HP (Hewlett-Packard)メーカーVP6100の使用説明書/サービス説明書
ページ先へ移動 of 35
HP VP6100 Series Digital Pr ojector User’ s Guide.
Notice Copyright © 2003 b y Hewlett-Packard. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated i nto any languag.
T able of Contents 3 Table of Contents User’ s Guide Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T able of Contents 4 User’ s Guide Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 9 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introducti on 5 User’ s Guid e INTR ODUCTION Wa r n i n g T O PREVENT SHOCK, DO NO T OPEN THE CABINET . NO USER –SER- VICEABLE P AR TS INSIDE. REFER SE R VICING T O QU ALIFIED SER VICE PERSONNEL. PLEASE READ THIS USER’S GUIDE BEFORE Y OU OPER- A TE Y OUR PROJECT OR.
Intr oduction 6 User’ s Guid e Shipping Contents The pr ojector is shipped with the cables r equired f or connection to stan dard PC or laptop computers. Car efully unpack and verify t hat you ha ve all the items sho wn below . If any o f these items ar e missing, please contact personnel at the place of pur chase .
Introducti on 7 User’ s Guid e Pr ojector Description Pr ojector External contr ol panel (see next page) Audio/ Video connector Pr ojection lens Audio jack Fr ont adjuster USB mouse connector IR rem.
Intr oduction 8 User’ s Guid e External Contr ol P anel Po w e r T urns the pro jector on or off. Auto Sync Automatically determines the best picture se ttings for current received signals. < > ^ v Menu Menu displays the men u system and closes the men u system.
Introducti on 9 User’ s Guid e Adjuster The pr ojector is equipped with 2 quick-r elease adjuster feet. Push the buttons to adjust its tilt angle. 1. Lift the pr ojector up and pr ess the adjuster button to r elease the adjus ter . 2. The adjuster will dr op into position and be lock ed.
Intr oduction 10 User’ s Guide Remote Contr ol Description Remote Contr ol Effectiv e Range The remote sensors a re located on the fr ont and the back of the pr ojector . It can function in a range of 30 degr ees horizontall y and 30 degrees v er tically relat ive to a line that is a right angle to the remote sensors.
Introducti on 11 User’ s Guide Replacing the Batter y Caution Av oid excessive heat and humidi ty . There may be danger of an explosion if batteries ar e incorr ectly r eplaced. Replace onl y with the same or equivalent type re commended b y the manufacturer .
Installation 12 User’ s Guide INSTALLATION Screen Siz e Place the pr ojector at the r equired distance fr om the screen accor ding to the desir e d pictur e size (see the table below).
Installation 13 User’ s Guide • VP6110 (SV GA) screen size chart Connecting to V a rious Equipment The internal speak er is good for a small audience. If you ha ve a larger audience, you ma y want to connect the audio sou rce dire ctly to a sep arate sound system instead of the projecto r .
Installation 14 User’ s Guide Connecting to V arious Equipment It only tak es a few seconds to connect y our projector to y our desktop or notebook computer , VCR, or other systems. How ever , a Mac adapter is neede d for connectio n to Macintosh computers.
Installation 15 User’ s Guide 4. Video device or VCR 5. Output monitor.
Operation 16 User’ s Guide OPERATION Star t Up 1. Plug the pow er cord into the pr ojector and into a wall sock et. 2. T urn on the main power s witch. 3. Press and hold PO WER to start the unit. The back-lit PO WER key fl ashes gr een and sta ys green when the po wer is turned on.
Operation 17 User’ s Guide Digital K eysto ne Corr ection K eystoning r efers to the situation wher e the projected image is noticeably wider at either the top or bottom.
Operation 18 User’ s Guide Sour ce Selection When sev eral input sources ar e available, pr ess the SOURCE k ey to mak e a selection from the remo te contr ol or fr om the menu system. Video and Audio Adjustme nts -- the Menu System 1. On the proj ector or re mote contr ol, press the Menu button.
Operation 19 User’ s Guide Quick T ab FUNCTION DESCRIPTION Sour ce Selects pictur e sour ce. *The operation of this function depends on the Source Scan settin g. Ke y s t o n e Corr ects slanted edges fo the image. Picture mode Adjusts picture f or type of input.
Operation 20 User’ s Guide Adjust T ab FUNCTION DESCRIPTION Brightness Brightens or dark ens the image. Contrast Sets dif ference between light and dark areas. Fr equency Adjusts timing r elative to input signal. *This funct ion is available only when the input source is PC .
Operation 21 User’ s Guide Audio T ab FUNCTION DESCRIPTION Mute Stops audio output. Vo l u m e Changes loudness of audio Tr e b l e Changes loudness of higher fr equencies.
Operation 22 User’ s Guide Setup T ab FUNCTION DESCRIPTION Language Se lects language fo r menus. Use < / > k ey to select the desir ed lan- guage. Po s i t i o n Adjusts the image to ma tch the pr ojector placement. Source scan Sets whether p rojecto r sear ches for input signal.
Operation 23 User’ s Guide PIP T a b These functions ar e a vailable only when the input sour ce is PC and a video or S-video sour ce is also connected. FUNCTION DESCRIPTION Sourc e Selects an input sour ce for the pictur e-in-picture. Size Selects the si ze of the pic- ture-in-pictu re.
Operation 24 User’ s Guide Shutdo wn 1. Press and hold PO WER and a warning message will appe ar . T o turn off the pr ojector , press PO WER again. 2. The fan will continue to run for a pproximatel y two minutes. 3. T urn off the main power s witch.
Maintenance 25 User’ s Guide MAINTENANCE Lamp Information Lamp LED Indicator Lamp Replacement When the Lamp Indicator light s up red or a message appears suggesting the time of lamp r eplacement, please install a new lamp or consult y our dealer . An old lamp could cause a malfunction in the pr ojector and in rar e instances ma y even explo de.
Maintenance 26 User’ s Guide 1. T urn off the projector . Disconnect the pow er cor d fr om the outlet and the pr ojector . 2. Loosen the scr ew and re mov e the lamp cov er . If the lamp is hot, a void burns by waiting 45 minute s until the lamp has cooled.
Maintenance 27 User’ s Guide T emperatur e W arning Indica tor Accessories Y ou can buy HP accessories for your proje ctor , such as the followi ng: • Carrying case • Premi um re mote contr ol (.
T ro ubleshooting 28 User’ s Guide T ROUB L ESHOOTING Common Pr oblems & Solutions PROBLEMS TR Y THESE SOLUTIONS NO PO WER • Mak e sur e the pow er cord is inserted fully i nto the pow er cord socket. • Mak e sur e the pow er cord is inserted fully i nto the pow er outlet.
T r oubleshooting 29 User’ s Guide Status Messa ges On-Screen Messag es Description SEARCHING Proj ector is sear ching for input. A CQUIRING SIGNAL Proj ector has identified the input signal and is running the auto image adjustment function. OUT OF RANGE Input signal fr equency exceeds the pr ojector’ s range .
Specifications 30 User’ s Guide SPECIFICATIONS Pr ojector Specifications T ech nical Specifications Note: All specifications a re subject to change without notice. General Model name VP6120 (XGA) VP6110 (SV GA) Optical Displa y system 1-CHIP DMD Lens F/Number F/2.
Specifications 31 User’ s Guide Timing Char t Resolution H Sync (kHz) V Sync (Hz) Remark 640x350 31.5 70.1 640x400 37.9 85.1 VESA 720x400 31.5 70.0 720x400 37.9 85.1 VESA 640x480 31.5 60.0 VESA 640x480 37.9 72.8 VESA 640x480 35 66.7 Macintosh 640x480 43.
Dimensions 32 User’ s Guide DIMENSIONS Unit: mm 307.5 307.5 242.23 242.23 109.46 109.46.
Regulator y and Safety 33 User’ s Guide REGULATOR Y AND SAFETY This section pr esents information that sho ws how y our digital proje ctor complies wi th regulations in certain regions.
Regulatory and Safety 34 User’ s Guide to Identify and Resolve Radio-TV Interference Pr oblems . This booklet is a vailable fr om the U .S. Gov ernment Printing Office, W ashington, DC 20402, Stock Number 004-000-00345-4. At the first printing of this manual, the telepho ne number was (202) 512-1800.
Regulator y and Safety 35 User’ s Guide Eur opean Union NOTE : For regulatory identification pur poses, your product is assign ed a Regulatory Model Number . The Regu latory Model Number for your product is listed in the declaration below . Thi s regulatory number is different from the marketing name and produ ct number .
デバイスHP (Hewlett-Packard) VP6100の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) VP6100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) VP6100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) VP6100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) VP6100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) VP6100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) VP6100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) VP6100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) VP6100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
