Husqvarnaメーカー570, 575XPの使用説明書/サービス説明書
ページ先へ移動 of 44
E E E E n n n n g g g g l l l l i i i i s s s s h h h h 570 575XP Oper ator’ s manual (EP A II) Please read the operator’ s man ual carefully and mak e sure you understand the instructions before using the machine.
2 – English KEY T O SYMBOLS Ke y to symbols W ARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine .
English – 3 CONTENTS Contents KEY T O SYMBOLS K ey to symbols ............................................................. 2 CONTENTS Contents ...................................................................... 3 INTRODUCTION Dear customer! ....
4 – English INTR ODUCTION Dear customer! Congratulations on y our choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Huskvarna River , for production of m uskets .
English – 5 WHA T IS WHA T? What is what on the chain sa w? 1 5 3 6 8 7 9 15 16 11 12 13 14 10 25 24 22 21 20 19 18 17 23 4 2 28 26 27 1 Decompression valv e 2 Switch f or heated handle (575XPG) 3 Star ter handle 4 Adjuster screws , carburetor 5 Stop s witch (Ignition on/off s witch.
6 – English GENERAL SAFETY PRECA UTIONS Bef ore using a new c hain saw • Please read this manual carefully . • Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly . • Refuel and star t the chain saw .
English – 7 GENERAL SAFETY PRECA UTIONS chain saw usage if possib le. Y our dealer , forestry school or your libr ar y can provide inf or mation about which training materials and courses are av ailable . W ork is constantly in progress to improv e the design and technology - improv ements that increase your safety and efficiency .
8 – English GENERAL SAFETY PRECA UTIONS • The chain brak e (A) can either be activated man ually (by your left hand) or automatically b y the iner tia release mechanism. • The brak e is applied when the front hand guard (B) is pushed f orwards .
English – 9 GENERAL SAFETY PRECA UTIONS If the kickbac k is less violent or the kickback z one of the bar is closer to you the chain br ake is designed to be activated man ually by the mo vement of your left hand. • In the f elling position the left hand is in a position that makes man ual activation of the chain br ake impossib le.
10 – English GENERAL SAFETY PRECA UTIONS The machine ′ s vibration damping system reduces the transf er of vibration between the engine unit/cutting equipment and the machine ′ s handle unit. The body of the chain saw , including the cutting equipment, is insulated from the handles by vibr ation damping units.
English – 11 GENERAL SAFETY PRECA UTIONS • Keep the chain pr operly tensioned! If the chain is slack it is more likely to jump off and lead to increased w ear on the bar , chain and dr iv e sprock et.
12 – English GENERAL SAFETY PRECA UTIONS Sharpening y our chain and adjusting depth gauge setting General information on sharpening cutting teeth • Ne ver use a b lunt chain. When the chain is blunt you ha ve to e x er t more pressure to f orce the bar through the wood and the chips will be very small.
English – 13 GENERAL SAFETY PRECA UTIONS General advice on adjusting depth gauge setting • When you sharpen the cutting tooth (A) the depth gauge setting (C) will decrease. T o maintain optimal cutting perf ormance the depth gauge (B) has to be filed down to achie ve the recommended depth gauge setting.
14 – English GENERAL SAFETY PRECA UTIONS Lubricating cutting equipment Chain oil Chain oil must demonstrate good adhesion to the chain and also maintain its flow characteristics regardless of whether it is warm summer or cold winter weather . As a chain saw man uf acturer we hav e dev eloped an optimal chain oil which has a vegetab le oil base.
English – 15 GENERAL SAFETY PRECA UTIONS Needle bearing lubrication Both versions of sproc kets hav e a needle bear ing on the drive shaft, which has to be greased regularly (once a week). CA UTION! Use only high quality bear ing grease or engine oil.
16 – English ASSEMBL Y Fitting the bar and chain Check that the chain br ake is in disengaged position b y moving the front hand guard to wards the front handle . Remov e the bar nuts and remove the clutch co v er (chain brak e). T ake off the transportation r ing (A).
English – 17 FUEL HANDLING Fuel Note! The machine is equipped with a two-stroke engine and must alwa ys be run using a mixture of gasoline and two- stroke oil. It is impor tant to accurately measure the amount of oil to be mix ed to ensure that the correct mixture is obtained.
18 – English FUEL HANDLING Fueling Clean the area around the fuel cap . Clean the fuel and chain oil tanks regularly . The fuel filter must be replaced at least once a year . Contamination in the tanks causes malfunction. Make sure the fuel is w ell mix ed by shaking the container bef ore refuelling.
English – 19 ST AR TING AND ST OPPING Star ting and stopping Cold engine Starting: The chain brak e should be activ ated when star ting the chain saw . Activate the chain brak e by pushing the front hand guard f orwards . Ignition; choke: Set the choke control in the chok e position.
20 – English ST AR TING AND ST OPPING CA UTION! Do not pull the star ter cord all the wa y out and do not let go of the star ter handle when the cord is fully e xtended. This can damage the machine. Note! Pull the front hand guard tow ards the front handle.
English – 21 W ORKING TECHNIQUES Bef ore use: 1 Check that the chain br ake w orks correctly and is not damaged. 2 Check that the rear right hand guard is not damaged. 3 Check that the throttle loc k wor ks correctly and is not damaged. 4 Check that the stop s witch works correctly and is not damaged.
22 – English W ORKING TECHNIQUES 5 T ake great care when cutting a tree that is under tension. A tree that is under tension ma y spring back to its normal position bef ore or after being cut. If you position y ourself incorrectly or make the cut in the wrong place the tree ma y hit you or the machine and cause y ou to lose control.
English – 23 W ORKING TECHNIQUES 5 In order to keep control of y our saw , alwa ys maintain a firm foothold. Ne ver w ork on a ladder , in a tree or on any other insecure suppor t. 6 Alwa ys use a fast cutting speed, i.e. full throttle. 7 T ake great care when y ou cut with the top edge of the bar , i.
24 – English W ORKING TECHNIQUES T wo factors decide whether the chain will jam or the object that you are cutting will split: the first is how the object is suppor ted bef ore and after cutting, and the second is whether it is in tension. In most cases you can a void these problems b y cutting in two stages; from the top and from the bottom.
English – 25 W ORKING TECHNIQUES The log is supported at both ends. There is a high risk that the chain will jam. Star t by cutting from abo v e (about 1/3 of the wa y through).
26 – English W ORKING TECHNIQUES Remov e any undergrowth from the base of the tree and chec k the area f or obstacles (stones, branches , holes, etc.) so that you ha ve a clear path of retreat when the tree star ts to f all. Y our path of retreat should be roughly 135 degrees a wa y from the intended f elling direction.
English – 27 W ORKING TECHNIQUES Finish the f elling cut parallel with the directional cut line so that the distance between them is at least 1/10 of the trunk diameter . The uncut section of the trunk is called the f elling hinge. The f elling hinge controls the direction that the tree f alls in.
28 – English W ORKING TECHNIQUES Cutting trees and branches that are in tension Preparations: W ork out which side is in tension and where the point of maximum tension is (i.e. where it would break if it was bent e ven more). Decide which is the saf est wa y to release the tension and whether you are ab le to do it safely .
English – 29 W ORKING TECHNIQUES Limbing Make sure that y ou can stand and move about saf ely . Work on the left side of the trunk. W or k as close as possib le to the chain saw f or maximum control. If possible, let the w eight of the chain saw rest on the trunk.
30 – English MAINTENANCE General The user must only carry out the maintenance and ser vice work described in this manual. More extensiv e work must be carried out by an authorised ser vice workshop .
English – 31 MAINTENANCE High speed jet H At the factory the engine is adjusted at sea level. When working at a high altitude or in diff erent weather conditions, temperatures and atmospheric humidity , it may be necessary to make minor adjustments to the high speed jet.
32 – English MAINTENANCE Checking the inertia brake release With the engine turned off, hold the chain saw o ver a stump or other firm object. Let go of the front handle so that the bar drops tow ards the stump as the chain saw rotates around the rear handle.
English – 33 MAINTENANCE Right hand guard Check that the right hand guard is not damaged and that there are no visible def ects, such as crac ks. Vibration damping system Regularly check the vibration damping units f or cracks or def ormation. Make sure the vibr ation damping units are securely attached to the engine unit and handle unit.
34 – English MAINTENANCE Star ter Changing a broken or w orn star ter cor d • Loosen the screws that hold the starter against the crankcase and remov e the star ter . • Pull out the cord appro x. 30 cm (12 inches) and hook it into the notch in the rim of the pulley .
English – 35 MAINTENANCE Air filter The air filter must be regularly cleaned to remov e dust and dir t in order to av oid: • Carburettor malfunctions • Star ting problems • Loss of engine power • Unnecessar y wear to engine parts • Excessive fuel consumption.
36 – English MAINTENANCE Adjustment of the oil pump The oil pump is adjustable . Adjustments are made by turning the screw using a scre wdr iver or combination spanner .
English – 37 MAINTENANCE Winter use Running problems can occur when using the machine in the cold and snowy conditions caused b y: • T oo low engine temperature. • Icing of the air filter and carburetor . Special measures are theref ore often required: • Preheat the intake air to the carb uretor by using the heat from the cylinder .
38 – English MAINTENANCE Maintenance schedule The f ollowing is a list of the maintenance that must be perf or med on the machine. Most of the items are descr ibed in the Maintenance section. Daily maintenance W eekly maintenance Monthly maintenance Clean the outside of the machine.
English – 39 TECHNICAL D A T A T echnical data 570 575XP Engine Cylinder displacement, cu.in/cm 3 4,1/68 4,5/73,5 Cylinder bore, inch/mm 1,93/49 2,0/51 Stroke , inch/mm 1,42/36 1,42/36 Idle speed, r.
40 – English TECHNICAL D A T A Recommended original and replacement bar and chain combinations F ollowing is a list of recommended cutting equipment f or Husqvarna chain saw models 575XP , 575XPG and 570. These chain saw models equipped with either of the listed bar and sawchain combinations , fulfills the requirements according to ANSI B 175.
English – 41 FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), Environment Canada and Husqv ar na Forest & Garden are pleased to e xplain the emissions control system warranty on your 2001 and later small nonroad engine .
42 – English AMERICAN ST AND ARD SAFETY PRECA UTIONS ´®z+H8)¶5m¨ ´®z+H8)¶5m¨ Safety precautions f or chain saw users (ANSI B 175.1-2000 Anne x C) Kickbac k safety precautions With a basic understanding of kickbac k, you can reduce or eliminate the element of sur prise.
.
´®z+H8)¶5m¨ 2004-08-17 ´®z+H8)¶5m¨ 1140240-95.
デバイスHusqvarna 570, 575XPの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Husqvarna 570, 575XPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHusqvarna 570, 575XPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Husqvarna 570, 575XPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Husqvarna 570, 575XPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Husqvarna 570, 575XPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHusqvarna 570, 575XPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Husqvarna 570, 575XPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHusqvarna 570, 575XPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
