HP (Hewlett-Packard)メーカーDL320の使用説明書/サービス説明書
ページ先へ移動 of 43
Front View: Rear View: 1. Cover 1. Power supply 2. Non Hot Plug Dual Rotor Fans 2. Mouse connector 3. Optional Slim 9.5mm DVD ROM 3. NIC 1 Port/Shared iLO 2 Management Port 4. USB connectors (2) 4. NIC 2 Port 5. Power Button, UID button, and Front LED Indicators 5.
1 Six-Core, Quad-Core, or Dual-Core Intel Xeon processor 3500, 3600, 5500, 5600 series Intel 5500 Chipset with up to 6.4GT/s QPI Memory: Nine (9) DIMM slots Up to 96GB, using DDR3 Registered (RDIMM) m.
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and parts repair is available for three years Next Business Day, with three year on-site support from date of purchase.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Six-Core Processors Intel® Xeon® Processor X5650 (2.
Memory Protection Advanced ECC Mirroring mode Lock-step mode Online spare NOTE: Xeon W3500 and W3600 processor family does not support any of above advanced features.
Storage Controllers Entry Models HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0) NOTE: Transfer rate: 3Gb/s SATA NOTE: SATA Hot Plug available via Hot Plug Advance Pack for B110i NOTE: Hot Plug SAS and SATA controllers available via PCI card option.
complex Datacenters. HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecyle. This provides the customer with higher levels of operational efficiency and highly reliable systems: www.
remote location. NOTE: For more information, visit: http://www.hp.com/go/insightdynamics Industry Standard Compliance ACPI 2.0 Compliant PCI 3.0 Compliant PXE Support WOL Support Microsoft® Logo certifications USB 2.
Server Power Cords North America One 6' Highline (IEC-IEC) power cord ships standard Japan One 6' Highline (IEC) power cord and one 6' Lowline power cord ship standard ROW One 6' Highline (IEC) power cord ships standard NOTE: HP ProLiant DL320 G6 servers ship standard worldwide with a C13 to C14 2M Highline jumper cord.
Rack Airflow Requirements Rack 10000 G2 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
Service and Support HP Care Pack Services provide total care and support expertise with committed response times designed to meet your IT and business needs. HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. HP DL320 G6 Entry Models HP DL320G6 E5502 505682-xx1 Processors Intel® Xeon® Processor E5502 (1.
HP DL320 G6 High Efficiency Models HP DL320G6 L5506 505683-xx1 Processors Intel® Xeon® Processor L5506 (2.13 GHz, 4MB L3 Cache, 60W, DDR3-800) Cache Memory 4MB L3 Cache Memory 4 GB (2 x 2 GB) DDR3 U.
Network Controller Embedded NC326i Dual Port Gigabit Server Adapter Storage Controller HP Smart Array P410/256MB Controller Hard Drives None Ship standard Internal Storage 4 x 2TB 3.5" Hot plug SATA/SAS Optical Drive Optional Power Supply (2) 400W Redundant Hot Plug Power Supply Fans 5 dual rotor fans ship standard Form Factor Rack (1U), (1.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
Intel® Xeon® Processor W3520 (2.63GHz, 8MB L3 Cache, 130W, DDR3-1066, HT, Turbo 1/1/1/2), FIO 519748-L21 Intel® Xeon® Processor W3540 (2.93GHz, 8MB L3 Cache, 130W, DDR3-1066, HT, Turbo 1/1/1/2), FIO 519749-L21 Intel® Xeon® Processor W3550 (3.
Step 3: Choose Additional Factory Integratable Options (only one of the following from each list unless otherwise noted) HP Storage Controllers HP Smart Array P212/256 MB w/ Battery FIO 491191-B21 HP .
NOTE: Some options may not be factory integratable. Contact your local sales representative for additional information. HP Memory Registered DIMMs (RDIMMs) HP 2GB 2Rx8 PC3-10600R-9 Kit 500656-B21 HP 4.
HP 146GB 6G SAS 10K SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 507125-B21 HP 146GB 3G SAS 10K SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 418367-B21 HP 72GB 6G SAS 15K SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 512545-B21 HP 72GB 3G SAS 15K SFF (2.
SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive 571230-B21 HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive 458945-B21 NOTE: SATA hard drives have a 1-year warranty.
HP Insight Software HP Insight Control HP Insight Control, Single-Server License including 1 year of 24x7 Technical Support and Updates 452148-B22 HP Insight Control suite, No Media, Electronic Licens.
NOTE: This license allows 1 server to be deployed and managed via HP iLO Advanced. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s).
256 MB Cache Module NOTE: Supported on HP Smart Array P212 Controller only. 462968-B21 512MB BBWC NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array P411 Controller only. 462967-B21 Battery Kit upgrade NOTE: To enable BBWC on the 256MB cache.
Tape Backup NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape . For hardware and software compatibility of HP StorageWorks tape backup products see: http://www.hp.com/go/connect .
HP StorageWorks D2D4004i Backup System NOTE: 3.0TB (expandable to 7.5TB) of useable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
HP Disk Storage Systems Disk Enclosures HP StorageWorks D2700 Disk Enclosure AJ941A NOTE: Please see the QuickSpecs for additional options and configuration information at: http://h18000.
HP USB and SD Options HP 4GB SD Flash Media Kit NOTE: Blank USB and SD media device is supported for use with VMware and Citrix. USB/SD media must be installed in the internal slot of the ProLiant server. Learn more at: http://www.hp.com/go/proliantvirtualization .
HP Care Pack Services Hardware Services On-site Service Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic U4479E 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years.
NOTE: Memory configurations listed do not apply to "Factory Integrated Models". DDR3 memory population guidelines NOTE: Charts do not represent all possible memory configurations. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.
1066MHz. If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, at the maximum speed will be 1066MHz. If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz.
CPU1 slot # population order Chnl 1 1 G; 8GB DIMM 2 D; 8GB DIMM 3 A; 2GB DIMM Chnl 2 4 H; 8GB DIMM 5 E; 8GB DIMM 6 B; 2GB DIMM Chnl 3 7 I; 8GB DIMM 8 F; 8GB DIMM 9 C; 2GB DIMM Standard memory replaced.
Capacity references are rounded to the common Gigabyte values. 1GB = 1024MB 2GB = 2048MB 4GB = 4096MB 8GB = 8192MB For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.
1-4 Four SATA or SAS drive bays A Optical Drive Bay: Optional 9.5mm DVD-ROM, or DVD-RW drive 1-8 Eight Hot-plug SATA/SAS hard drive bays A Optional 9.5mm DVD-ROM, or DVD-RW drive Drive Support Quantity Supported Position Supported Controller Removable Media HP 9.
450GB 3G 15K DP 400GB 3G 10K DP 300GB 6G 15K DP 300GB 3G 15K DP 146GB 3G 15K DP HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB with BBWC Controller SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives Quantity Supported Position Supported Controller 500GB 7.
250GB 3G SATA 7.2K 160GB 3G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller with RAID 0/1/1+0 support HP Smart Array P212/Zero Memory Controller HP Smart Array P212/256 MB Controller H.
Position Supported Controller Controller Part Number HP StorageWorks SCSI Tape Drives LTO-1 Ultrium 232 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-3 Ultrium 960 LTO4 Ultrium 1760 LTO-4 Ultrium 1840 DAT 4.
Libraries 1/8 G2 Autoloader MSL2024 MSL4048 MSL8096 NOTE: Please check the full compatibility information at: http://www.hp.com/go/connect HP StorageWorks Fibre Channel Tape Libraries MSL2024 MSL4048 MSL8096 MSL6000 External Please consult the EBS connectivity matrix at: http://www.
HP 500W Power Supply Part Number - AC 500W PSU 537150-B21 Input Voltage Range (Vrms) 100 to 240 Frequency Range (Nominal) (Hz) 47/63 Nominal Input Voltage (Vrms) 100 120 200 220 230 240 Maximum Rated Output Wattage 500 500 500 500 500 500 Nominal Input Current (A rms) 5.
HP 400W Power Supply Part Number - AC 400W PSU 515739-B21 Input Voltage Range (Vrms) 100 to 240 Frequency Range (Nominal) (Hz) 50/60 Nominal Input Voltage (Vrms) 100 120 200 208 220 230 240 Maximum Rated Output Wattage 400 400 400 400 400 400 400 Nominal Input Current (A rms) 5.
System Unit Dimensions (H x W x D) (with bezel) 1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.19 cm) Weight (approximate) Maximum (four hard drives, power supply, and processor installed) 29.95 lb (13.6kg) Minimum (one hard drive, power supply, and processor installed) 25.
Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min). Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment.
Integrated Serial ATA Controller Simultaneous drive transfer channels 4 channels Transfer rate synchronous (maximum theoretical) 150 MB/s per channel Data transfer method HP Smart Array B110i SATA RAI.
Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green .
デバイスHP (Hewlett-Packard) DL320の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) DL320をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) DL320の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) DL320の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) DL320で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) DL320を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) DL320の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) DL320に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) DL320デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
