Husqvarnaメーカー9027STEの使用説明書/サービス説明書
ページ先へ移動 of 32
9027STE XP Owner's Manual.
2 Safe Operation Practices f or Snow Thro wers IMPORT ANT : This machine is capable of amputating hands and f eet and throwing objects. F ailure to obser v e the follo wing saf ety instructions could result in ser ious injur y or death. SAFETY R ULES W ARNING: This snow thrower is for use on sidewalks, driveways and other ground le vel surfaces.
3 PR ODUCT SPECIFICA TIONS Gasoline Capacity 4.0 Quar ts and T ype: Unleaded Regular only Oil T ype SAE 30 (abov e 40°F) (API SG–SL): SAE 5W-30 or 10W -30 (0° to +40°F) SAE 0W -30 (below 0°F) Oil Capacity: 26 Ounces Spark Plug: Champion RN4C (Gap: .
4 P AR TS P A CKED SEP ARA TEL Y IN CAR T ON MAINTENANCE ..................................................... 14-15 MAINTENANCE SCHEDULE ..................................... 14 SER VICE AND AD JUST MENTS ........................... 16-18 ST ORA GE .
5 ASSEMBL Y / PRE-OPERA TION Read these instructions and this man u al in its entirety before y ou attempt to assemble or oper ate your ne w snow throw er . Y our new sno w thrower has been as sem bled at the f actor y with the ex cep tion of those par ts left unassembled f or shipping pur poses.
6 ASSEMBL Y / PRE-OPERA TION INST ALL DISCHARGE CHUTE / CHUTE RO T A TER HEAD (See Fig. 7) NO TE: The multi-wrench provided in y our par ts bag may be used to install the chute rotater head. 1. Place discharge chute assembly on top of chute base with discharge opening tow ard front of snow throw er .
7 ASSEMBL Y / PRE-OPERA TION INST ALL CHUTE DEFLECTOR REMO TE CONTROL (See Figs. 8 and 9) 1. Install remote cable br ack et to discharge chute with 5/16-18 carriage bolt, 5/16 fl at w asher and 5/16-18 lockn ut as shown.
8 OPERA TION KNO W Y OUR SNO W THR O WER READ THIS OWNER'S MANU AL AND ALL SAFETY RULES BEFORE OPERA TING Y OUR SNO W THRO WER. Compare the illustrations with y our snow throw er to familiarize y ourself with the location of various controls and adjustments.
9 MEETS A.N.S.I. SAFETY REQUIREMENTS Our snow thro wers conf or m to the standards of the American National Standards Institute. FIG. 11 OPERA TION LH and RH turn triggers - used to steer the sno w thrower . Drive speed control le ver - used to select f orward or re verse motion and speed of sno w thrower .
10 The operation of any sno w throw er can result in f oreign objects thrown into the e yes, which can result in se vere e ye damage . Alwa ys wear saf ety glasses or ey e shields while operating your sno w thrower or perf or ming any ad just - ments or repairs.
11 OPERA TION T O MO VE FOR W ARD AND BA CKW ARD (See Fig. 18) SELF-PROPELLING, f orward and re verse mo vement of the snow thro wer , is controlled by the traction drive control le ver located on the left side handle . • Squeeze traction drive control le ver to handle to en gage the drive system.
12 ENGINE OIL FILL CAP / DIPSTICK FUEL SHUT - OFF V AL VE PRIM ER SAFETY IG NI TION KEY THRO T TLE CHOKE CONTROL ST ARTER B UTT ON RECOIL ST ARTER HANDLE GAS O LINE FILLER CAP NO TE: ALL ITEMS ARE SHO WN IN THEIR TYPICAL LOCA TION. A CTU AL LOCA TION MA Y V ARY WITH ENGINE ON Y OUR UNIT .
13 COLD ST ART - ELECTRIC ST ARTER 1. Inser t saf ety ignition ke y into the ignition slot until it clicks . DO NO T tur n the ke y . K eep the extra saf ety ignition ke y in a saf e place. 2. Place throttle control in F AST position. 3. Rotate choke control to FULL position.
14 MAINTENANCE LUBRICA TION CHART GENERAL REC OM MEN DA TIONS The warranty on this sno w throw er does not cov er items that hav e been sub ject ed to operator abuse or negligence. T o receive full v alue from the warranty , operator must maintain snow thro wer as in str uct ed in this manual.
15 MAINTENANCE V- B E LT S Check V -belts f or deter ioration and wear after e very 50 hours of operation and replace if necessary . The belts are not ad just able . Replace belts if they begin to slip from wear . (See “T O REMO VE BEL T COVER” in the Ser vice and Adjustments section of this manual).
16 SER VICE AND ADJUSTMENTS W ARNING: T o av oid serious injur y , before perf orming any service or ad- just ments: 1. Be sure throttle is in ST OP position. 2. Remove safety ignition ke y . 3. Make sure the augers and all mov ing parts have completely stopped.
17 SER VICE AND ADJUSTMENTS T O REPLA CE BEL TS (See Fig. 24) The auger and traction drive belts are not adjustab le. If the belts are damaged or begin to slip from wear , they should be replaced. It is recommended that the belt(s) be replaced by a qualifi ed service center .
18 ST ORA GE Immediately prepare your sno w thrower f or storage at the end of the season or if the unit will not be used for 30 da ys or more. W ARNING: Never store the sno w thro wer with gaso line .
19 Does not start 1. Fuel shut-off v alve (if so 1. T ur n fuel shut-off valv e to OPEN position. equipped) in OFF position. 2. Saf ety ignition ke y 2. Insert safety ignition k ey . is not inserted. 3. Out of fuel. 3. Fill fuel tank. 4. Throttle in ST OP position.
20 REP AIR P ARTS A UGER HOUSING / IMPELLER ASSEMBL Y SNO W THRO WER - MODEL NO . 9027STE XP (HU9027STC), PR ODUCT NO . 954 22 30-77 22 18 21 53 19 1 3 2 28 19 55 28 19 55 54 54 6 6 5 6 6 9 12 7 7 8 6.
21 KEY P ART NO . NO . DESCRIPTION 1 532 18 87-03 Bar , Weight 2 532 16 67-85 Nut, Hex 5/16-18 3 872 11 05-10 Bolt, Carr iage 5/16-18 x 1-1/4 4 532 19 10-79 Pulley , Impeller 5 532 18 89-09 Bearing As.
22 REP AIR P ARTS CONTR OL P ANEL / DISCHARGE CHUTE SNO W THRO WER - MODEL NO . 9027STE XP (HU9027STC), PR ODUCT NO . 954 22 30-77 3 2 1 1 2 6 19 2 2 14 26 28 27 27 25 20 29 31 30 16 18 17 10 14 3 13 .
23 REP AIR P ARTS CONTR OL P ANEL / DISCHARGE CHUTE SNO W THRO WER - MODEL NO . 9027STE XP (HU9027STC), PR ODUCT NO . 954 22 30-77 KEY P ART NO . NO . DESCRIPTION 1 532 18 33-34 Knob , Lev er 2 817 50.
24 REP AIR P ARTS HANDLES SNO W THRO WER - MODEL NO . 9027STE XP (HU9027STC), PR ODUCT NO . 954 22 30-77 5 11 12 15 7 10 33 18 19 37 34 35 20 20 21 21 6 11 5 36 13 2 5 15 11 4 4 3 3 16 17 16 23 22 38 .
25 KEY P ART NO . NO . DESCRIPTION 1 532 18 41-10 Lev er , Auger Control, RH 2 532 18 41-09 Lev er , T raction Drive Control, LH 3 532 17 94-39 Nut, Cage 1/4-20 4 532 17 88-88 Bushing, Flange 5 532 16.
26 REP AIR P ARTS DRIVE SNO W THRO WER - MODEL NO . 9027STE XP (HU9027STC), PR ODUCT NO . 954 22 30-77 35 33 15 41 22 34 29 22 31 26 7 2 43 2 11 3 3 25 24 23 12 32 27 44 20 21 21 22 16 17 42 15 2 1 4 .
27 KEY P ART NO . NO . DESCRIPTION 1 532 14 63-15 Screw , He x Head 5/16-18 x 3/4 2 873 80 05-00 Nut, Lock 5/16-18 3 532 15 54-15 W asher , Flat 4 817 49 05-08 Screw , He x Head 5/16-18 x 1/2 5 532 18.
28 REP AIR P ARTS CHASSIS / ENGINE / PULL YS SNO W THRO WER - MODEL NO . 9027STE XP (HU9027STC), PR ODUCT NO . 954 22 30-77 6 19 17 10 21 22 23 2 1 3 4 6 7 8 9 12 13 15 27 26 25 24 18 7 6 20 14 30 29 .
29 REP AIR P ARTS CHASSIS / ENGINE / PULL YS SNO W THRO WER - MODEL NO . 9027STE XP (HU9027STC), PR ODUCT NO . 954 22 30-77 KEY P ART NO . NO. DESCRIPTION 1 532 18 10-44 Spring, T raction Idler 2 532 .
30 REP AIR P ARTS WHEELS / DECALS SNO W THRO WER - MODEL NO . 9027STE XP (HU9027STC), PR ODUCT NO . 954 22 30-77 10 32 30 15 18 17 19 10 12 31 2 7 4 3 4 13 20 11 21 33 22 23 24 10 10 25 26 28 27 29 28.
31 REP AIR P ARTS WHEELS / DECALS SNO W THRO WER - MODEL NO . 9027STE XP (HU9027STC), PR ODUCT NO . 954 22 30-77 KEY P ART NO . NO . DESCRIPTION 1 532 18 78-32 Wheel Assembly , 16", P ower Steeri.
532 19 12-78 Re v . 2 07.30.04 BY Printed in U.S .A. S E C T I ON 1: L I MIT E D W A R R A N T Y Husqvarna F orest & Garden Company (“Husqvarna”) warrants Husqv arna product to the original pu.
デバイスHusqvarna 9027STEの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Husqvarna 9027STEをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHusqvarna 9027STEの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Husqvarna 9027STEの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Husqvarna 9027STEで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Husqvarna 9027STEを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHusqvarna 9027STEの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Husqvarna 9027STEに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHusqvarna 9027STEデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。