Hunter Fanメーカー42826-01の使用説明書/サービス説明書
ページ先へ移動 of 17
T ype 2A Models T ype 2A Models T ype 2A Models Form# 42826-01 20100218 ©2010 Hunter Fan Co. For Y our Records and W arranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No.
2 42826-01 • 02/18/10 • Hunte r Fan Company T ab le Of Contents Preparing the F an Site ................. 3 1 • Getting Ready ...................... 6 2 • Installing the Hanger Brack et .......7 3 • Ass embling and Hanging the Fan . . . 8 4 • Wiring the Fan .
3 42826-01 • 02/18/10 • Hunte r Fan Company 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From W all or Nearest Obstruction St ep 1 - Ch oo se th e F an Site Proper ceiling fan loc ation and at tachment to the building struct ure ar e ess ent ial for safety, r eliable operation, maximum eciency, and e nergy savings .
4 42826-01 • 02/18/10 • Hunte r Fan Company P r e p a r i n g t h e Fa n S i t e ( c o n t i n u e d ) CAUT ION: All wiring must b e in accordance wi th national and local electrical cod es and ANSI/NFP A 70. If you are unfamiliar with wiring, use a qualied electrician.
5 42826-01 • 02/18/10 • Hunte r Fan Company M o u n t i n g a n d O p t i o n a l A c c e s s o r i e s Understan ding Mountin g Hunte r ’ s patent ed mounting syste m provides you maximum eas e in installing your fan. is fan was de signed to be mounted only on at ceilings and can b e use d on ceilings less than 8 feet high.
6 42826-01 • 02/18/10 • Hunte r Fan Company T o install a ceiling fan, be sure you can do the following: • Loc ate the c eiling joist or other suitable suppor t in ceiling. • Drill hole s for and install woo d screws. • Identif y and connect ele ctrical wires.
7 42826-01 • 02/18/10 • Hunte r Fan Company Steps 2-4 – 2-6 CAU TION: T o avoid possible ele ctrical shock , be fore ins talling your f an, disconnect the p ower by t urning o the circuit br eakers t o the outlet box and asso ciated wall switc h loc ation.
8 42826-01 • 02/18/10 • Hunte r Fan Company W ARN ING: Fan may fall if not assembl ed as directed in these installation ins tructions. 3-1. Lift the motor assembly and ho ok the three tabs over the handles, one at a time.
9 42826-01 • 02/18/10 • Hunte r Fan Company Dual Switch Wiring Single Switch Wiring All wiring must b e in accorda nce with national and lo cal ele c trical code s and ANSI/NFP A 70. If you are unfamiliar with wiring , u se a qualifie d elec trician.
10 42826-01 • 02/18/10 • Hunte r Fan Company 5-1. Place the fan housing over the mot or . 5-2. Align the holes in the fan housing with the holes in the ceiling plate. 5-3. Partially install each canopy screw into t he holes in the fan housing and into the ceiling plat e until all holes are aligned.
11 42826-01 • 02/18/10 • Hunte r Fan Company Step 6-1 (Deta il) Grommet Blade Ass embly Screws Use with grommet Use without grommet Hunte r fans us e several styl es of fan blad e irons (brack ets that hold the blade to the fan). 6-1. Y our f an may inc lude blad e grommets.
12 42826-01 • 02/18/10 • Hunte r Fan Company Y our Hunter fan comes with an int egrated light xt ure assembly and an optional swit ch housing cap and plug b utton. i s feat ure gives you the option of installing the fan with OR without t he included light xtur e.
13 42826-01 • 02/18/10 • Hunte r Fan Company Lower Swit ch Housing Plug Connector Housing Ass embly Screw Plug Connector Detail Steps 7-6 – 7-7 7-6. T o attach the lower swit ch housing , connect the upp er plug connector from the motor to t he lower plug connec tor in the lower switc h housing as sembly .
14 42826-01 • 02/18/10 • Hunte r Fan Company 7 • C o m p l e t i n g Y o u r I n s t a l l a t i o n W i t h o r W i t h o u t a B o w l L i g h t F i x t u r e ( C o n t i n u e d ) Installing the Gl ass Bowl 7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets.
15 42826-01 • 02/18/10 • Hunte r Fan Company Uninstalling the Lig ht Fixture 7-14. T o uninstall the light xt ure, rst disconnect the plug connectors bet ween the black wire and the r ed wire. 7-15. Disconnec t the plug connectors b etween the two white wires.
16 42826-01 • 02/18/10 • Hunte r Fan Company In warm weather , us e downward air ow patt ern In cold weather , us e upward air ow pattern 8-1. T urn on elec trical power to the fan. 8-2. e fan pull chain contr ols power to the fan. e pull chain has four settings in se quence: High, Medium, Low and O.
17 42826-01 • 02/18/10 • Hunte r Fan Company Problem: No thing happens; f an do es no t move. 1. T urn power on, replace fuse , or reset break er . 2. Lo osen c anopy , check all connections accor ding to the wiring the fan section. 3. Check the plug conne ction in the switc h housing .
デバイスHunter Fan 42826-01の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Hunter Fan 42826-01をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHunter Fan 42826-01の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hunter Fan 42826-01の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hunter Fan 42826-01で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hunter Fan 42826-01を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHunter Fan 42826-01の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hunter Fan 42826-01に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHunter Fan 42826-01デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
