HP (Hewlett-Packard)メーカーXM600の使用説明書/サービス説明書
ページ先へ移動 of 46
HP Kayak XM600 Desktop Troubleshooting Guide Ydts.bok Page 1 Friday, December 17, 1999 10:35 AM.
Notice The infor mation contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, incl uding, but not limited to, the impl ied warranties of merchantability and f itness for a particul ar purpose.
3 Contents Y our PC W orkstat ion does not sta rt correctly, or doe s not start at all. Refer to page 7. For example, the monitor is blank, error mess ages during boot, beep cod es emitted. Y our PC W orkstation starts normally, but you are having pro blems configuri ng.
Intr oduc tion 4 Introduction This manual i s for anyone who wants to: • Trouble shoot p roblems o n the PC Wo rkstatio n • Find out where to get mo re informatio n and suppor t. For infor mation about setting up and using your PC W orkstation, refe r to the User’ s Guide that came with your PC W orkstation.
5 Introd uction Safety Info rmation WARNIN G There is a dange r of explosion if the batter y is incorrectly inst alled. For your safety, neve r attempt to r echarge, disasse mble, or bur n an old bat tery. Only replac e the battery with the sam e or equiva lent ty pe, as recomm ended b y the manufacturer.
Intr oduc tion 6 Ydts.bok Page 6 Friday, December 17, 1999 10:35 AM.
Your PC Workstation Does Not Start Correctly Symp tom Type of Problem Case 1 When the power button is pressed, the P C Workstation sh ows no sign of activ ity at all: • PC Workst ation may not be c orrectly connect ed to the power s upply. Refer to p age 9.
8 Helpful In formation Checking Onboard RIMM and Memory Expansio n Card Memory Installation. Refer to page 13. EMU (Error Message Utility) Description. Refer to page 14. Beep Code Table. Refer to page 16. Troublesho oting BIOS Problems: • Updating the BIOS .
9 Case 1 — If There Is No Activ ity A t All Case 1 — If There Is No Activity At All When the power button is pre ssed, the PC W orkstat ion shows no si gn of activity at all. The mo nitor is blank, there is no sound from the har d disk drive or fan, or the status LED do es not light up.
Case 2 — Monitor Is B lank 10 Case 2 — Monitor Is Blank When the power button is pressed, the PC W orkstation appears to boot (sound fro m the hard disk dri ve and fan, and status LED is green), bu t the monitor is blank. • Hard disk drive and fan can be h eard.
11 Case 2 — Moni tor Is Blan k NOTE If the mon itor goe s blan k or bec omes cor rupt dur ing a Win dows bo ot, refer to “Case 5 — Scre en Goes Blank or Corrupt Im age” on page 1 7.
Case 3 — Detected Har dware Configur ation Error 12 Case 3 — D etected Hardware Configurati on Error When the power button is pressed, the hard disk dri ve or fan can be heard, but the PC W orkstation does not boot. The monitor remains blank and the status LED is red.
13 Case 3 — Detected Hardware Co nfiguration Error Memory Installation NOTE Use onl y the HP memor y modu les provi ded fo r your PC Workstatio n mod el. If you want to fi nd out abo ut availab le acce ssories for your PC Wo rkstatio n, refer to t he HP Access orie s We b site at : http://www.
Case 4 — Boot Process Fails 14 Case 4 — Boot Process Fails When the power button is pre ssed, the PC W orkstat ion starts to boot and there is activity on the monitor , but the boot process then fails with an error message. Status LED flashes red.
15 Case 4 — Boot Process Fails Category # 2: If the error is onl y a warning (i. e. key stuck), the POST should prompt: WARNING 1 1. After a timeout period of five seconds without any interv ention, the system resumes to boot.
Case 4 — Boot Process Fails 16 If There Is a Beep Code During Boot If an error occurs dur ing the POST , which prevents the PC W orkstation from starting, the sy stem issues a beep code befor e attempting to display the erro r in the uppe r left corne r of the screen.
17 Case 5 — Screen Goes Blank or Corrupt Image Case 5 — Screen G oes Blank or Corr upt Image When the power button is pre ssed, the PC W orkstat ion starts to boot and there is in itially some activi ty on th e monitor , but then the scre en goes blank o r the im age is cor rupt.
Case 5 — Screen Goes Blank or Corr upt Image 18 Ydts.bok Page 18 Friday, December 17, 1999 10:3 5 AM.
Configuration Prob lems If your PC W orkstation boots nor mally , but yo u are having pro blems configuring different parts of your PC W orkstation. Symptom T ype of Problem PC Workstation starts to boot, but a POST (Power- On Self-Test ) error me ssage is displayed on the screen.
Conf iguration Proble ms 20 Helpful In formation Troublesho oting BIOS Problems: • Updating the BIOS. Refer to page 31. • Resto ring the BI OS Def aul t Setti ngs. Refer to pa ge 31. • Clearing the CMOS. Refer to page 32. • Reco vering the BIO S (Cris is Mod e).
21 Configuratio n Proble ms If There Is a CMOS Test Error If There Is a CMOS Test Er ror NOTE Before removing the cover, always switc h off the d isplay and PC Workstation. Discon nect the po wer co rd and any ac cesso ry cable s. When checks have bee n compl eted, cl ose th e PC Worksta tion an d reco nnect t he power cord and accessory cable s.
Conf iguration Proble ms If There Is a Keyboard T est Error 22 If There Is a Keyboard Test Err or NOTE Before removing the cover, always switc h off the displa y and PC Work station.
23 Configuratio n Proble ms If There Is a Floppy Disk Drive Test Error If There Is a Floppy Disk Drive Test Erro r NOTE Before removing the cover, always switc h off the d isplay and PC Workstation. Discon nect the po wer co rd and any ac cesso ry cable s.
Conf iguration Proble ms If There Is a Hard Disk, DVD, CD-RW or CD-RO M Test Error 24 If There Is a Ha rd Disk, DVD, CD-RW or CD -ROM Test Error NOTE Before removing the cover, always switc h off the displa y and PC Work station. Discon nect the po wer co rd and any ac cesso ry cable s.
25 Configuratio n Proble ms If Th ere Is a Ser ial or Parallel P ort Test Error If There Is a Serial or Pa rallel Port Test Error NOTE Before removing the cover, always switc h off the d isplay and PC Workstation. Discon nect the po wer co rd and any ac cesso ry cable s.
Conf iguration Proble ms If You Cannot Tu rn Off You r PC Workstation 26 If You Cannot Turn Off Your PC Workstation If You Have Forgotten Your Password NOTE Use these instructions if the passwords were set with the Setup prog ram . Symptom... Check that.
27 Configuratio n Proble ms If Your PC Works tati on Has an Audi o Problem If Your PC Workstation Has an Audio Problem Symptom... Solution.. . No sound when r unning an y app licat ion s. If you are using Windo ws NT 4.0, check the volume, mut e, and balance se ttings.
Conf iguration Proble ms If Your PC Workstation Has a Software Problem 28 If Your PC Workstation Has a Software Pro blem Symptom... Solution... Green power indicator light is illumin ated, but some softwar e won’t run. • Refer to the application software documentation and/or the operating system documentation for guidance.
29 Configuratio n Proble ms If the PC Wo rkstation Cl ock Is Not Keeping Tim e Correctly If t he PC Wo rkst ation Cloc k Is Not Keeping Tim e Correctly WARNING There is a danger of explos ion if the batt ery i s inco rrectly i nstal led. For your safet y, never attempt to r echarge, d isassemble, or burn the old battery.
Conf iguration Proble ms If You Have Problems Using the Euro Symbol 30 If You Have Problems Using t he Euro Symbol If your keyboard has a Euro symbol key , it can only be used wi th operating sy st ems and appli cations that support this featur e.
31 Configuratio n Proble ms Trou bl esho oting BIO S Prob lems Troubleshooting BIOS Probl ems The BIOS is a set of program routines that gives the PC W orkstation its fundamental oper ational character istics. Many problem s with your PC W orkstation can be solved by updati ng (flashing) the BIOS (Basic Input Output Sy stem).
Conf iguration Proble ms Troublesho oting BIOS Problems 32 Clearing the CMOS 1 Turn off the PC Workstation, disconn ect the power cord and data cables, then remove the cover. 2 Set the system board switch 8 to the ON position to clear the C MOS memor y.
33 Configuratio n Proble ms Trou bl esho oting BIO S Prob lems Recovering the BIOS (Crisis Mode) If for some reason the BIOS is corrupted an d the standard flash cannot be used, use t he BIOS Reco very Mode (excepti onal BIOS r ecovery operation) to restore the BIOS.
Conf iguration Proble ms System Bo ard Swit ches 34 System Board Switches There are ten sy stem board switches used for configura tion, numbered from 1 to 10. A certain number of these are reserv ed (switches 1, 2, 3, 4, 5) and should not be modif ied, other wise it coul d lead to a sy stem failure.
35 Configuratio n Proble ms Using the HP Se tup Program Using the HP Setup Prog ram The Setup program all ows you to vi ew and chan ge the configuration of your PC W orkstation, such as the passwords and boot de vice order . Follow these instructions to check the configur ation.
Conf iguration Proble ms More Tr oublesho oting for Drives 36 More Troubleshooting for Drives This section pr ovides more informati on on how to solve prob lems with your drives or accessory boards.
37 Configuratio n Proble ms Mor e Tr oub les hoot ing for Dri ves If the Hard Disk Activity Light Does Not Work If the hard disk activity light does not fl icker when the PC W orkstation is accessing the har d disk drive: 1 Check that the contro l panel connector is firmly attached to the system board.
Conf iguration Proble ms More Tr oublesho oting for Drives 38 CD-ROM, DVD or CD-RW Door Does No t Open If you have d ifficulty re moving a disk from the drive (du ring a power failure fo r example), you can use the manual eject button.
Troubleshooting with HP DiagTools HP DiagTools is an accurate and reliable utili ty that helps you di agnose any potential hard ware-related pro blems. Wi th this utility you can: • Check the hardware configuration and verify that it is functioning correctly.
Troubleshooting with HP DiagTools 40 If you are running the diagnostics from a CD-ROM, then the foll owing settings must also be checked. ❒ In the Security menu, set all Hardware Pr otection items to “Enabled” or “Unlocked” (if app licable).
41 Troubleshooting with HP DiagTools 4 When DiagTools starts, it will display a welcome scr een. Foll ow the on-screen instructions to carry out the diagnostic tests. The different available tests are descr ibed below. HP DiagTools Hardware Tests The following hardware tests can be performed from HP Di agT o ols: ❒ Hardware Detection .
Troubleshooting with HP DiagTools 42 Producing a Sup port Ticket To produce a comple te record of your system’s configuration and test results, you will need to create a Support Ticket If you are using HP DiagTools f rom the hard disk drive, a fl oppy disk drive is re quired to store the Suppo rt Ticket file.
Recovering Har d Disk Drive Conten ts In the unlike ly event of a hard disk crash, you can r ecover your PC Workstation’s preloade d operating system and software using the PC Image Engineer — Image Creation an d Recovery CD-ROM 1 supplied with your PC Workstation.
Recovering Hard Disk Drive C ontent s 44 Recovering Prelo aded Drivers Y ou can use the Image Creation and Recovery CD-R OM to reinstall drivers that were delivered with the PC W orkstation. T o do this, inser t the CD-ROM into the CD- ROM drive . Automatically an H TML file is displayed.
Other Sources of Inform ation Getting Online Support for Troubleshoot ing HP’ s support web si te provides extensive support mater ial that can help you troublesho ot problems o n your PC W orkstati.
Hewlett-Packar d Support and Information Services Y ou can learn more about HP se rvice and support fr om the suppor t We b s i t e : www.hp.com/go/kayaks upport . Collecting Informati on Before Contacting HP Support It is recomm ended that befor e contacting HP Support you n ote down some of the information mentioned below .
デバイスHP (Hewlett-Packard) XM600の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) XM600をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) XM600の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) XM600の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) XM600で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) XM600を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) XM600の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) XM600に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) XM600デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
