HP (Hewlett-Packard)メーカーCIFS Server and Terminal Serverの使用説明書/サービス説明書
ページ先へ移動 of 19
HP CIFS Se rver and Terminal Server Version 1.06 October , 200 7 SNSL Advanced Technology Center E0300 Printed in: U.S.A. ©Copyright 2007 Hewlett - Packard Company.
2 Legal Notices The information in this document is subject to change witho ut notice. Hewlett - Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
3 Contents Legal Notices .................................................................................................................. 2 Chapter 1 Introduction ......................................................................................
4 Chapter 1 Introduction Many organizations host file server and print server services on H P CI FS Server and Samba open source servers, usually running on UNIX or Linux operating systems. Client access to these services is typically achieved by dir ect network connectivity from the client to the server.
5 Chapter 2 Samba and Terminal Server Integration The fundamental Samba design is to m anage each client connection to the server with a discrete user process called a smbd daemon. During the client session setup to the Samba server the father Samba process starts the smbd from an incoming client TCP/IP session connection.
6 Naturally, the expectation of Terminal Server is that the six remote client connections and subsequent share mounts to the Samba server will result in 6 separate TCP/IP connections , resulting in the expected 6 smbd process to service each virtual client.
7 Chapter 3 Samba with TS on Windows NT4 /2000 /2003 Terminal Server on Windows N T4 , 2000 , and 2003 is configurable to allow the underlying Windows operating system to appropri ately handle multiple incoming client connections for Samba (or other) servers.
8 behavior provides the system resources per client connection that Samba was designed for, and thus Samba performance for Terminal Server connections is consistent with standard client sessions (note.
9 Chapter 4 Without the Hotfix If the Windows Terminal Server is not configurable with the hotfixes listed in Chapter 3, t he resulting Termina l Server functionality of no configurable option for multi ple TCP transport sessions renders the Samba server default configuration behavior incapable of starting more than one smbd user process .
10 Chapter 5 Terminal Server Workarounds There is no easy way to generate a new TCP/IP connection for every Terminal Server client that conne cts to a back - end file server. Interestingly, multiplexing numerous discrete connections over a single TCP/IP pipe (the default Windows behavior) has potential reliabilit y issues by itself.
11 Prior to Samba version 3.0.2, t he Samba code data stru cture for “netbios aliases =” w as 1024 bytes long. Therefore, the total number of aliases that could be defined was limited by the total length of all defined alias names: (Alias1+Alias2 +… .
12 5.1.2 T erminal Server Hosts File Aliases The Windows Terminal Server can be configured with a hosts file that is similar in function to the UNIX/Linux /etc/hosts file. The Terminal Server hosts file can be configured to supply Terminal Server aliases for a back - end Samba file/print server.
13 Managing s ynchronization between the user logon and the Samba share alias could occur via numerous methods in a consolidated fashion on the Terminal Server. 5.1.3 WINS Server NetBIOS Aliases NetBIOS aliases can also be defined on the WINS server, and they operate similarly to the names defined above in the hosts file.
14 Filtering the WINS display for the Samb a server emonster IP address show s the static mapping table for the users that looks similar to the hosts file we created above (except with multiple NetBIOS name suffixes per user) . The user can now map their share using the familiar s yntax: buffy share .
15 5.3 Home Share Configuration Samba allows for considerable customization of user home share definitions. At least one method of home share configuration is not advisable when servicing multiple Terminal Server users per smbd process. The most common ho me share definition is the Samba [homes] share.
16 The Terminal Server sees the service name as EMONSTER HOME - SHARE , and not emonster buffy . I f the user spike open s a session on the same Terminal Server and mounts the home - share using the same procedure as buffy, Terminal S erver will use the same service name as buffy.
17 Using the [homes] share definition, Terminal Server sees the service name as EMONSTER BUFFY . File access and file locking tasks perfo rm correctly. When configuring Samba for home shares with Terminal Server usage, it is best to avoid defining a share mnemonic with a substitution variable in the path (previous example) .
18 When using the Samba “netbio s aliases =” workaround or the Terminal Services hosts file for Samba aliases, the MAX_CONNECTIONS issue does not occur (when each Terminal Server user is allocated a separate smbd process). Note: Samba 3.0.2 is enhanced to eliminate the maximum (128) i ssue.
19 Chapter 6 Summary The d efault behavior of Terminal Server on Windows is to multiplex all user connections to individual machines (Samba file and print servers) over a single TCP/IP connection, which poten tially results in multiple Terminal Server user sessions being serviced by one Samba smbd process.
デバイスHP (Hewlett-Packard) CIFS Server and Terminal Serverの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) CIFS Server and Terminal Serverをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) CIFS Server and Terminal Serverの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) CIFS Server and Terminal Serverの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) CIFS Server and Terminal Serverで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) CIFS Server and Terminal Serverを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) CIFS Server and Terminal Serverの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) CIFS Server and Terminal Serverに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) CIFS Server and Terminal Serverデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
