HP (Hewlett-Packard)メーカーCC330の使用説明書/サービス説明書
ページ先へ移動 of 47
CC330 Digital Camera User Manual.
1 ii.
1 ii W ARNING Do not expose the camera or other accessories to rain or humidity to prevent re hazard or electric shock. For customers in the U.S.A. T ested T o Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with part 15 of the FCC Rules.
3 2 3 2 SAFETY PRECAUTIONS Camera notes: Do not store or use the camera in the following types of locations: • In the rain, very humid and dusty places. • In a place where the camera can be exposed directly to the sunlight or subject to high temperature, e.
3 2 3 2 BEFORE YOU ST ART Preface Thank you for purchasing this HP digital camera. Please read this manual carefully and keep it in a safe place for future reference.
5 4 5 4 LCD Screen notes: Extremely high-precision technology had been used to manufacture the LCD screen so that most of the pixels are operational for use. However , there may be some minute points (black, white, red, blue or green) that constantly appear on the LCD screen.
5 4 5 4 CONTENTS WARNING ............................................................................................ 1 SAFETY PRECAUTIONS ..................................................................... 2 BEFORE YOU START .......................
7 6 7 6 Flash ....................................................................................................................................... 16 Self-timer .......................................................................................
7 6 7 6 Gathering ................................................................................................................................. 21 ID .................................................................................................
9 8 9 8 Protect .................................................................................................................................... 28 Delete ............................................................................................
9 8 9 8 Connecting to a PictBridge C ompatible P rinter .......................................................................... 36 Setting the USB Mode ................................................................................................
1 1 10 1 1 10 GETTING READY Unpacking Y our package should contain the camera model you purchased along with the following items. If anything is missing or appears to be damaged, please contact your vendor . AA-size Alkaline Batteries Warranty Card CD-ROM USB Cable Wrist Strap Camera Views 1.
1 1 10 1 1 10 19 20 18 5. LCD Screen 6. Status Indicator 7. Zoom Toggle 8. Playback Button 9. Menu Button 10. Mode Selection Button 1 1. Display/Up Button 12. Flash Mode/Right Button 13. Delete Button/Down Button 14. Face Detection/Left button 15. Function/OK Button 16.
13 12 13 12 I ns er t th e B at te ry an d SD /S D HC C ar d ( No t in cl u de d) 1. Open the battery compartment. 2. Insert the enclosed batteries into the battery slot in the correct direction. 3. Insert an SD/SDHC card (not included) into the memory card slot as shown.
13 12 13 12 T urning On and Off Press the Power button to turn the camera on. To turn off the camera, press the Power button again. When the camera is turned on, it will be at the same shooting mode based on the last use. Y ou can press the Mode button to select a different one after it is on.
15 14 15 14 Setting Date/T ime and Language The Date/T ime and Language setup will a utomatically appear when the camera is turned on t he rst time. To set the language, date, and time, go to the following setup options in the Setup menu. • Language • Date / T ime T o access the Setup menu, do the following: 1.
15 14 15 14 BASIC OPERA TION Shooting in Auto Mode Auto mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes your photos for best results. T o start shooting, do the following: 1. Press Power to turn the camera on.
17 16 17 16 3. Press button to conrm the settings and exit the menu, or press Down button to enter the selection screen of Basic Function. 4. Press Left/Right button to select the basic functions r.
17 16 17 16 Advanced Functions Menu The Advanced Functions Menu of the camera include Image Size, Image Quality , White Balance, Image Color and ISO etc. The suitable function setting can let you shoot better photos and videos. Set the advanced functions as per the following steps: 1.
19 18 19 18 WB (White Balance) The White Balance allows you to adjust the color temperature under different light source to ensure faithful color reproduction.
19 18 19 18 USING THE MODES LCD Screen Display Still Picture Mode Display 1 Shooting Mode Icons Auto mode Panorama mode Scene mode Stabilization mode Portrait 2 AF (Auto Focus) Mode Single-AF Multi-AF.
21 20 21 20 Video Shooting Mode Display 1 Video Mode icon 2 Continuous AF (Auto focus) Single-AF 3 Exposure Metering Spot Center AiAE 4 Zoom Scale 5 Remaining time for Video Recording 6 Battery Status.
21 20 21 20 Scene mode In Manual Scene mode, you can select from a total of 20 scene types to match your needs. You just need to select the right scene for the occasion and the camera will automatically adjust to the optimal settings for you. Press the button, highlight the Scene Mode icon with the Left/Right button.
23 22 23 22 Panorama mode Panorama mode allows you to create a panoramic picture across a distant scene. The camera will automatically compose a panoramic picture using the individual shots that you take. Follow these steps to create a panoramic picture: 1.
23 22 23 22 Stabilization mode This mode can help reduce photo blur caused by a shaky hand, low light and slow shutter speed. Use stabilization mode in dark environments or when in slow shutter speed. Shooting in a windy or unstable environment (such as a moving vehicle) may cause blurred images.
25 24 25 24 PLA YBACK V iewing Photos and V ideos T o view the captured photos and video clips on the LCD screen: 1. Press button to go to the Playback mode. The last recorded photo or video clip is displayed. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or memory card.
25 24 25 24 Using Zoom Playback (for still pictures only) The zoom toggle can be used during playback. This allows you to magnify photos up to 2 ~ 8X. 1. Press button to go to the Playback mode. 2. Use the Left/Right navigation buttons to select a photo to magnify .
27 26 27 26 USING THE MENUS Still Menu In any of the above Still Picture Modes, press the button to go to the Still Picture menu. T o adjust each setting: 1.
27 26 27 26 Continuous Shot Use this setting to perform continuous shooting. Once in this mode, you must continuously hold down the Shutter button to use this function.
29 28 29 28 Movie Menu In the Movie Mode, press the button to go to the corresponding Movie menu. T o congure each setting: 1. In the Movie menu, switch between the Movie Setup or different Camera Setup pages using the Left/Right button, select the page with the function you want to adjust and press the Down button.
29 28 29 28 2. Press the Up/Down button to select the protection setting option and press the Right button to go to the submenu. 3. Use the Up/Down button to select One to lock the selected picture or video, or select All to protect all pictures/videos stored in the built-in memory or memory card.
31 30 31 30 T rim The T rim setting allows you select an area of the photo you want to keep and then save it as a new photo. T o trim a picture: 1. Select the T rim setting from the menu. 2. Using the Left/Right buttons, locate the photo that you want to crop and have it displayed on the LCD.
31 30 31 30 2. Use the Left/Right button to select the picture from which the red-eye needs to be removed. 3. Use the Up/Down navigation buttons to select Y es to x the selected image or Back to cancel and return to the Playback menu. 4. Press the button to conrm the setting.
33 32 33 32 Startup Screen: Use Up/Down button to select the Startup Screen option, press to conrm or press Left button to return to last page, and press to exit the menu.
33 32 33 32 LCD Brightness Use this setting to adjust the brightness of your LCD screen. 1. Select the LCD Brightness setting from the Setup menu as described previously . 2. Select auto or adjust the brightness level using the Left/Right button, and press the button to conrm the setting.
35 34 35 34 File and Software Format Memory Please note: formatting enables you to delete all contents in the memory card and built-in memory , including protected photo and movie les. T o use this setting: 1. Select the Format in File and Software menu.
35 34 35 34 T ransmission V ideo System Use this setting to determine your video system in the current area. 1. Select the Video System in Connection Setup menu. 2. Use the Up/Down navigation buttons to select NTSC or P AL . Then press the button to conrm.
37 36 37 36 If the USB option is set to [PC] : T urn the camera off and disconnect the USB cable. If the USB option is set to [PC (PTP) ] : Remove the camera from the system as described below before turning the camera off and disconnecting the USB cable.
37 36 37 36 Using the PictBridge Menu After setting the USB mode to Printer, the PictBridge menu appears. Select a menu item with the Up/Down button and press the Right button or button to enter the item. Refer to the following sections for more detailed information on each setting.
39 38 39 38 Print index Y ou can use this setting to print all indexes to show all the photos currently in your camera. 1. Select Print index from the PictBridge menu. The following screen appears. 2. Select Y es to conrm the printing, or Cancel . Then press the button .
39 38 39 38 APPENDICES Specications Effective Pixels 14.0MP (4320×3240) Sensor Type 1/2.3" CCD Lens Focal Length 5.2mm (Wide) ~ 15.6mm (Tele) Aperture F3.5 (Wide) ~ F6.4 (Tele) Zoom 3X optical zoom, 6X digital zoom Resolution Still Image 14MP, 12MP(3:2), 10MP(16:9), 8MP , 5MP, 3MP, 0.
41 40 41 40 Error messages Messages Explanation No card • The memory card is not inserted. Card error • The memory card is not formatted. Card full • The memory card is full and cannot store any new images. Write protect • The memory card is write-protected.
41 40 41 40 T roubleshooting Problem Possible causes Solution Camera does not turn on. • The battery has run out. • The battery is not i nserted correctly. • Replace with a fully charged battery. Camera turns off suddenly during operation. • The battery has run out.
43 42 43 42 Getting Help Should you have a technical support question or your HP Digital Camera require service within the warranty period, please contact the original point of purchase or an authorized HP reseller in your country .
43 42 43 42 Contact/phone Support: Country Language Number Europe Region (EMEA) België Nederlandsk/ Deutsch + 32 2700 1724 Deutschland Deutsch + 49 6950073896 España Español + 34 914533458 France F.
.
P/N: 7525C00257A.
デバイスHP (Hewlett-Packard) CC330の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) CC330をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) CC330の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) CC330の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) CC330で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) CC330を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) CC330の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) CC330に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) CC330デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
