HP (Hewlett-Packard)メーカーW185の使用説明書/サービス説明書
ページ先へ移動 of 30
v185e/v185es / v185w/v185ws / w185 / w185e / W185q LCD Monitor User ’ s Guide.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein shoul d be construed as constituting an ad ditional warranty . HP shall not be li able for tech nical o r editorial errors or omissions contained herein.
Preface About This Guide This guide is intended for anyone who uses the v185e / v185es / v185 w / v185ws / w185 / w185e / W185q LCD Monitor. It describes the monitor’s features, setup, an d operation.
Safety and Maintenance Guidelines Import ant Safety Information The power cord is desi gned for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. For informat ion on the correct power cord set to use with your monitor, see Power Cord Set Requi rem ents .
y Install your monitor n ear an outlet that you can easi ly reach. Disconnect the m onitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor b y pulling the cord. y Do not allow anything to rest on the power cord.
Setup Base and Tilt Att aching the Base 1 Set the panel face down on a flat , protected surface , such as a table top. 2 Using both hands , align the ba se with the pedestal and push in fi rmly to lock in place. Make sure that the base is securely locked in place before contin ui ng with the setup procedure.
Removing the Base 1 Set the panel face-down on a flat, protected surfa ce. 2 Squeeze the t abs in the b ottom of the base to release the lock. 3 Remove the base from the pedest al. CAUTION: To prevent damage, avoid applying pressure to the panel front.
Cables Att aching the Cables 1 T urn off your computer . 2 If you are attaching a VGA cable, connect one end of the 15-pin D-Sub VGA cable (blue connector) to the back of the monitor and connect the other end to the com puter VGA port.
4 Connect one end of the powe r co rd to the back of the monitor and plug the other end into a grounded outlet. 5 T urn on your monitor and computer . If your monitor displays an image, installation is complete. If it does not display an image, see Technical Support FA Qs and Using the Monitor .
W all Mounting Arm Prep aring to Inst all a W all Mounting Arm (Not supplied) This monitor can be attached to a wall m ounting arm that you purchase separately. CAUTION: Before disassembling the monito r, turn off the monitor pow er, an d disconnect all power, v ideo, and audio cables.
Using the Monitor Operating Instructions Control buttons are locate d on the front of the panel, as shown below. Use the Menu button ( B ) to adjust the display settings to your personal preferences: y Set up the monitor , attach the cables, and adjust the tilt as described in the Setup section above.
External Controls A Auto button Automatically fine-tunes the image quali ty. B Menu button Opens, selects, or exits the OSD menu. C – (minus) button Navigates backward through the OSD menu a nd decreases adjustment levels. If the OSD menu is inactive, activates the Volume decrease.
Settings Setting the Optimal Resolution The recommende d re solution for this monitor is 1366 x 768.To conf igure the mo nitor to this resolution, complete the setup procedure a nd ma ke sure that the monitor is connected to the computer.
Adjusting On-Screen Disp lay Settings Use the OSD menu to adjust the screen image a nd change setting s. To access the OSD menu: 1 If the monitor is not already on, press the Power button to turn the monitor o n. 2 Press the Menu button to activate the OSD menu.
OSD Menu The table below shows the OSD menu s and their functions at each level. OSD Menu Levels Level 1 Level 2 Level 3 Lev el 4 Factory Preset Switch Vide o Input (w185 / W185q only) Brightness Adju.
OSD Menu Levels ( continued ) Level 1 Level 2 Level 3 Lev el 4 Factory Preset Quick View Movie Photo Gaming Text Y Custom Cancel Save and Return Language Deutsch 简体中文 日本語 English English.
OSD Menu Levels ( continued ) Level 1 Level 2 Level 3 Lev el 4 Factory Preset Cancel Save and Return OSD Control (v185w only) Horizontal OSD Position Adjustment Scale Y Vertical OSD Position Adjustmen.
Inst alling Drivers and Using the Auto-Adjustment Feature Downloading Driv ers a nd Sof tware To download the latest version of drivers and softwa r e files from the HP Support Web site: 1 Refer to: http://www .hp.com/support 2 Select your country/region.
T echnical Support F AQs T echnical Support F AQs (Frequently Asked Questions) Problem & Question Possible Solutions Power LED is not on. y Make sure the Power button is on an d the power cord is properly connected to a grounded p owe r outlet and to the monitor .
T echnical Support F AQs (Frequently Asked Questions) ( continued ) Problem & Question Possible Solutions Missing one of the primary colors (red, green, or blue). y Inspect the monitor ’ s vid eo cable and make sure that none of the pins are bent.
S pecifications All specifications represent the typical specifications provided by HP ’s component manufa cturers; actual performance may vary either higher or lowe r. v185e / v185es / v185w / v1 85ws / w185 / w185e / W185q Display T y pe 18.51 inches, TFT LCD 47 cm Viewable Image Size 18.
Preset Display Modes Preset Pixel Format Horz Freq (kHz) Horz Polarity Ve r t F r e q (Hz) V ert Polarity Pixel Clk (MHz) Source 1 640 x 480 31.469 - 59.940 - 25.175 VGA 2 640 x 480 37.861 - 72.809 - 31.500 VESA 3 640 x 480 37.500 - 75.000 - 31.500 VESA 4 720 x 400 31.
Power Cord Set Requirement s The monitor power supply is provid ed with automatic line switching (ALS). This feature allows the monitor to operate on input voltages in the range of 100–24 0V ∿ , 50 / 60 Hz, 1.
Plug and Play DDC2B Feature This monitor is equipped wi th VESA DDC2B capa bilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the leve l of DDC used, co mmuni cate additional information about its display capabilities.
Modifications The FCC requires the user to be notif ied that any changes or modification s ma de to this device that are not expressly approved by Hewlett-Pa ckard Company may void the user’s authority to operate the equipment.
European Union Regul atory Notice This product complie s with the following EU directives: y Low V oltage Directive 2006/95/EC y EMC Directive 2004/10 8/EC Compliance with these directives implie s co.
Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its pa ckagi ng indicates that this product must not be disp ose d of with your other household waste.
Jap anese Material Content Declaration A Japanese regulatory requirement, defined by Spe cific ation JIS C 0950, 2005, mandates tha t manufacturers provide Material Content Declarations for ce rtain cate gories of electronic products offered for sale after July 1, 2006.
29.
Part number: 506356-003.
デバイスHP (Hewlett-Packard) W185の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) W185をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) W185の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) W185の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) W185で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) W185を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) W185の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) W185に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) W185デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
