HP (Hewlett-Packard)メーカーF1381Aの使用説明書/サービス説明書
ページ先へ移動 of 34
1- 1 HP F1381A Port Replicator for the HP OmniBook 3000 User’s Guide For other Service and User Manuals, go to www.ManualDepot.com.
1- 2 Notice This manual and any examples contained herein are provided “ as is ” and are subject to change without notice. Hewlett -Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1- 3 HP Software Product License Agreement Your HP OmniBook PC contains factory-installed software programs. Please read the Software License Agreement before proceeding. Carefully read this License Agreement before proceeding to operate this equipment.
1- 4 the product recovery CD -ROM was originally provided. (ii) The use of any operating system software by Microsoft contained in any such product recovery CD -ROM shall be governed by the Microsoft End User License Agreement (EULA). Transfer of Rights in Software.
1- 5 Contents 1. Using the Port Replicator .............................. 1- 7 Understanding the Basics .............................. 1- 9 To dock the OmniBook .............................. 1- 10 To undock the OmniBook ............................ 1- 12 To reset the OmniBook .
.
1- 7 1 Using the Port Replicator.
1- 8 Using the Port Replicator Congratulations! With the OmniBook port replicator, you can significantly increase the convenience of your OmniBook for desktop use. By making one connection — plugging your OmniBook into the port replicator — you can get easy access to these types of devices: ♦ Printer or other parallel device.
Using the Port Replicator Understanding the Basics 1- 9 Understanding the Basics Docking the OmniBook to the port replicator is just like simultaneously adding several devices to the OmniBook. Docking does not cause Windows 95 to create a new hardware profile.
Using the Port Replicator Understanding the Basics 1- 10 To dock the OmniBook CAUTION Use only an HP F1377A ac adapter (the type shipped with the OmniBook) — do not use an ac adapter from another product. Using an improper adapter could damage the OmniBook and will make your warranty invalid.
Using the Port Replicator Understanding the Basics 1- 11 3. Place the OmniBook on the port replicator platform, with the back of the computer facing the port replicator's docking connector. 4. Position your fingers on the platform grips as shown below.
Using the Port Replicator Understanding the Basics 1- 12 To undock the OmniBook 1. Raise the release lever at the top of the port replicator. 2. After removing the OmniBook, push the release lever back into place. To reset the OmniBook You can reset the OmniBook without undocking.
Using the Port Replicator Understanding the Basics 1- 13 To attach a security cable Your port replicator has a built-in security port that allows you to secure the port replicator with a cable. Be sure to use a second Kensington lock to secure the OmniBook .
Using the Port Replicator Making Connections 1- 14 Making Connections When making connections, notice that the orientation of the ports on the port replicator are the reverse of the OmniBook. Turn the connector cables over when switching from the OmniBook to the port replicator.
Using the Port Replicator Making Connections 1- 15 To connect an external keyboard You can use both the built-in OmniBook keyboard and external keyboard while docked. 1. Attach the keyboard cable to the keyboard port. 2. Dock the OmniBook in the port replicator.
Using the Port Replicator Making Connections 1- 16 To connect a PS/2 mouse The OmniBook has a PS/2 mouse driver installed. When you dock, the OmniBook automatically detects and sets up the mouse. 1. Attach the mouse cable to the mouse port. 2. Dock the OmniBook in the port replicator.
Using the Port Replicator Making Connections 1- 17 To connect a serial mouse 1. Attach the serial mouse cable to the serial port. 2. Dock the OmniBook in the port replicator. 3. Using the TouchPad, click Start, Settings, Control Panel, Mouse, General.
Using the Port Replicator Making Connections 1- 18 To connect a Universal Serial Bus (USB) device Universal Serial Bus (USB) provides a bi-directional serial interface for adding peripheral devices such as game controllers, serial and parallel ports, and scanners on a single bus.
Using the Port Replicator Making Connections 1- 19 To use the monitor stand with an external display The optional monitor stand (HP F1369A), can support a weight of 69 kg (151.8 lb.). When setting up the monitor stand, be sure that the wide edge faces forward, as shown below.
Using the Port Replicator Making Connections 1- 20 To connect a parallel device Use standard parallel cables and adapters available at computer dealers and electronic supply stores to connect parallel devices. 1. Attach the parallel cable to the parallel port.
Using the Port Replicator Making Connections 1- 21 To connect your audio equipment The port replicator provides the following audio ports: 1. Attach the audio cable to the corresponding audio port. 2. Dock the OmniBook in the port replicator. Speaker-out Line-in You can press Fn+F7 to mute the sound.
.
1- 23 2 Troubleshooting.
1- 24 Troubleshooting There are many ways to get information and technical support for your OmniBook and port replicator. If you have a question about your port replicator that this manual does not an.
Troubleshooting Solving Problems 1- 25 Solving Problems If you have a problem using the port replicator, find the symptom that matches your situation. Try the suggestions one at a time.
.
1- 27 3 Specifications and Regulatory Information.
1- 28 Specifications and Regulatory Information Your OmniBook port replicator is designed to provide trouble-free operation. The following suggestions can help you while working with your OmniBook: ♦ If you have problems, see the problem-solving suggestions and references listed in chapter 2.
Specifications and Regulatory Information Specifications 1- 29 Specifications Ports 240-pin docking connector. Parallel DB25 (EPP/ECP). Serial DB9 (115,200-bps). VGA port, D-sub 15-pin female connector. 6-pin external keyboard connector. 6-pin external PS/2 mouse connector.
Specifications and Regulatory Information Regulatory Information 1- 30 Regulatory Information This section presents information that shows how the port replicator complies with regulations in certain regions.
Specifications and Regulatory Information Regulatory Information 1- 31 Canada This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.
Specifications and Regulatory Information Regulatory Information 1- 32 Declaration of Conformity Products sold by Hewlett-Packard and its authorized dealers meet the specifications listed below, according to ISO/IEC Guide 22 and EN 45014. Manufacturer: Hewlett-Packard Company Address: Hewlett-Packard Co.
1- 33 Index A ac power, 1 -10 audio connections, 1 -21 MIDI devices, 1 -20 mute key, 1 -21 troubleshooting, 1 -25 B BIOS Setup, 1 -15 C cable security, 1 -13 connecting, 1 -17 ac power, 1 -10 external.
1- 34 P parallel device connecting, 1 -20 troubleshooting, 1 -25 ports ac, 1 -10 ac adapter, 1 -10 display, 1 -18 keyboard, 1 -15 MIDI/Joystick, 1 -20 printer, 1 -20 serial device, 1 -17 power, 1 -29 .
デバイスHP (Hewlett-Packard) F1381Aの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
HP (Hewlett-Packard) F1381Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) F1381Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) F1381Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) F1381Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) F1381Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) F1381Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) F1381Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) F1381Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。