ImpexメーカーMARCY MP-4500の使用説明書/サービス説明書
ページ先へ移動 of 37
MARCY ® PLATINUM CORNER GYM MP-4500 IMPEX ® INC. 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746 Tel: (800) 999-8899 Fax: (626) 961-9966 www. im pe x-f it n e ss .
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDW ARE PACK……….....….
IMPORTA NT SA FETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain pr ecautions apply whenev er you operate a pi ece of exercise eq uipment. Be sure to r ead the entire manual before y ou assemble or operate y our machine.
WA RNING LA BEL REPLA CEMENT The w arning lab els show n here have b een placed on t he Left Base Frame and Left Upper F rame. If the labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacements. Apply the labels in location shown.
HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 4.
HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 5.
HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 6.
A SSEMBLY INSTRUCTI ON Tools Required A ssembling the Machine: Two Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended tw o or people assembling this machine to avoid possible injury . STEP 1 (See Diagram 1) A.) Place the Rig ht Base Frame (#31) on a flat sur face.
DIAGRAM 1 8.
STEP 2 (See Diagram 2) A.) Attach the Rig ht Upper Fr ame (#1) onto the Ri ght Verti cal Frame ( #4). Secure it w ith tw o M10 x 2 ¾” Car riag e Bolts (#98), one 4 ¾ ” x 2 ¾” Bracket ( #25), tw o Ø ¾” W ashers (#100), and tw o M10 Aircraft Nuts (#102) .
STEP 3 (See Diagram 3) A.) Attach the Front Pr ess Base (#2) to the Rig ht Upper Fr ame (#1). Secure i t with one 6 ¾ ” Front Press Base Ax le (#29), tw o Ø 1 ¼” x Ø 3/8” W ashers (#70), and tw o M10 Air craft Nuts (#102). D o not over ti ghten the Nuts; make sure the Base i s able to sw ivel .
DIAGRAM 3 11.
STEP 4 (See Diagram 4) A.) Attach the Seat Pad (#42) to the Seat Post (#6). Secure i t wi th two M8 x 1 5/8” Al len Bolts (#85) and Ø 5/8” W ashers (#101). B.) Insert the Seat Post i nto the opening on the Ri ght Seat Support ( #7). Secure it w ith a Lock Knob (#73) to lock the Seat Post at desir ed height.
STEP 5 (See Diagram 5) A.) Attach the Right Butter fly (#10) onto the axl e on the Butterfly Base (#13) . B.) Insert the Butterfly Handle (#9) into the piv ot on the Rig ht Butterfly. Secure i t wi th one M10 x ¾” All en Bolt (#95) and Ø 1 ¼” x Ø 3/8” W asher (#70) from the bottom.
STEP 6 (See Diagram 6) A.) Do not tig hten all Nuts and Bol ts in this Step until instructed to do so. B.) Attach the Left Vertical Fr ame (#33) onto the Left Base Frame (#32) . Secure it w ith tw o M10 x 2 ¾” Carri age Bolts ( #98), one 4 ¾” x 2 ¾” Bracket (#25) , two Ø ¾ ” W ashers (#100), and two M 10 Aircraft Nuts (#102) .
STEP 7 (See Diagram 7) A.) Attach the Left Upper Frame ( #34) onto the Left Vertical Fr ame (33). Secur e it w ith two M 10 x 2 ¾” Carri age Bolts ( #98), one 4 ¾” x 2 ¾” Bracket (#25) , two Ø ¾ ” W ashers (#100), and two M10 Ai rcraft Nuts (#102) .
STEP 8 (See Diagram 8) A.) Attach the Left Seat Support (#35) onto the Left Base Frame ( #32). Secure it w ith one M 10 x 3 ½” Carri age Bolt ( #99), Ø ¾” W asher (#100), and M 10 Aircr aft Nut (#102). B.) Attach the Left Seat Support to the Left Vertical Fr ame (#33).
STEP 9 (See Diagram 9) A.) Attach the Leg Pr ess Frame (#36) to the br acket on the Left Base Frame (#32). Secure i t wi th an Axle ( #15), tw o M10 x ¾ ” Allen Bol ts (#95), and tw o Ø ¾” W ashers (#100). B.) Insert the Leg Press Adjustment Frame ( #40) into the Leg Pr ess Frame.
STEP 10 (See Diagram 10 & Front Press Cable Loop Diagram) A.) Attach one end of the 140” Front Press C able (#48) to the br acket underneath the Rig ht Upper Frame ( #1). Secure it w ith one M 10 x 1” Al len Bolt (#94) , two Ø ¾ ” W ashers (#100), and one M10 Ai rcraft Nut ( #102).
DIAGRAM 10 19.
Front Press Cable Loop Diagram 20.
STEP 11 (See Diagram 11 & Low er Cable Loop Diagram) A.) Attach the 157” Low er C able (#46) to the l ower opening on the Leg Devel oper (#8) . Attach a Pulley (#67) to the opening . Secure it w ith one M 10 x 2 5/8” Al len Bolt ( #92), two Ø 7/8” x 5/8” Pul ley Bushi ngs ( #56), and one M10 Air craft Nut (#102).
DIAGRAM 11 22.
Low er Cable Loop Diagram 23.
STEP 12 (See Diagram 12 & Butterfly Cable Loop Diagram) A.) Clip one end of the 96” Butterfly Cable (#45) to the open slot on the Right Butterfly (#10). B.) Dr aw the Cabl e to the open bracket on the rig ht side of the Rig ht Vertical Frame (#4).
25.
Butterfly Cable Loop Diagram 26.
STEP 13 (See Diagram 13 and Upper Cable Loop Diagram) A.) Attach the 130’” Upper Cabl e (#44) to the front opening on the Left Upper Frame (#34) . Attach a Pulley (#67) to the opening . Secure it w ith one M 10 x 3 ½ ” Allen Bol t (#90), tw o Ø 7/8” x 1” Pulley Bushings (#53), and one M10 Ai rcraft Nut (#102) .
DIAGRAM 13 28.
Upper Cable Loop Diagram 29.
STEP 14 (See Diagram 14) A.) Attach the end of the 103” Leg Pr ess Cable (#47) to the bracket on the Leg Press Frame (#36). Secur e it w ith a M10 x 1 ¾” All en Bolt (#94) , two Ø ¾ ” W ashers (#100), and one M10 Airc raft Nut (#102). B.) Dr aw the Cabl e to the first open bracket on the front of Left Base Frame (#32).
DIAGRAM 14 31.
Leg Press Cable Loop Diagram 32.
STEP 15 (See Diagram 15) A.) Attach four W eig ht Stack Cover s (#41) to the Ri ght Upper Frame (#1) and R ight Base Fr ame (#31). B.) Secure each W eight Stack Cover with tw o M10 x 5/8” All en Bolts (#96) and Ø ¾ ” W ashers (#100).
PA RTS LIST KEY NO. DESCRIPTION Q’ty 1 Right Upper Fram e 1 2 Front Pres s Base 1 3 Front Press 1 4 Right Vertical Fr ame 1 5 Back rest Support Fam e 1 6 Seat Post 1 7 Right Seat Support 1 8 Leg Dev.
MP-4500 WEIGHT RESISTANCE CHART WEIGHT PLA TE Station 1 2 3 4 5 6 7 Low Pulley 22 33 44 55 66 77 88 Lat Pull 30 40 50 60 70 80 90 Leg Developer 26 38 50 62 74 86 98 Leg Press 36 60 84 108 132 156 180 .
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be f ree fr om def ects in work m anship and mater ial, under normal use and service conditions , for a period of two y ears on the Fram e f rom the date of purc hase.
デバイスImpex MARCY MP-4500の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Impex MARCY MP-4500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはImpex MARCY MP-4500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Impex MARCY MP-4500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Impex MARCY MP-4500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Impex MARCY MP-4500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はImpex MARCY MP-4500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Impex MARCY MP-4500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちImpex MARCY MP-4500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
