HP (Hewlett-Packard)メーカー3C900の使用説明書/サービス説明書
ページ先へ移動 of 40
Etherlink XL PCI Network Interface Card 3C900 Installation Guid e.
Notic e The information contained in this document is subject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.
1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE and set lines 1-5 as listed below ; • C:NWCLIEN T • YE S • YES C:WINDOW S • NO • 3COM Etherlink XL/Fast Etherlink XL Family . 8 Highlight option 6 to continue with installation.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • File Name: OEMSETUP.INF Size: 41K B Date: 3/14/97 • Windows 95 SR2 media.
1 Connecting to a Netware 3.12 Serve r Windows 95 SR 2 10 Set the path to “A:” and click on “OK.” (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C900Disk1” ) 11 “3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed.
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.
2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE and set lines 1-5 as listed below ; • C:NWCLIEN T • YE S • YES C:WINDOW S • NO • 3COM Etherlink XL/Fast Etherlink XL Family . 8 Highlight option 6 to continue with installation.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • File Name: OEMSETUP.INF Size: 41K B Date: 3/14/97 • Windows 95 SR2 media.
2 Connecting to a Netware 4.11 Serve r Windows 95 SR 2 10 Set the path to “A:” and click on “OK.” (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C900Disk1” ) 11 “3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Version 3.1 1 Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Version 3.1 1 9 Click on the “Install Microsoft Windows Network:” Option , and click “OK. ” 10 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 . • 3COM Etherlink 3C900 Ethernet card and drivers disk Ver. 2.1. Driver Name: El90X.DOS Size: 45KB Date: 3/21/9 7 • Microsoft Windows NT Server 3.
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2 11 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:” then click “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:LANDRV3C900DISK1”) .
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2.
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra with Microsoft Windows NT Workstation 3.51 installed . • 3COM Etherlink 3C900 ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1 10 Double click on the “Network” icon in the “Control Panel” program group . 11 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer .
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra with Windows NT Workstation 4.0 Service Pack 3 . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • Driver Name: 3C90X.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator ) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version 3.11 4 Connecting to a Windows NT Server 4. 0 Windows for Workgroups Version 3.1 1 Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver.
4 Connecting to a Windows NT Server 4. 0 Windows for Workgroups Version 3.1 1 9 Click on the “Install Microsoft Windows Network:” Option , and click “OK. ” 10 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 . • 3COM Etherlink 3C900 Ethernet card and drivers disk Ver. 2.1. Driver Name: El90X.DOS Size: 45KB Date: 3/21/9 7 • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2 11 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:” then click “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:LANDRV3C900DISK1”) .
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2.
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra with Microsoft Windows NT Workstation 3.51 installed . • 3COM Etherlink 3C900 ethernet card and drivers disk ver.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1 10 Double click on the “Network” icon in the “Control Panel” program group . 11 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer .
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 25 Set your IP address information in the “TCP/IP Configuration” dialog box, and click “OK”.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra with Windows NT Workstation 4.0 Service Pack 3 . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • Driver Name: 3C90X.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator ) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0.
.
Version Number 3C900 Rev. 1.
デバイスHP (Hewlett-Packard) 3C900の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) 3C900をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) 3C900の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) 3C900の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) 3C900で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) 3C900を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) 3C900の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) 3C900に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) 3C900デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
