HumaxメーカーIRCI-ACEの使用説明書/サービス説明書
ページ先へ移動 of 42
The product image ma y differ from the actual product. Digital Satellite Receiver IRDET O Embed ded User's Manual IRCI-A CE HUMNO-IRCIACE.300GB/F A/AR.
** Thank you for purchasing a HUMAX Digital Satellite Receiver. Please read this user manual carefully, to be able to safely install, use and maintain the product at maximum performance. Keep this user manual next to your product for future reference.
** The product has been manufactured to satisfy international safety standards. Please read the following safety precautions and warning carefully. ** • Disconnect the product from the mains before you start any maintenance or installation procedures.
** 1. Before Using the Product 1.1 Package Contents 1.2 Front Panel 1.3 Rear Panel 1.4 Conditional Access 1.5 Remote Controller GB5 ** GB5 GB6 GB7 GB8 GB10 2. Setup 2.1 Connecting Antenna/TV 2.2 Connecting Hi-Fi System 2.3 Powering On GB12 ** GB12 GB13 GB14 3.
** 5. Service List 5.1 Switching Services 5.2 Organising Services 5.3 Organising Favourite Services 5.4 Organising Satellites GB25 ** GB25 GB26 GB27 GB28 6. Programme Guide GB29 7. Setting Preferences 7.1 Parental Control 7.2 System Setting GB31 ** GB31 GB31 8.
** This chapter provides detailed instructions on the product and its accessories. 1.1 Package Contents When you unpack your package contents, make sure you have all the necessary items shown in figure below. If any of items is missing or damaged, please contact your product dealer for replacement.
** 1.2 Front Panel ** ** 1. STANDBY Button ** Switches between Operation and Standby modes. ** 2. VOL Button ** Display the volume bar. ** 3. CH-/CH+ or VOL-/VOL+ ** Moves the TV/Radio service or volume up/down. ** 4. TV LED ** Green light is emitted when the product is in TV mode.
** 1.3 Rear Panel ** ** 1. LNB IN ** Connects a satellite antenna cable. ** 2. LNB OUT ** Connect other digital satellite receiver. ** 3. RS-232C ** Connects to your PC to update product’s software programme. ** 4. VIDEO ** Connects to your TV or VCR and output Video signals.
** 1.4 Conditional Access Although some TV and Radio services are free to air, most TV and Radio/Music services are available on a subscription basis and can only be enjoyed via Conditional Access component. The Conditional Access component is removable Smartcard and Common Interface CAM.
** ** Inserting Common Interface CAM ** Your receiver is equipped with slot of Common Interface(CI). ** 1. Open the right-hand flap on the front panel of the product.
** 1.5 Remote Controller 1. SOURCE ** Selects the input source between TV and product. ** 2. TV/RADIO ** Switches between TV and Radio modes. ** 3. NUMERICAL BUTTONS ** Enters a TV/Radio service number or menu option number. ** 4. MENU ** Displays the main menu.
** 9 . C H-/C H+ ** Changes the Service. ** 10. RECALL ** Returns to the previous screen. ** 11. FREEZE ** Freezes the TV screen you are watching. Play the audio continuously. ** 12. WIDE ** Changes the Display Format. ** 13. STANDBY ** Switches between Operation and Standby modes.
** This chapter describes how to set up the product. Select the most appropriate procedure depending on your case. Before you connect the product to any other equipment, you must disconnect all the equipment from their power sources. Note: If you encounter any problem when setting up the product, please contact your local product distributor.
** 2.2 Connecting Hi-Fi System ** ** 1. Connect an Antenna to LNB IN on the product. 2. Connect VIDEO on the product to VIDEO IN on the TV using the RCA cable. 3. Connect AUDIO L/R on the product to AUDIO IN L/R on the Audio System using the RCA cable.
** 2.3 Powering On ** 1. Connect the power cord of the product to a wall outlet. ** ** 2. Press the STANDBY button on the front of the product or on the remote controller.
** 3.1 Selecting Language When powering on your product for the first time after purchasing, the Selecting Language screen is automatically displayed. Select your desired language using the button and press the OK button. The following procedure is HUMAX Auto Search.
** 1. HUMAX Auto Search If your product is connected to the antenna and television, you can automatically search services without entering any other information. Warning: Please note that once you perform HUMAX Auto Search, all data such as Antenna setting information channel lists and smart card information you already set are deleted.
** 2. Antenna Setting You can set antenna and LNB information to search services. ** • Antenna Alternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for SMATV. • Satellite Name: Displays the satellite list ordered by name.
** 3. Manual Search You can search services of the selected satellite by transponders if you know the transponder information. ** • Antenna Alternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for SMATV.
** 4. Satellite Setting This menu appears only when you enable Motorised System in Antenna Setting menu and press the OK button while Antenna Alternative in Manual Search menu is selected. ** • Satellite Name: Select a satellite to identify a motor antenna.
** To initialise satellite position saved at the Motor Antenna, set DiSEqC Command Mode to Installer, set Motor Control to Reset, then press the OK button.
** 6. Automatic Search If you select the satellite to search services according to the Antenna Setting, you can automatically search the service without entering any other information. To enter Automatic Search menu, press the MENU button, then select INSTALLATION-SERVICE SEARCHING-MANUAL SEARCH-AUTOMATIC SEARCH.
** 4.1 Viewing Programme You can change a service into your desired service using the CH-/CH+ , ,o r NUMERICAL button. You can also use the Service List or Programme Guide.
** 4.2 Changing Language If the current programme provides subtitle information, the subtitle icon will appear on the i-plate. You can select the language for the subtitle using the SUBTITLE button.
** 4.4 Setting Property of Service You can add the current service to Favourite group. In addition, you can lock, unlock, skip, or delete the current service while watching a programme. The operation is as follows: 1. Press the OK button while watching a programme.
** There are 5 types of service lists – All, Favourite, Bouquet, Satellite, Alphabet - to find services you are interested in quickly and easily. All service list displays all searched TV or Radio services sorted by service number.
** 5.2 Organising Services You can edit TV or Radio services using the Organise TV Services (MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE TV SERVICES-ORGANISE ALL SERVICES) or Organise Radio Services (MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE RADIO SERVICES-ORGANISE ALL SERVICES).
** 5.3 Organising Favourite Services You can add services to Favourite groups using Organise Favourite TV Services (MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE TV SERVICES-ORGANISE FAVOURITE A~D) or Organise Favourite Radio Services (MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE RADIO SERVICES-ORGANISE FAVOURITE A~D).
** 5.4 Organising Satellites You can turn a satellite on or off and delete a transponder. To enter Organise Satellites menu, go to MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE SATELLITES. The Organise Satellites screen consists of Satellite List on the left side of the screen and Transponder List and Service List on the right side.
** The programme guide provides the programme information for all services, based on date and time. In addition, it provides convenient ways- viewing programmes in Now, Next, Weekly, or Quick mode - to search your desired programme and to watch or reserve it.
** Note: • Press the TV/RADIO button to switch to the Radio Guide. • The reservation icons on the reserved programmes in the guide differ according to the reservation type. Once Reserve a programme once. Daily Reserve a programme everyday. Weekly Reserve a programme once a week.
** This chapter describes the menu which lets you customise your product by your taste. If you are not familiar with navigating menu, see 3.2 Searching Services before setting preferences. 7.1 Parental Control The Parental Control menu (MENU-PARENTAL CONTROL) lets you control the access to programmes by programme rating.
** 3. A/V Output Setting This menu lets you adjust the audio and video output, match the screen ratio to your TV, and select the display format according to the screen ratio, and select the TV standard. 4. UHF Tuning You can select UHF Channels for your TV and adjust fine tuning setting.
** The Status menu (MENU-INSTALLATION-STATUS) provides checking tools like status information of system and signal level of service. If you are not familiar with navigating menu, see 3.
** The product provides various utilities- viewing calendar, checking your biorhythm, and enjoying games. To use utilities, go to MENU-UTILITY. If you are not familiar with navigating menu, see 3.2 Searching Services. ** 1. Calendar You can see the specified monthly calendar.
** In order to maintain proper performance of the product, it is essential to have the most up-to-date software. The latest news and release of software versions may be found at the Humax website - http://www.humaxdigital.com. It is recommended that you periodically check for the availability of software upgrades.
** The product cannot work at all during software update. It may take 5-10 minutes to update software. Updating software is largely divided into two ways, automatic detection and using software update menu (MENU-INSTALLATION-STATUS-STB UPGRADE). New software can be found when powering on the product.
** Before contacting your local service, please read the following instructions. If the product does not work normally after completing the following troubleshooting, please contact your local product distributor or service centre. ** 1. The LED on the front panel does not light.
** 5. Remote controller does not operate - To manipulate the equipment with the remote controller, its emitting part should directly point towards its receiving part of the product. - Check the battery of the remote controller. ** 6. Reservation is unavailable - Check whether it is not overlapped with other reservation.
** MPEG Transport Stream A/V Decoding Aspect Ratio 4:3, 16:9 Video Resolution 720 x 576, 720 x 480 Audio Mode Single /Dual mono/ Stereo /Joint stereo Memory Flash Memory 2 Mbytes Graphics(MPEG) & .
** You can get information such as troubleshooting guide, software upgrades and product support guide from the following web sites and call centre (Hotline). Please try to contact to your local dealers first when you have any problem. ** Homepage http://www.
** Humax Middle East Call Centre (Dubai, UAE) Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday) E-mail: callcenterME@humaxdigital.com Open: Local Time in Dubai (GMT+4) 9:00 - 20:00 (Satur.
デバイスHumax IRCI-ACEの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Humax IRCI-ACEをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHumax IRCI-ACEの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Humax IRCI-ACEの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Humax IRCI-ACEで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Humax IRCI-ACEを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHumax IRCI-ACEの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Humax IRCI-ACEに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHumax IRCI-ACEデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。