95 SR2 . • 3COM TokenRing 3C 339 card and drivers disk • Windows 95 media . • Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols .
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box .
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 3.51 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 3.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 4.0 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 4.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0.
.
Version Number 3COM 339 Rev. 1.
デバイスHP (Hewlett-Packard) 3C339の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) 3C339をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) 3C339の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) 3C339の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) 3C339で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) 3C339を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) 3C339の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) 3C339に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) 3C339デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
