HP (Hewlett-Packard)メーカーPSC 2350の使用説明書/サービス説明書
ページ先へ移動 of 136
HP P S C 2 3 5 0 se r ies all-in-one Us er Guide.
HP PSC 2350 series all-in-one User Guide.
© Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws.
Contents 1 HP all-in-one overview ........... ........ ......... ........ .......... ......... ....... ......... ........... .......5 The HP all-in-one at a glance.......... ........ .......... ........ .......... ........ .......... ......... ...... .
Resize an original to fit onto letter or A4 paper....... ........... ............ ............. ........ ..55 Copy a faded original....................... ....................... ....................... ................... ....56 Copy a document that has been faxed several times .
Warranty upgrades....... ........... ............ ........... ........... ............ ........... ........... .......117 Returning your HP all-in-one for service.. ...... ........... ......... ........ ......... ........ ........117 Hewlett-Packard limited global warranty statement.
4 HP PSC 2350 series all-in-one.
1 HP all-in-one overview Many HP all-in-one functions can be accessed directly, without turning on your computer. Tasks such as making a copy or printing photos from a memory card can be accomplished quickly and easily from your HP all-in-one.
Label Description 9 Rear clean-out door 10 Rear USB port 11 Power connection Control panel overview This section describes the functions of the various buttons, lights, and arrows on the HP all-in-one control panel.
Control panel features Label Name and Description 1 Color graphics display : View menus, photos, and messages. The color graphics display can be pulled up and angled for better viewing. 2 On : Turn the HP all-in-one on or off. When the HP all-in-one is off, a minimal amount of power is still supplied to the device.
Label Name and Description 3 Setup : Access the menu system for reports, maintenance, and help. 4 Left arrow : Decrease values, or go back when viewing photos on the color graphics display. 5 OK : Select a menu, setting, or value displayed on the color graphics display.
Color graphics display icons The following icons appear at the bottom of the color graphics display to provide important information about your HP all-in-one. Icon Purpose Shows that a print cartridge is nearly empty. The color on the bottom of the icon corresponds to the color on the top of the print cartridge.
Scan To menu The Scan To menu lists scan destinations, including applications installed on your computer. Therefore, your Scan To menu might list scan destinations different than the ones shown here. Scan To (USB - Windows) 1. HP Image Zone 2. Microsoft PowerPoint 3.
Setup Menu 1. Help Menu 2. Print Report 3. Tools 4. Preferences Use the HP Image Zone to do more with your HP all-in- one The HP Image Zone software is installed on your computer when you set up your HP all-in-one. For further information, see the Setup Guide that came with your device.
Button Name and Purpose Scan Picture : Scans a photo, picture, or drawing and displays it in the HP Image Zone . Scan Document : Scans a document that contains text or both text and graphics, and displays it in your selected program.
Note If you install more than one HP all-in-one, an HP Image Zone icon for each device is displayed in the Dock. For example, if you have an HP scanner and an HP all-in-one installed, two HP Image Zone icons are present in the Dock, one for each device.
Products Icon Feature and Purpose Scan Picture : Use this feature to scan an image and display it in the HP Gallery . Scan to OCR : Use this feature to scan text and display it in the selected destination text editing software program. Note Availability of this feature varies by country/region.
Display the HP Image Zone Dock menu The HP Image Zone Dock menu provides a shortcut to HP Image Zone services. The Dock menu automatically contains all of the applications available in the HP Image Zone window Services tab list.
Note The icons in the table below might appear differently on your computer. The HP Director menu is customized to display feature icons associated with the device that is selected. If the selected device is not equipped with a particular feature or function, then the icon for that feature or function does not display.
2 Find more information A variety of resources, both printed and onscreen, provide information about setting up and using your HP all-in-one. Setup Guide The Setup Guide provides instructions for setting up your HP all-in-one and installing software. Make sure you follow the steps in order.
can do with the HP Image Zone software and your HP devices. ● If you need further assistance or want to check for HP software updates, see the Troubleshooting and support topic. Onscreen help from your device Onscreen help is available from your device and contains additional information on select topics.
3 Connection information Your HP all-in-one comes equipped with a USB port so you can connect directly to a computer using a USB cable. It also has networking capability which can be accessed by using an external print server (HP JetDirect 175x).
Use Windows printer sharing If your computer is on a network, and another computer on the network has an HP all- in-one connected to it by means of a USB cable, you can use that device as your printer using Windows printer sharing.
3 Insert the installation CD that was supplied with the HP JetDirect into your computer's CD-ROM drive. You will use this CD to locate the HP JetDirect on the network. 4 Select Install to run the HP JetDirect installer. 5 When prompted, insert the HP all-in-one installation CD.
Use Webscan Webscan lets you perform a basic scan through the HP JetDirect 175x using just a Web browser. It also lets you perform the scan from your HP all-in-one without the device software installed on your computer. Just enter the IP address of the HP JetDirect in a Web browser and access the HP JetDirect embedded Web server and Webscan.
4 Work with photos Your HP all-in-one allows you to transfer, edit, share, and print photos in several different ways. This chapter contains a brief overview of the wide range of options for performing each of these tasks, depending on your preferences and computer setup.
Transfer photos using a Macintosh The graphic below shows several methods for transferring photos to your Macintosh, HP all-in-one, or a memory card. For more information, see the list below the graphic. A Transfer a photo from a memory card inserted into your HP all-in-one to your Macintosh.
A Edit a photo on your Windows PC using the HP Image Zone software. B Edit a photo using the control panel on your HP all-in-one. Edit photos using a Macintosh The graphic below shows three methods for editing photos using a Macintosh. For more information, see the list below the graphic.
Share photos You have several different options for sharing photos with friends and family. For more information, see the section below specific to your operating system. Share photos using a Windows PC The graphic below shows several methods for sharing photos using a Windows PC.
A Print photos from your HP digital camera using PictBridge. B Print photos from your camera using a software application on your computer. C Print photos from a memory card using the control panel on the HP all-in-one. D Print photos from a memory card by transferring photos to your Windows PC and printing them using the HP Image Zone software.
A Print photos from your HP digital camera using PictBridge. B Print photos from your camera using a software application on your computer. C Print photos from a memory card using the control panel on the HP all-in-one.
5 Load originals and load paper This chapter provides instructions for loading originals on the glass to copy or scan; guidelines for choosing the best paper type for your job; instructions for loading paper in the paper tray; and tips for avoiding paper jams.
Choose papers for printing and copying You can use many types and sizes of paper in your HP all-in-one. Review the following recommendations to get the best printing and copying quality. Whenever you change paper types or sizes, remember to change those settings.
We do not recommend copying to the follow ing papers: ● Any size paper other than letter, A4, 10 by 15 cm (4 by 6 inch), 5 by 7 inch, Hagaki, or L (Japan only). ● Paper with cutouts or perforations (unless specifically designed for use with HP inkjet devices).
3 Squeeze and hold the tab on the top of the paper-width guide, then slide the paper-width guide to its outermost position. 4 Tap a stack of paper on a flat surface to align the edges, and then check the paper for the following: – Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
Load 10by 15cm (4by 6inch) photo paper You can load 10 by 15 cm (4 by 6 inch) photo paper into the paper tray of your HP all- in-one. For the best results, use a recommended type of 10 by 15 cm (4 by 6 inch) photo paper. For more information, see Recommended papers .
2 Insert the stack of cards into the far right side of the paper tray with the short edge forward and the print side down. Slide the stack of cards forward until it stops. 3 Squeeze and hold the tab on the top of the paper-width guide, then slide the paper-width guide inward against the stack of cards until it stops.
Note Not all paper sizes and paper types are available with all the functions on the HP all-in-one. Some paper sizes and paper types can only be used if you are starting a print job from the Print dialog box in a software application. They are not available for copying or printing photos from a memory card or digital camera.
● Adjust the paper-width guide in the paper tray to fit snugly against all paper. Make sure the paper guide does not bend the paper in the paper tray. ● Do not force paper too far forward in the paper tray. ● Use paper types that are recommended for your HP all-in-one.
6 Use a memory card or PictBridge camera The HP all-in-one can access the memory cards used in most digital cameras so you can print, store, manage, and share your photos.
The slots are configured as follows (from top to bottom): ● SmartMedia, xD-Picture Card (fits in top right of the slot) ● Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (with user-supplie.
This saves all the new photos from the memory card to your computer. For Windows : by default, files are saved in month and year folders depending on when the photos were taken. The folders are created in a C:Documents and SettingsusernameMy DocumentsMy Pictures folder in Windows XP and Windows 2000.
3 If there are more than 20 photos on the card, the Select Photos Menu appears. Press the number next to the command you want to select: – 1. All – 2. Last 20 – 3. Custom Range Note Use the proof sheet index number to select which photos to print for a custom range.
Note If you need more control over print settings than the proof sheet provides, you can print photos directly from the control panel. For more information, see Print photos directly from a memory card . Scan a proof sheet The final step in using a proof sheet is to scan the completed sheet you have placed on the scanner glass.
You access and set photo print options from the Photo Menu available through the control panel. Tip You can also use the HP Image Zone software to set photo print options.
Setting Description 5. Layout Style Lets you select one of three layout styles for the current print job. The Paper Saver layout fits as many photos on the paper as possible, rotating and cropping photos if necessary. The Album layouts keep the orientation of the original photos.
The Print Options menu reappears when you confirm a new setting for any option. 3 Press 8 when the Print Options menu is showing, and then press OK when prompted to set new defaults.
Note When printing photos, you should select options for the correct paper type and photo enhancement. For more information, see Set photo print options . You might also want to use the photo print cartridge for superior print quality. For more information, see Use a photo print cartridge .
Print photos from a PictBridge-compatible digital camera The HP all-in-one supports the PictBridge standard, which lets you connect any PictBridge-compatible camera to the camera port and print JPEG photos contained on the memory card in the camera. 1 Make sure the HP all-in-one is turned on and that the initialization process is finished.
Note Not all digital cameras allow you to tag your photos for printing. See your digital camera documentation to see if it supports DPOF. Your HP all-in-one supports DPOF file format 1.
Share photos through HP Instant Share The HP all-in-one and its software can help you share photos with friends and family members using a technology called HP Instant Share. You can use HP Instant Share to: ● Share photos with friends and relatives through e-mail.
7 Use the copy features The HP all-in-one allows you to produce high-quality color and black-and-white copies on a variety of paper types, including transparencies.
Paper type Suggested paper size settings Letterhead Letter or A4 Photo papers 4 x 6 in. (with tab), 5 x 7 in., letter, A4, or appropriate listed size Borderless photo (4 x 6 in.
Paper type Control panel setting HP Everyday Photo Paper, Semi Gloss Everyday Matte Other photo paper Other Photo HP Iron-On Transfer (for color fabrics) Iron-On HP Iron-On Transfer (for light or whit.
Change default copy settings To set default copy settings from the control panel 1 Make any needed changes to the settings in the Copy Menu . 2 Press 9 to select Set New Defaults from the Copy Menu . 3 Press OK to accept the settings as the new default settings.
To copy a two-page document from the control panel 1 Make sure you have paper loaded in the paper tray. 2 Load the first page of your original face down on the right front corner of the glass. 3 Press Copy , if not already lit. 4 Press Start Copy Black .
Tip If the output is not borderless, then set the paper size to 5x7 Borderless or 4x6 Borderless , set the paper type to Photo Paper , set the Photo enhancement, and then try again. For more information on how to set the paper size, see Set the copy paper size .
Tip If the output is not borderless, then set the paper size to Letter or A4 , set the paper type to Photo Paper , set the Photo enhancement, and then try again. For more information on how to set the paper size, see Set the copy paper size . For information on how to set the paper type, see Set the copy paper type .
Tip You can also use Fit to Page to enlarge a small photo to fit within the printable area of a full-size page. In order to do this without changing the proportions of the original or cropping the edges, the HP all-in-one might leave an uneven amount of white space around the edges of the paper.
Copy a document that has been faxed several times You can use the Enhancements feature to adjust the quality of text documents by sharpening edges of black text or adjust photographs by enhancing light colors that might otherwise appear white. The Mixed enhancement is the default option.
It is easy to set Enhancement settings for photos and other documents you copy by using the HP Image Zone software that came with your HP all-in-one. With one click of your mouse button, you can set a.
Tip Practice applying a T-shirt transfer on an old garment first. 1 Load the iron-on transfer paper in the paper tray. 2 Load your original face down on the right front corner of the glass. If you are copying a photo, position the photo on the glass so the long edge of the photo is along the front edge of the glass.
Chapter 7 60 HP PSC 2350 series all-in-one Use the copy features.
8 Use the scan features Scanning is the process of converting text and pictures into an electronic format for your computer. You can scan just about anything: photos, magazine articles, text documents, and even 3D objects, as long as you are careful not to scratch the glass on your HP all-in-one.
Note The menus shown in this section may vary in content depending on your computer's operating system and which applications you set up as scan destinations in the HP Image Zone . 1 Load the original face down on the right front corner of the glass.
Stop scanning ➔ To stop scanning, press Cancel on the control panel, or in HP Image Zone , click Cancel . User Guide 63 Scan.
Chapter 8 64 HP PSC 2350 series all-in-one Scan.
9 Print from your computer The HP all-in-one can be used with any software application that allows printing. The instructions vary slightly depending whether you are printing from a Windows PC or a Macintosh. Make sure you follow the instructions for your operating system in this chapter.
2 Select the HP all-in-one in the Chooser (OS 9), Print Center (OS 10.2 or earlier), or Printer Setup Utility (OS 10.3 or later) before you begin printing. 3 From the File menu in your software application, choose Page Setup . The Page Setup dialog box appears, allowing you to specify the paper size, orientation, and scaling.
Macintosh users Use the Page Setup and Print dialog boxes to change the settings for your print job. Which dialog box you use depends on which setting you want to change. To change the paper size, orientation, or scaling percentage 1 Select the HP all-in-one in the Chooser (OS 9), Print Center (OS 10.
Chapter 9 68 HP PSC 2350 series all-in-one Print from your computer.
10 Use HP Instant Share HP Instant Share makes it easy to share photos with family and friends. Just scan a photo or insert a memory card into the appropriate card slot on your HP all-in-one, select one or more photos to share, select a destination for your photos, and then send the photos on their way.
Once you have set up your HP all-in-one and installed the HP Image Zone software, you are ready to start sharing photos using HP Instant Share. For more information on setting up your HP all-in-one, see the Setup Guide that came with your device. Send images using your HP all-in-one Images can be photos or scanned documents.
Note If you click See All Services , you can choose from among all of the services available in your country/region, for example: HP Instant Share E-mail and Create Online Albums . Follow the onscreen instructions. The Go Online screen appears in the Work area.
Selection Tray. For more information on the HP Image Zone , see Use the HP Image Zone in the onscreen help. For Macintosh users, the HP Instant Share client application software opens on your computer. A thumbnail of the scanned image appears in the HP Instant Share wi ndow .
Send images using your computer In addition to using your HP all-in-one to send images through HP Instant Share, you can use the HP Image Zone software installed on your computer to send images.
field followed by @send.hp.com. You will be prompted to sign in to HP Instant Share with your HP Passport userid and password . Note If you have not previously set up HP Instant Share, click I need an HP Passport account on the Sign in with HP Passport screen.
Share images using the HP Director (Macintosh OS earlier than X v10.1.5) Note Macintosh OS 9 v9.1.5 and later and v9.2.6 and later are supported. Macintosh OS X v10.0 and v10.0.4 are not supported. Share images with anyone who has an e-mail account. Simply start the HP Director and open the HP Gallery .
Chapter 10 76 HP PSC 2350 series all-in-one Use HP Instant Share.
11 Order supplies You can order recommended types of HP paper and print cartridges online from the HP website. ● Order paper, transparency film, or other media ● Order print cartridges ● Order o.
Order other supplies To order other supplies, such as HP all-in-one software, a copy of the printed User Guide, a Setup Guide, or other customer-replaceable parts, call the appropriate number below: ● In the U.S. or Canada, dial 1-800-HP-INVENT (1-800-474-6836).
12 Maintain your HP all-in-one The HP all-in-one requires little maintenance. Sometimes you might want to clean the glass and lid backing to remove surface dust and ensure that your copies and scans remain clear. You will also need to replace, align, or clean your print cartridges occasionally.
Clean the exterior Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains off the case. The interior of the HP all-in-one does not require cleaning. Keep fluids a way from the control panel and the interior of the HP all-in-one.
The HP all-in-one prints a self-test report, which might indicate the source of the printing problem. A sample of the ink test area of the report is shown below. 4 Make sure the test patterns are even and show a complete grid. If more than a few lines in a pattern are broken, this might indicate a problem with the nozzles.
Handle the print cartridges Before you replace or clean a print cartridge, you should know the part names and how to handle the print cartridges. 1 Copper-colored contacts 2 Plastic tape with pink pull tab (must be removed before installing) 3 Ink nozzles under tape Hold the print cartridges by their black plastic sides, with the label on top.
to ww w.hp.com . If prompted, choose your country/region, follow the prompts to select your product, and then click one of the shopping links on the page.
1 Print cartridge slot for the tri-color print cartridge 2 Print cartridge slot for the black and photo print cartridges 4 Pull the print cartridge toward you out of its slot. 5 If you are removing the black print cartridge in order to install the photo print cartridge, store the black print cartridge in the print cartridge protector.
7 Slide the new print cartridge forward into the empty slot. Push the print cartridge forward until it clicks into place. If the print cartridge you are installing has a white triangle on its label, slide the print cartridge into the slot on the left.
When you want to print regular text documents, swap the black print cartridge back in. Use a print cartridge protector to keep your print cartridge secure when it is not being used. ● For more information on purchasing a photo print cartridge, see Order print cartridges .
Align the print cartridges The HP all-in-one prompts you to align cartridges every time you install or replace a print cartridge. You can also align the print cartridges at any time from the control panel or by using the HP Image Zone software on your computer.
If copy or print quality still seem poor after you clean the print cartridges, try cleaning the print cartridge contacts before replacing the affected print cartridge. For information on cleaning the print cartridge contacts, see Clean the print cartridge contacts .
1 Copper-colored contacts 2 Ink nozzles (do not clean) 8 Slide the print cartridge back into the slot. Push the print cartridge forward until it clicks into place. 9 Repeat if necessary for the other print cartridge. 10 Gently close the print-carriage access door and plug the power cord into the back of the HP all-in-one.
Note Do not remove both print cartridges at the same time. Remove and clean each print cartridge one at a time. Do not leave a print cartridge outside the HP all-in-one for more than 30 minutes. 4 Place the print cartridge on a piece of paper with the ink nozzles facing up.
You can choose 1, 4, 8, or 12 hours for the power save time. Set the prompt delay time The Prompt Delay Time option allows you to control the amount of time that passes before a message prompts you to take further action.
Chapter 12 92 HP PSC 2350 series all-in-one Maintain your HP all-in-one.
13 Troubleshooting information This chapter contains troubleshooting information for the HP all-in-one. Specific information is provided for installation and configuration issues, and some operational topics. For more troubleshooting information, see the onscreen HP Image Zone Help file that came with your software.
– HP Image Zone Help : The onscreen HP Image Zone Help describes how to use the HP all-in-one with a computer and contains additional troubleshooting information not covered in the User Guide. – Readme file : The Readme file contains information on possible installation problems.
Solution Make sure each of the power cords is firmly connected, and wait a few seconds for the HP all-in-one to turn on. Also, if the HP all-in-one is plugged in to a power strip, make sure the power strip is turned on.
I received a message on the color graphics display to attach the control panel overlay Solution This might mean the control panel overlay is not attached, or it is attached incorrectly. Make sure to align the overlay over the buttons on the top of the HP all-in-one and snap it firmly into place.
You can confirm the language and country/region by printing a Self-Test Report , as follows: 1 Press Setup . 2 Press 1 , and then press 4 . This selects Print Report , and then selects Self-Test Report .
I received a message on the color graphics display that the print cartridge alignment failed Cause The incorrect type of paper is loaded in the paper tray. Solution If you have colored paper loaded in the paper tray when you align the print cartridges, the alignment fails.
Reinsert the print cartridges and verify that they are fully inserted and locked in place. Cause The contacts on the print cartridge are not touching the contacts in the print carriage. Solution Remove and then reinsert the print cartridges. Verify that they are fully inserted and locked in place.
● Check other printers or scanners. You might need to disconnect older products from your computer. ● If your HP all-in-one is networked, see the Network Guide that came with your HP all-in-one. ● After you check the connections, try restarting your computer.
Software installation troubleshooting If you encounter a software problem during installation, see the topics below for a possible solution. If you encounter a hardware problem during installation, see Hardware setup troubleshooting .
2 Verify that the USB and power cables are plugged in. 3 Verify that the USB cable is set up properly as follows: – Unplug the USB cable and plug it in again. – Do not attach the USB cable to a keyboard or non-powered hub. – Verify that the USB cable is 3 meters or less in length.
Solution ➔ In Windows, you can access the registration screen from the Windows taskbar by clicking Start, pointing to Programs or All Programs (XP), Hewlett- Packard , HP PSC 2350 series all-in-one , and then clicking Sign up now .
After connecting and turning on your HP all-in-one, you might have to wait several minutes for all of the Plug and Play events to complete. 9 Follow the onscreen instructions. When the software installation is complete, the Status Monitor icon appears in the Windows system tray.
2 Double-click the Applications: HP All-in-One Software folder. 3 Double-click HP Uninstaller . Follow the onscreen instructions. 4 After the software is uninstalled, disconnect your HP all-in-one, and then restart your computer. Note It is important that you disconnect your HP all-in-one before restarting your computer.
Caution Trying to clear a paper jam from the front of the HP all-in-one can damage the print mechanism. Always access and clear paper jams through the rear clean-out door.
Solution iPhoto handles still photos only. To manage both video clips and still images, use Unload Images from the HP Director instead. Device update Several means are provided to update your HP all-in-one. Each involves downloading a file to your computer to start the Device Update Wizard .
Note If you disrupt the update, or an error message indicates the update failed, call HP support for assistance. After your HP all-in-one restarts, an update complete screen appears on your computer 7 Your device is updated. It is now safe to use your HP all-in-one.
14 Get HP support Hewlett-Packard provides Internet and phone support for your HP all-in-one. This chapter provides information on how to get support from the Internet, contact HP customer support, ac.
Note If your HP all-in-one is not turning on, you can view the serial number by looking at the sticker above the rear cleanout door. The serial number is the 10-character code in the upper left corner of the sticker. To access your serial number and service ID 1 Press and hold OK .
Country/Region HP technical support Country/Region HP technical support Belgium (Dutch) +32 070 300 005 Morocco 1 +212 22 404747 Belgium (French) +32 070 300 004 Netherlands (0.
Country/Region HP technical support Country/Region HP technical support Germany (0.12 Euro/ min.) +49 (0) 180 5652 180 Spain +34 902 010 059 Greece (Cyprus to Athens toll free) 800 9 2649 Sri Lanka fa.
Call HP Korea customer support Call HP Japan support TEL : 0570-000-511 03-3335-9800 FAX : 03-3335-8338 9:00 17:00 10:00 17:00 1/1 3 FAX User Guide 113 Get HP support.
HP Quick Exchange Service (Japan) HP Quick Exchange Service 0570-000511 :03-3335 -9800 : 9:00 5:00 10:00 5:00 1 1 3 : Prepare your HP all-in-one for shipment If after contacting HP Customer Support or.
6 Press the On button to turn off the HP all-in-one. 7 Unplug the power cord, and then disconnect it from the HP all-in-one. Do not return the power cord with the HP all-in-one. Warning The replacement HP all-in-one will not be shipped with a power cord.
If you do not have the original packaging materials, please use other adequate packaging materials. Shipping damage caused by improper packaging and/or improper transportation is not covered under the warranty. 11 Place the return shipping label on the outside of the box.
15 Warranty information Your HP all-in-one comes with a limited warranty that is described in this section. Information about how to obtain warranty service and how you can upgrade your standard factory warranty is also provided.
Hewlett-Packard limited global warranty statement Extent of limited warranty Hewlett-Packard ("HP") warrants to the end-user customer ("Customer") that each HP PSC 2350 series all-.
OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Local law This Limited Warranty Statement gives the Customer specific legal rights.
P-Oeiras Deutschland Hewlett-Packard GmbH Herrenberger Straße 110-140 D-71034 Böblingen Österreich Hewlett-Packard Ges.m.b.H. Lieblgasse 1 A-1222 Wien España Hewlett-Packard Española S.
16 Technical information The technical specifications and international regulatory information for your HP all-in-one are provided in this section. This chapter provides information on system requirem.
Paper sizes Type Size Paper Letter: 216 by 280 mm (8.5 by 11 inches) A4: 210 by 297 mm A5: 148 by 210 mm Executive: 184.2 by 266.7 mm (7.25 by 10.5 inches) Legal: (216 by 356 mm) (8.5 by 14 inches) Envelopes U.S. #10: 105 by 241 mm (4.125 by 9.5 inches) U.
Print margin specifications Top (leading edge) Bottom (trailing edge) 1 Paper or transparency film U.S. (Letter, Legal, Executive) 1.8 mm (0.07 inches) 6.7 mm (0.3 inches) ISO (A4, A5) and JIS (B5) 1.8 mm (0.07 inches) 6.7 mm (0.3 inches) Envelopes 3.
Mode Speed (ppm) Print resolution (dpi) Scan resolution (dpi) 1 Best Black up to 0.8 1200 by 1200 1200 by 2400 Color up to 0.8 1200 by 1200 2 1200 by 2400 Normal Black up to 7 600 by 1200 600 by 1200 Color up to 4 600 by 600 600 by 1200 Fast Black up to 23 300 by 1200 600 by 1200 Color up to 18 600 by 300 600 by 1200 1 Maximum at 400% scaling.
Environmental specifications ● Recommended operating temperature range: 15º to 32º C (59º to 90º F) ● Allowable operating temperature range: 5º to 40º C (41º to 104º F) ● Humidity: 15% t.
Plastics Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the product’s life. Material safety data sheets Material safety data sheets (MSDS) can be obtained from the HP website at: www.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. For more information, contact the Product Regulations Manager, Hewlett-Packard Company, San Diego, (858) 655-4100.
Declaration of conformity DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 __________________________________________________________________________ Manufacturer’s Name: Hewlett.
Index Symbols/Numerics 10 by 15 cm photo paper, load 33 4 by 6 inch photo paper, load 33 A A4 paper, load 31 align print cartridges 87 B best copy quality 51 borderless copies 10 by 15 cm (4 by 6 inch) photo 53 fill entire page 54 borderless photos print from memory card 45 C cancel copy 59 print job 67 scan 63 cancel button 8 cartridges.
HP Image Print (OS X HP Image Zone) 14 HP Image Zone HP Instant Share 73, 74 Macintosh 12, 15, 74 overview 11 Windows 11, 12, 73 HP Instant Share about 69 e-mail 48 e-mail photos from a memory card (U.
postcards, load 33 posters copy 58 power save mode 90 power specifications 124 print cancel job 67 from computer 65 from software application 65 photos from DPOF file 46 photos from memory card 44 pri.
power specifications 124 print margin specifications 123 print specifications 123 scan specifications 124 system requirements 121 weight 124 telephone numbers, customer support 109 text enhance on cop.
www .hp.com *Q5786-90178* *Q5786-90178* Q5786-90178 © 2004 He wlett-P ack ar d Dev elopment Compan y , L.P . Pr inted on at leas t 50% tot al r ecyc led fiber w ith at least 10% post-consumer paper E.
デバイスHP (Hewlett-Packard) PSC 2350の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) PSC 2350をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) PSC 2350の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) PSC 2350の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) PSC 2350で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) PSC 2350を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) PSC 2350の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) PSC 2350に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) PSC 2350デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
