HusqvarnaメーカーM-ZT 52 /966793002の使用説明書/サービス説明書
ページ先へ移動 of 20
Operator and Parts Manual Collection System M-ZT 52 /966793002 M-ZT 61 /966793003.
©2013 HTC. All Rights Reserved. Swainsboro, GA. Printed in U.S.A. CONGRA TULA TIONS on the purchase of a new collection system. It has been designed, engineered and manufactured to give you the best possible dependability and perfor mance.
CONTENTS TOOLS REQUIRED 7 / 16 " Wr ench or ratchet and socket 9 / 16 " Wr ench or ratchet and socket ½" Wr ench or ratchet and socket ¾" Wr ench or ratchet and socket 7 / 8 &quo.
4 SAFE OPERA TION PRACTICES FOR RIDE-ON MOWERS SAFETY RULES GENERAL OPERA TION • Read, understand and follow all instructions in the manual and on the machine before starting. • Only allow responsible adults, who ar e familiar with the instructions, to operate the machine.
5 ASSEMBL Y 1. Remove the discharge chute from the deck by removing the side har dware from the chute bracket. Retain the hardwar e for reuse if the collection system is removed. 2. Lower deck to the lowest cutting position. 3. Remove the right hand (discharge side) belt cover from the deck.
6 ASSEMBL Y 1. Make sure the tension r elease lever is forward (disengaged). 2. Place the belt over the pulley on the deck. Refer to illustration for proper r outing. 3. Move the tension release arm to the rear and engage in the latch. 4 DRIVE BEL T Idler Pulleys Belt T wist Outer Pulley 1.
7 ASSEMBL Y 6 BAGGER MOUNT 1. Using 1¾" round head shoulder bolts and nuts, attach the mount hitch to the mount tube as illustrated. Make sure the elbowed arm of the tube is on the right side, with the mount hitch installed to the front. 2. Attach the support bracket to the tube assembly with two 1¾" round head shoulder bolts and nuts.
8 ASSEMBL Y 1. Position upper chute support against bagger inlet, flush at outer edges. See Illustration. 2. Using support as a template, drill two 3 / 8 holes into bagger hood. Upper Chute Support Flex T rim 3. Secure upper chute support to hood with hex bolts, washers and nyloc nuts.
9 ASSEMBL Y 1. Slide upper chute onto middle chute, lining up the middle chute latch and the acorn nut on the upper chute. 2. Stretch bungee latch up onto acorn nut to secure. 10 UPPER CHUTE ASSEMBL Y 11 CHUTE / HOOD INST ALLA TION Push upper chute through the gasketed opening in the cover assembly .
10 ASSEMBL Y 1. Remove the foot plate knob and foot plate. Set aside for later reuse. 2. Remove and reserve the thr ee rubber grommets from the foot r est. 3. Remove the foot rest for r eplacement. Retain hardwar e for reuse. 12 WEIGHT ASSEMBL Y Foot Plate Foot Rest 4.
11 OPERA TION TIPS FOR IMPROVED BAGGING • Follow the mower operation instructions in you mower operator manual. • When operating the grass catcher on a lawn where grass and leaf bagging equipment has not been used, thatch and debris that has accumulated for long periods of time is picked up.
12 BLOWER ASSEMBL Y REP AIR P ARTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 19 20 21 22 23 24 25 26 27 28 29 30 31 32 44 34 35 59 37 38 16 46 41 42 43 45 47 48 50 50 40 53 54 55 56 65 58 51 56 63 64 65 .
13 NOTE: ALL F ASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIFIED. ITEM P ART NO. QTY . DESCRIPTION ITEM P ART NO. QTY . DESCRIPTION REP AIR P ARTS ITEM P ART NO. QTY . DESCRIPTION ITEM P ART NO. QTY . DESCRIPTION 1.. 539 130344 .... 1 .... HOUSING w/DECALS 2.
14 CHUTES REP AIR P ARTS 1 2 3 4 5 6 7 8 9 10 11 12 5 9 11 8 11.
15 NOTE: ALL F ASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIFIED. ITEM P ART NO. QTY . DESCRIPTION ITEM P ART NO. QTY . DESCRIPTION REP AIR P ARTS 1.. 539 108141 .... 1 .... CHUTE, UPPER 2.. 539 130294 .... 1 .... CHUTE, MIDDLE 3.. 539 130933 .... 1 ...
16 BAGGER REP AIR P ARTS 1 2 3 4 5 6 7 8 9 10 11 12 16 15 13 14 15 16 17.
17 NOTE: ALL F ASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIFIED. ITEM P ART NO. QTY . DESCRIPTION ITEM P ART NO. QTY . DESCRIPTION REP AIR P ARTS 1.. 532 195373 .... 1 .... COVER 2.. 532 400226 .... 3 .... CONT AINER, SOFT BAG 3.. 532 130895 .... 2 ...
18 MOUNT , GUARD, BEL T REP AIR P ARTS 1 2 3 4 5 6 7 8 9 10 11 12 13 15 14 19 16 17 18 21 20 25 17 25 25 26 24 27 28 22 23 22.
19 NOTE: ALL F ASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIFIED. ITEM P ART NO. QTY . DESCRIPTION ITEM P ART NO. QTY . DESCRIPTION REP AIR P ARTS 1.. 539 130307 .... 1 .... SHIELD, BEL T , 52" 539 130308 ...1 .... SHIELD, BEL T , 61" 2.. 539 130320 .
115 584027 Rev A 2013-02-15.
デバイスHusqvarna M-ZT 52 /966793002の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Husqvarna M-ZT 52 /966793002をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHusqvarna M-ZT 52 /966793002の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Husqvarna M-ZT 52 /966793002の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Husqvarna M-ZT 52 /966793002で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Husqvarna M-ZT 52 /966793002を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHusqvarna M-ZT 52 /966793002の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Husqvarna M-ZT 52 /966793002に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHusqvarna M-ZT 52 /966793002デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
