HusqvarnaメーカーMZ6128/966613103の使用説明書/サービス説明書
ページ先へ移動 of 64
Operator Manual Please read the operator’ s manual car efully and mak e sur e you understand the instructions befor e using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of an y gasoline exceeding 10% ethanol (E10) will v oid the product war ranty .
©2012 All rights reserved. Orangeburg,SC. Printed in U.S.A. T o implement improvements, specifications and designs can be altered without prior notification. Note that no legal demands can be placed based on the information contained in these instructions.
CONTENTS INTRODUCTION ...................................................... 5 Driving and T ransport on Public Roads ............. 5 T owing ................................................................ 5 Operating ................................
W ARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower .
5 INTRODUCTION Congratulations Thank you for purchasing a Husqvarna ride-on mower . This machine is built for superior efficiency to rapidly mow primarily large areas. A contr ol panel that is easily accessible to the operator and a hydrostatic transmission regulated by steering contr ols both contribute to the machine’s perfor mance.
6 INTRODUCTION Good Service Husqvarna's products are sold only in specialized retail stor es with complete service. This ensures that you as a customer receive only the best support and service. Before the pr oduct is delivered, the machine has, for example, been inspected and adjusted by your retailer .
R N SYMBOLS AND DECALS 7 These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. Used in this publication to notify the reader of a risk of personal injury or death , particularly if the reader should neglect to follow instructions given in the manual.
SYMBOLS AND DECALS 8 Read Operator’s Manual Shut off engine and remove key befor e perfor ming any maintenance or repair work Keep a safe distance from the machine Use on slopes no greater than 10°.
SAFETY 9 Safety Instructions These instructions are for your safety . Read them carefully . General Operation • Read, understand, and follow all instructions on the machine and in the manual before starting. • It is recommended that someone be awar e that you are mowing and can pr ovide help in case of injury or accident.
SAFETY 10 8011-520 Ne ver tak e passengers W ARNING! Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer , birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is an odorless, colorless, poisonous gas.
SAFETY 11 8011-670 P ersonal protective equipment 6003-004 Mow up and do wn, not side to side W ARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen.
SAFETY 12 8011-517 Ne ver allo w children to operate the machine 8011-518 K eep children awa y from work area • Do not try to stabilize the machine by putting a foot on the ground. • Do not mow near drop-of fs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.
SAFETY 13 Safe Handling of Gasoline 8011-516 Ne ver fill the fuel tank indoors W ARNING! The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed. W ARNING! The engine and the exhaust system become very hot during operation.
SAFETY 14 8011-515 Ne ver driv e the machine in an enclosed space General Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. • Never tamper with safety devices.
SAFETY 15 Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury . Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery .
SAFETY 16 IMPORT ANT INFORMA TION The parking brake is not sufficient to lock the machine in place during transport. Ensure that the machine is well fastened to the transport vehicle. Always reverse the machine onto the transport vehicle to avoid tipping it over .
CONTROLS 17 This operator’s manual describes the Husqvarna Zero T urn Rider . The rider is fitted with a Briggs & Stratton four -stroke overhead valve engine. T ransmission from the engine is made via belt-driven hydraulic pumps. Using the left and right steering controls, the flow is r egulated and thereby the direction and speed.
CONTROLS 18 Motion Control Levers The machine’s speed and direction ar e continuously variable using the two steering controls. The steering controls can be moved forwar d or backward about a neutral position. Further mor e, there is a neutral position, which is locked if the steering controls ar e moved outward.
CONTROLS 19 Hour Meter The hour meter displays the total operating time with the blade activated. The display on the hour meter will turn on the oil can icon after every fifty hours of use and will stay on for two hours or until the meter is manually reset.
CONTROLS 20 Blade Switch T o engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully . Ignition Switch The ignition switch is placed on the control panel and is used to start and stop the engine.
CONTROLS 21 8058-161 Ignition s witch - R UN position Release the key to the RUN position when the engine has started. On models equipped with headlights, turn the key clockwise to ACCESSOR Y for headlight use. Fuses Fuses are located on the left hand side of the machine.
1 2 CONTROLS 22 Cutting Height Adjuster The desired cutting height is set with the height pin. The cutting height pedal releases the deck lift to place the deck and the selected height. For transport, push the lift pedal fully forward until the deck lift latches in the transport (highest) position.
CONTROLS 23 IMPORT ANT INFORMA TION Experience indicates that alcohol blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.
OPERA TION 24 Read the Safety Instructions section and the following pages if you are unfamiliar with the machine. T raining Due to unique steering capabilities, zero turn mowers are far mor e maneuverable than typical riding mowers. This section should be reviewed in its entir ety prior to attempting to move the mower under its own power .
OPERA TION 25 8058-223 Cutting height selection Before Starting 1. Read the sections on Saf ety and Controls before starting the machine. 2. Perfor m the daily maintenance befor e starting (see Maintenance Schedule in the Maintenance section). 3. Check that there is sufficient fuel in the fuel tank.
OPERA TION 26 Starting the Engine 1. Sit on the seat. 2. Raise the mower deck to the transport position by locking the lift pedal fully forward. 3. Activate the parking brake.
OPERA TION 27 6. Move the throttle to the middle position. If the engine is cold, the choke control should be pulled up. 5. Move the steering controls outwar d to the locked (outer) neutral position.
OPERA TION 28 8. Press in and turn the ignition key to the start position. 8058-216 Set the throttle 8050-780 T urn to the star t position 8050-781 Return to r un position 9. When the engine starts, immediately release the ignition key back to the run position.
OPERA TION 29 W ARNING! Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. Weak Battery If the battery is too weak to star t the engine, it should be recharged.
OPERA TION 30 Running 1. Release the parking brake by moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.
OPERA TION 31 Operating on Hills Read the Safety Instructions Driving on Slopes in the Saf ety Instructions . IMPORT ANT INFORMA TION Control levers return to neutral when released. This may cause the mower to suddenly stop. W ARNING! Do not drive up or down hills with slopes greater than 10 degrees.
OPERA TION 32 Stopping the Engine 1. Move the throttle to the minimum position (tortoise symbol). 2. Move the steering controls outwar d. 3. Disengage the mower deck by depressing the blade switch. 4. Raise the mower deck by pressing the foot pedal forward to the transport position.
OPERA TION 33 8011-603b Mowing pattern Mowing Tips • Observe and flag rocks and other fixed objects to avoid collisions. • Begin with a high cutting height and reduce it until the desired mowing r esult is attained. The average lawn should be cut to 2½" (64 mm) during the cool season and over 3" (76 mm) during the hot months.
1 2 OPERA TION 34 W ARNING! No adjustments or maintenance should be carried out unless: • the engine stopped • the ignition key removed • the parking brake activated Moving Machine By Hand 8058-059 1.
MAINTENANCE 35 1) First change after 8-10 hours. When operating with a heavy load or at high ambient temperatures, r eplace every 50 hours. 2) In dusty conditions, cleaning and replacement ar e requir ed more often. 3) Perfor med by authorized service workshop.
MAINTENANCE 36 W ARNING! Before performing any service or adjustment checklist: • Engage the parking brake. • Place the Blade-switch in the disengaged position. • T urn the ignition switch to OFF position and remove the key . • Make sure the blades and all moving parts have completely stopped.
1 2 2 MAINTENANCE 37 Battery Y our mower is equipped with a maintenance free battery and does not need servicing. However , periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and ter minals clean.
MAINTENANCE 38 Safety System This machine is equipped with a safety system that prevents starting or driving under the following conditions. The engine can only be started when: • The mower deck is disengaged. • The steering controls ar e in the outer , locked neutral position.
MAINTENANCE 39 8058-063 Slack ening the belt tensioner 8050-843 Belt routing, deck belt Deck Belt Deck Belt Removal Park on a level surface. Apply park brake.
1 2 3 MAINTENANCE 40 Pump Belt The belts are not adjustable. Replace belts if they begin to slip from wear . Replacing Pump Belt Park the mower on a level surface. Engage the parking brake. Belt Removal From the top side of the deck: 1. Remove the deck belt (see Deck Belt Remo val in this section of the manual).
2 3 1 MAINTENANCE 41 IMPORT ANT INFORMA TION The sharpening of blades should be carried out by an authorized service workshop. Cutting Blades T o attain the best mowing ef fect, it is impor tant that blades are well sharpened and not damaged. Replace blades that have been bent or cracked when hitting obstacles.
3 2 1 4 MAINTENANCE 42 Adjusting the Mower Deck Check the tire pr essure before adjustment of the mower deck. See Tire Pressures in Maintenance section. Faulty mower deck adjustments will cause an uneven mowing result. Leveling deck Adjust the deck while the mower is on a level surface.
MAINTENANCE 43 Anti-scalp rollers Anti-scalp rollers ar e properly adjusted when they are just slightly off of the gr ound when the deck is at the desired cutting height in the operating position. Anti- scalp rollers then keep the deck in the pr oper position to help prevent scalping in most terrain conditions.
MAINTENANCE 44 8058-014 Caster wheel Use protective glasses when cleaning and washing. Caster Wheels Check every 200 hours. Check that wheels rotate freely . Removal and Installation Remove nut and caster bolt. Pull the wheel out of the fork. T o r eInstall, reverse the order .
LUBRICA TION 45 12/12 Every year 1/52 Every Week 1/365 Every day Lubricate with grease gun Oil change Level check Filter change 8058-056 Lubrication Schedule General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be filled with engine oil.
LUBRICA TION 46 Wheel and Deck Zerks Use only good quality bearing grease. Grease fr om well-known brand names (petrochemical companies, etc.) usually maintains a good quality . Front Wheel Mount Lubricate with a grease gun until the gr ease is forced out.
2 1 3 LUBRICA TION 47 Drain old oil filters of all free-flowing oil prior to disposal. Place used oil in appropriate containers and dispose of it in accordance with laws in your area. T ransaxle (T ransmission) Fluid Change This transaxle is designed with an external filter for ease of maintenance.
48 TROUBLESHOOTING GUIDE Problem Cause Engine will not start • Blade switch is engaged • Steering controls ar e not locked in the neutral position • Parking brake is not activated • Battery is.
49 TROUBLESHOOTING GUIDE Problem Cause Machine vibrates • Blades are loose • Blades are incorr ectly balanced • Engine is loose Engine overheats • Clogged air intake or cooling fins • Engin.
50 ST ORAGE Winter Storage The machine should be readied for storage at the end of the mowing season or if it will not be in use for longer than 30 days. Fuel allowed to stand for long periods of time (30 days or more) can leave sticky r esidues that can plug the carburetor and disrupt engine function.
51 WIRING DIAGRAM.
52 TECHNICAL DA T A Hex Head Cap Screws The torque values shown should be used as a general guideline when specific tor que values are not given. U.S. Standard Hardware Grade SAE Grade 5 SAE Grade 8 Flangelock Screw w/Flangelock Nut Size ft./lbs Nm ft.
53 TECHNICAL DA T A 1) See the Engine Manuf acturer's manual f or engine specifications. 2) The power r ating of the engines indicated is the av erage net power output (at specified r pm) of a typical production engine f or the engine model measured to SAE standard J1349/ISO1585.
54 CONFORMITY CERTIFICA TES USA requirements Labels are placed on the engine and/or in the engine compartment stating that the machine will fulfill the requir ements. This is also applicable to special requir ements for any of the states, (Califor nia emission rules etc.
55 SER VICE JOURNAL Date, mtr reading, stamp, sign Action Delivery Service Charge the battery . Adjust the tire pr essure of all wheels to 15 PSI (1 bar). Mount the steering controls in the normal position. Connect the contact box to the cable for the seat’s safety switch.
56 SER VICE JOURNAL Action Date, mtr reading, stamp, sign After 10 hours Change the engine oil. Check hydraulic oil level. Inspect hydraulic hoses. Inspect hydraulic belt Inspect hydraulic filter . Check neutral position. Check safety system. Check seat belt.
57 SER VICE JOURNAL Date, mtr reading, stamp, sign Action Daily Service Clean debris from mower . Check engine oil level. Check the tire pr essures. Check underside of deck. Inspect deck pulleys. Check/clean the engine’s cooling air intake. Check safety system.
58 SER VICE JOURNAL Action Date, mtr reading, stamp, sign 25-Hour Service Check the fuel pump’s air filter . Sharpen/Replace mower blades if requir ed. Check the tire pr essures. Check battery with cables. Lubricate according to lubrication chart. Check/clean the engine’s cooling air intake.
59 SER VICE JOURNAL Date, mtr reading, stamp, sign Action 100-Hour Service Grease fittings (caster pivots and caster wheels) Inspect dampeners Inspect frame Inspect throttle cable Inspect hardwar e C.
60 SER VICE JOURNAL Action Date, mtr reading, stamp, sign 300-Hour Service Grease fittings (caster pivots and caster wheels) Inspect dampeners Inspect frame Inspect throttle cable Inspect hardwar e C.
61 SER VICE JOURNAL Date, mtr reading, stamp, sign Action At least once each year Clean the engine’s cooling air intake. Replace the air cleaner’s pre-filter (foam).
62 SER VICE JOURNAL Action Date, mtr reading, stamp, sign.
.
1 15 523327 Rev A 2012-09-15 www .husqvarna.com.
デバイスHusqvarna MZ6128/966613103の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Husqvarna MZ6128/966613103をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHusqvarna MZ6128/966613103の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Husqvarna MZ6128/966613103の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Husqvarna MZ6128/966613103で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Husqvarna MZ6128/966613103を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHusqvarna MZ6128/966613103の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Husqvarna MZ6128/966613103に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHusqvarna MZ6128/966613103デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
